Lorex L4202 Manuale utente
IP Video Router and TLR-DVR
Controller (Video Web Server)
L4202
FOR MORE INFORMATION
WWW.STRATEGICVISTA.COM
BEFORE OPERATING THIS SYSTEM, PLEASE READ THIS MANUAL THOROUGHLY
AND RETAIN IT FOR FUTURE REFERENCE
Thank you for purchasing the Lorex®IP Video Router and TLR-DVR Controller. This is
an internet based digital video server capable of connecting upto 2 channels of video
sources to distribute their compressed live video into Intranet-Internet through Ethernet
connection. It also enables DVR series products and cameras to connect to the internet
for remote monitoring or remote control.
This is a self-contained Web Server so users can access the camera server by
browsing the website over the internet using a standard browser,such as Explorer or
Netscape, and do all the management, configuration and monitoring easily.
The system contains an image compression chipset that is capable of delivering
standard JPEG and real-time video into a limited network bandwidth.
To learn more about this system or to find out more about our products available,
please visit our website at:
www.strategicvista.com
CAUTION !
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Explanation of two Symbols
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateraltriangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON
THE BOTTOM OF THE SYSTEM.
“WARNING –TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THE UNIT TO RAIN OR MOISTURE”
!
-i-
NOTE
This equipment has been certified and found to comply with the limits regulated by
FCC, EMC and LVD. Therefore, it is designed to provide reasonable protection
against interference and will not cause interference with other appliance usage.
However, it is imperative that user follows this manual's guidelines to avoid improper
usage which may result in damage to the unit, electrical shock and fire hazard or
injury.
In order to improve the feature functions and quality of this product, the specifications
are subject to change without notice from time to time.
FCC CLASS B NOTICE
Note:
This equipment has been tested and found to comply with the limits For a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, (which can be determined by
turning the equipment off and on), the user is encouraged to try to correct the
interference by one or more of the following measures:
•Increase the separation between the equipment and the camera and/or monitor.
•Connect the equipment into an outlet on a circuit different from that to which the
monitor/DVR or cameras are connected.
•Consult the dealer or an experienced radio or television technician for help.
STRATEGIC VISTA CORP.
www.strategicvista.com
-ii-
CONTENTS:
GENERAL PRECAUTIONS---------------------------------------------------------------------------------------
FEATURES -----------------------------------------------------------------------------------------------------------
PACKAGE CONTENTS -------------------------------------------------------------------------------------------
Getting StartedGetting Started
IP ADDRESS ---------------------------------------------------------------------------------------------------------
REAR PANEL ---------------------------------------------------------------------------------------------------------
BOTTOM PANEL-----------------------------------------------------------------------------------------------------
HARDWARE CONNECTION AT SERVER SITE-------------------------------------------------------------
Static IP SettingStatic IP Setting
SOFTWARE INSTALLATION-------------------------------------------------------------------------------------
IP SETTING------------------------------------------------------------------------------------------------------------
Video Web Server SETTING--------------------------------------------------------------------------------------
DVR REMOTE SETTING-------------------------------------------------------------------------------------------
PIN CONFIGURATION----------------------------------------------------------------------------------------------
CONNECTING TO A PC VIA THE INTERNET----------------------------------------------------------------
Dynamic IP SettingDynamic IP Setting
WHAT IS A DYNAMIC IP ADDRESS----------------------------------------------------------------------------
SOFTWARE INSTALLATION-------------------------------------------------------------------------------------
SYSTEM RESET------------------------------------------------------------------------------------------------------
DDNS REGISTRATION FOR A DYNAMIC IP ADDRESS--------------------------------------------------
CONNECTING THE PC TO A ROUTER / ROUTER LOGIN-----------------------------------------------
ROUTER SETTING--------------------------------------------------------------------------------------------------
IP SETTING------------------------------------------------------------------------------------------------------------
VIDEO WEB SERVER SETTING---------------------------------------------------------------------------------
DVR REMOTE SETTING-------------------------------------------------------------------------------------------
PIN CONFIGURATION----------------------------------------------------------------------------------------------
CONNECT ALL DEVICES------------------------------------------------------------------------------------------
CONNECTING TO A PC VIA THE INTERNET---------------------------------------------------------------
Operation GuideOperation Guide
SOFTWARE OPERATION AT THE REMOTE SITE --------------------------------------------------------
CONTROL PANEL & BASIC OPERATION -------------------------------------------------------------------
PLAYBACK OPERATION ----------------------------------------------------------------------------------------
ADVANCED SETTING --------------------------------------------------------------------------------------------
FAQ’S -------------------------------------------------------------------------------------------------------------------
SPECIFICATIONS ----------------------------------------------------------------------------------------------------
APPENDIX#1 DVR CONTROL -----------------------------------------------------------------------------------
APPENDIX#2 SENDING E-MAIL ---------------------------------------------------------------------------------
APPENDIX#3 SOFTWARE DOWNLOAD ----------------------------------------------------------------------
REFERENCE NOTES------------------------------------------------------------------------------------------------
CARE & MAINTENANCE-------------------------------------------------------------------------------------------
1
2
3
3
4
4
5
6
8
9
11
12
13
14
14
14
14
16
19
21
22
24
24
25
25
26
27
28
29
32
33
34
36
37
38
39
-iii-
GENERAL PRECAUTIONS:
1. Read Instructions
All of the safety and operating instructions should
be read and understood before the product is used.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.
3. Heed Warnings
All warnings on the product and the instruction
manual should be followed.
4. Follow Instructions
All operating and use instructions should be followed
for optimal performance
5. Cleaning
Disconnect this video product from the power supply
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Attachments
Do not use attachments not recommended by the
video product manufacturer as they may cause
hazards.
