LORD D1 Guida all'installazione
Bezpečnost
HOUSEHOLD
DISHWASHERS
Availability of spare parts and Repair and Maintenance Information
Bezpečnost
Availability of spare parts
The following spare parts can be ordered by professional repair shops at this email
address: [email protected], with the subject of the message „Spare parts order (a)“
motor;
circulation and drain pump;
heaters and heating elements, including heat pumps (separately or bundled);
piping and related equipment including all hoses, valves, filters and aquastops;
structural and interior parts related to door assemblies (separately or bundled);
printed circuit boards;
electronic displays;
pressure switches;
thermostats and sensors;
software and firmware including reset software;
In the e-mail message attach a photo of the rating label of the product for which you are
ordering a spare part, the name of the spare part and the number of ordered units.
The following spare parts can be ordered by professional repair shops and end users
at this email address: [email protected], with the subject of the message „Spare parts
order (b)“
door hinge and seals, other seals, spray arms, drain filters, interior racks and plastic
peripherals such as baskets and lids;
In the e-mail message attach a photo of the rating label of the product for which you are
ordering a spare part, the name of the spare part and the number of ordered units.
Important information
1.1 Important information
1.1.1 Purpose
1.2 Explanation of symbols
1.2.1 Danger levels
1.2.2 Hazard symbols
1.2.3 Structure of the warnings
1.2.4 General symbols
Safety
2.1 General Safety instructions
2.1.1 All domestic appliances
Tools and aids
Repair
4.1 Replacing worktop
4.1.1 Removing worktop
4.1.2 Installing worktop
4.2 Installing basket system
4.2.1 Installing a tab slide for the 86 cm model
4.2.2 Installing cup support clip
4.2.3 Installing steamer insert
4.3 Replacing varioDrawer
4.3.1 Removing varioDrawer
4.3.2 Installing varioDrawer
4.4 Replacing spray arms
4.4.1 Removing spray arm
4.4.2 Installing spray arm
4.5 Replacing filters
4.5.1 Removing filter
4.5.2 Installing filters
4.6 Installing baking sheet spray head
4.7 Replacing power cord
4.7.1 Unplugging power cord
4.7.2 Plugging in power cord
4.8 Replacing detergent cover
4.8.1 Removing detergent cover
4.8.2 Inserting spring
4.8.3 Installing detergent cover
4.9 Replacing wastewater pump cover
4.9.1 Removing wastewater pump cover
4.9.2 Installing wastewater pump cover
4.10 Replacing side panel
4.10.1 Removing side panel
4.10.2 Installing side panel
4.11 Replacing outer door
4.11.1 Removing outer door
4.11.2 Installing outer door
4.12 Replacing control panel
4.12.1 Removing control panel
4.12.2 Installing control panel
4.13 Fix door springs
4.14 Replacing toe panel
4.14.1 Removing toe panel
4.14.2 Installing toe panel
4.15 Replacing base socket plate
4.15.1 Removing base socket plate
4.15.2 Installing base socket plate
4.16 Replacing overflow conduit
4.16.1 Removing overflow channel
4.16.2 Installing overflow conduit
4.17 Replacing inner door
4.17.1 Removing inner door
4.17.2 Installing inner door
4.18 Replacing door hinge
4.18.1 Removing door hinge
4.18.2 Installing door hinge
4.19 Replacing (lower) door seal
4.19.1 Removing the door seal
4.19.2 Installing the door seal
4.20 Replacing (upper) door seal
4.20.1 Removing door seal
4.20.2 Installing door seal
Maintenance Information - D1
Model D1, EAN: 4251539600339, Serial number: 1xxxxxxxxx21153960033x
Concerning this document
1.1 Important information
1.1.1 Purpose
These repair hints support consumer to repair appliances by himself according to the
applicable eco-design regulation (as of 03/2021).
They contain information how to exchange defined spare parts including warnings and
risks.
In case of questions, please contact our customer service. We will only be liable for
damages if the repair hints have been followed properly.
1.2 Explanation of symbols
1.2.1 Danger levels
The warning levels consist of a symbol and a signal word. The signal word indicates
the severity of the danger.
Warning level Meaning
Danger Non-observance of the warning message
will result in death or serious injuries.
Warning Non-observance of the warning message
could result in death or serious injuries.
Caution Non-observance of the warning message
could result in minor injuries.
Notice Non-observance of the warning message
could result in damage to property.
Table1: Danger levels
1.2.2 Hazard symbols
Hazard symbols are symbolic representations which give an indication of the kind of
danger.
The following hazard symbols are used in this document:
Hazard symbol Meaning
General warning message
Danger from electrical voltage
Risk of explosion
Danger of cuts
Danger of crushing
Important information
Hazard symbol Meaning
Danger from hot surfaces
Danger from strong magnetic field
Danger from non-ionizing radiation
Table2: Hazard symbols
1.2.3 Structure of the warnings
Warnings in this document have a standardised appearance and a standardised struc-
ture.
Danger
Type and source of danger!
Possible consequences of ignoring the danger / warning.
▶Measures and prohibitions for preventing the danger.
The following example shows a warning that warns against electric shock due to live
parts. The measure for avoiding the danger is mentioned.
Danger
Risk of electric shock due to live parts!
Death by electrocution
▶Disconnect appliances from electrical supply at least 60 seconds
before starting repairs.
1.2.4 General symbols
The following general symbols are used in this document:
Gen. symbol Meaning
Identification of a special tip (text and/or
graphic)
Identification of a simple tip (only text)
Identification of a link to a video tutorial
Gen. symbol Meaning
Identification of required tools
Identification of required preconditions
Identification of a condition (if ..., then ...)
Identification of a result
Start Identification of a key or button
[00123456] Identification of a material number
Status Identification of displayed text / window
(in the appliance's display)
Table3: General symbols
Important information
Safety
2.1 General Safety instructions
2.1.1 All domestic appliances
Risk of electric shock due to live parts!
¡Errors by repairs involving electrical components can lead to electrical shock!
¡Disconnect the appliance from the mains for at least 60 seconds before starting
work.
¡After the repair have a safety test according VDE 0701 or country-specific regula-
tions performed.
Risk of injury from sharp edges!
¡Wear protective gloves.
Risk of crushing during repair, maintenance, troubleshooting and service due to
heavy and moving components
¡Wear protective shoes.
¡Secure heavy components from falling down.
¡Do not stick body parts into moving components.
Risk to the appliance's safety / function!
¡Only use original spare parts.
Risk of damage to electrostatically sensitive components (ESDs)!
¡Do not touch the modules, including connections and conductor paths.
Safety
Tools and aids
Designation Details Images
Screwdriver Torx
T20 with bore hole
[00340764]
100mm, for screws with safety
pin
Insulated Screw-
driver Torx T15 with
bore hole
[15000626]
Blade length 125mm, for
screws with safety pin
Slotted screwdriver Blade 10mm x 1.6mm x
200mm
Needle nose pliers
[00340871] Length: 200mm, straight
Tools and aids
Repair
4.1 Replacing worktop
Prerequisite:
Appliance is disconnected from the power supply.
Appliance is freely accessible.
4.1.1 Removing worktop
1. Remove the two screws at the back (1) (optional).
2. Press both catch levers under the worktop upwards (2).
3. Lift the worktop slightly at the front (3).
4. Push worktop away towards the rear (4).
5. Remove worktop.
4.1.2 Installing worktop
1. Lock the rear of the worktop into the guides using the retaining collars (1).
2. Push worktop forwards (2).
3. Press the front of the worktop downwards until both catch levers click audibly into
place (3).
4. Screw in the two screws again (4) (optional).
Repair
4.2 Installing basket system
Prerequisite:
The relevant basket has been removed from the appliance.
4.2.1 Installing a tab slide for the 86 cm model
Required tools:
Tabguide [00614935]
Cup support clip [00618565]
1. Insert the tab slide diagonally at the front of the basket.
2. Centre and click the tab chute into place.
4.2.2 Installing cup support clip
Required tools:
Tabguide [00614935]
Cup support clip [00618565]
When washing cups, the cup support clip can be folded up. The addi-
tional angle reduces the collection of water on the bottom of cups. In the
case of tall glasses we recommended leaving the cup support clip folded
down.
If upper baskets have an optional plastic insert, they must first be re-
moved.
1. Remove the plastic insert.
2. Click the cup support clip into place.
3. Fold up the clip.
Repair
Indice
Altri manuali LORD Lavastoviglie