7. Water and Moisture
Do not use this product near water -for example,
near a bathtub, wash bowl, kitchen sink, wet
basement, or near a swimming pool.
8. Accessories
Use this product only with a stand, tripod, bracket or
table recommended by the manufacturer or sold
with the product. Any mounting of the product
should follow the manufacturer’s instructions.
9. Ventilation
This product should never be placed near or over a
radiator or heat register. This product should not be
placed in a built-in installation, such as a book case
or rack, unless proper ventilation is provided or the
Manufacturer’s instructions have been adhered to.
10. Power Source
This product should be operated from the type of
Power source indicated by the marking label. If you
are not sure of the type of power supply to your
location, consult your product dealer or your local
Power company
11. Power Cord Protection
Power supply cords should not be routed so that
they are likely to be walked on or pinched by items
placed on or near them
12. Lightning
For added protection, unplug this product from its
outlet during a lightning storm. This will prevent
damage to the video product due to lightning and
powersurges
13. Overloading
To avoid the risk of fire and electric shock, do not
plug this product into an over-loadedpower supply.
14. Object and Liquid Entry
Never push objects into the openings of this product
as they may touch dangerous voltage points that
may result in fire or electric shock. Never spill
liquid of any kind on this product.
15. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
voltage or other hazards. Refer all servicing to
qualifiedservice personnel
16. Damage Requiring Service
Disconnect this product from the power supply
and refer servicing to qualified service
personnel under the following conditions:
a. When the power supply cord or plug is damaged
b. If objects have fallen into the product
c. If the product has been exposed to rain or liquids
d. If the product does not operate normally by
following the instruction manual. Adjust only
the controls that are covered in the instruction
manual as an improper adjustment may result
in damage and will often require extensive work
by a qualified service technician to restore
the product to its normal operation
e. If the product has been dropped or the cabinet
has been damaged
f. When the product displays a distinct change in
performance -this indicates a need for service
17. Replacement Parts
When replacement parts are required, be sure the
technician uses replacement parts specified by
the manufacturer. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
18. Safety Check
Upon completion of any service to this product
ask the service technician to perform safety
checks to determine that the product is in
proper working condition.
19. Grounding or Polarization
This product is equipped with a three-wire
grounding-type plug, a plug having a third
(grounding) pin and will only fit into a
grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug
into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
20. Power Lines
An outside antenna system should not be
located in the vicinity of overhead power lines
or other electric light or power circuits, or where
it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
21. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
22. Heat
The product should be situated away from heat
such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
-1-
CAUTIONS:
1. All the warnings and instructions of this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use
water damped cloth for cleaning
3. Do not use this unit in very humid and wet places
4. Keep enough space around the unit for ventilation. Slots andopenings of the cabinet should
not be blocked.
5. During flashes of lightning or cracks of thunder, or when the system is not used for a long time,
unplug the system power supply and disconnect the cables toprotect the unit from lightening
or power surges.
Features
•Compatible with most CCTV Products.
•Empowers all video output devices watching and controlling on the Internet or LAN.
•Auto Network Reconnection (ANR).
•Support alarm triggers recording & watch dog function.
•Support Dynamic IP address via a Router.
•Support 4 alarm inputs.
•Duplex function, record and playback simultaneously at client site.
•Auto e-mail warning system & images uploading function (to FTP site) that will remind you
if an external alarm was triggered.
•Intelligent non-stoppable recording function after ANR.
•Support Multi AP screens and HTTP display (IE browser).
•Unique video player.
-2-
PACKAGE CONTENTS:
-3-
IP Video Router & TLR-DVR Controller Owner’s Manual & CD
CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE
SYSTEM, INCLUDING THE COMPONENTS SHOWN ABOVE.
Power Adapter & Cord
GETTING STARTED:
Terminal block Crossover LAN cable
Before installation, contact your ISP (Internet Service Provider)
for your own IP address.
Note : The bundled software is compatible with the following Windows operating
systems : WIN2000, WIN2003 and WINXP. It is not recommended to use with WIN98
& WIN ME, which may cause system conflictions with the software.
CONTROL -REAR PANEL:
-4-
1. LAN
Connect the RJ45 Crossover LAN cable to the internet, or directly to a PC
2. ACT & LINK LED’s
When these LED’s are blinking it indicates that the network is in operation
3. VIDEO INPUT (BNC, 2 channels)
Connect to a video source, such as a camera or DVR video output.
4. ALARM I/O (optional for advanced applications)
Connect control devices, such as a PTZ Camera, DVR, Motion Sensors, external
alarm signal inputs, etc
5. POWER
Plug in the supplied power adaptor (12V / 500mA).
RESET BUTTON (at the bottom of the Video Web Server)
Push this button for more than 5 seconds to reset the setting back to the default
setting.
BOTTOM PANEL :
3
Bottom
1 2 3 4 5
-5-
HARDWARE CONNECTION AT SERVER SITE:
A.ConnectionStructure
NOTE: The RS-485 to control
the DVR is optional.
1. Connect the video output of the camera or DVR to the video input of the Video Web Server.
2. Connect the PC to the Video Web Server for IP setting.
3. Connect the Video Server to the ADSL or CABLE MODEM with a Static IP address.
4. Connect PC with Internet and remote control Video Web Server.
B.Connection Application
-6-
STEP 1: SOFTWARE INSTALLATION –STATIC IP SETTING:
1. Put the attached CD into the CD-ROM. Theapplication program will install on your PC.
Note: The CD contains a self-running installation that automatically starts when the CD is
inserted. Follow the instructions for installation as indicated in the next few pages.
2. Press “Next”.
3. Choose the destination location and press “Next”.
Altri manuali per L4202
1
Indice
Altri manuali Lorex Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza