Lorex DMC2161 Manuale utente

Altri manuali per DMC2161

4

Indice

Altri manuali Lorex Telecamera di sicurezza

Lorex

Lorex LKB353A Series Manuale utente

Lorex

Lorex W281AA Series Manuale utente

Lorex

Lorex CVC2032 Manuale utente

Lorex

Lorex LH060 Series Manuale dell'operatore

Lorex

Lorex LNB3143R Series Manuale utente

Lorex

Lorex CVC6997HR Manuale utente

Lorex

Lorex SG7120 Manuale utente

Lorex

Lorex LEV4712 Series Manuale utente

Lorex

Lorex LEV2522 Series Manuale utente

Lorex

Lorex SG7125 Manuale utente

Lorex

Lorex CVC6995HR Manuale utente

Lorex

Lorex CVC6950 SERIES Manuale utente

Lorex

Lorex LEV1522 SERIES Istruzioni operative e di manutenzione

Lorex

Lorex LW1740 SERIES Manuale utente

Lorex

Lorex E896DD Series Manuale utente

Lorex

Lorex Add-On Camera LW2451AC1 Manuale utente

Lorex

Lorex VANTAGE LDC7081 Manuale utente

Lorex

Lorex SG620R Manuale utente

Lorex

Lorex mCAM DMC2030 Manuale di istruzioni

Lorex

Lorex VQ1030R Manuale utente

Lorex

Lorex LNB3163 series Manuale utente

Lorex

Lorex SG620 Manuale utente

Lorex

Lorex LNB4421 Series Manuale utente

Lorex

Lorex LNB3153 Series Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente

Copyright © 2007 Lorex Technology Inc.

DMC2161

Installation instructions on Microsoft Windows Vista Operating System

Lorex mCam software version 2.0.1 and above is compatible with Microsoft Windows

Vista™ Operating System.

The Video Driver for DMC2161 has been upgraded to work on Windows Vista and a dedicated

driver directory “DVS Driver for Vista” is included on your installation CD and posted to the

Lorex website (www.lorexcctv.com/support).

While Lorex is continuing its efforts to upgrade the audio driver of the DMC2161 camera to work

in a Windows Vista environment, mCam software does support audio using any external audio

device (e.g. microphone) that is compatible with Windows Vista. Please note that both video

and audio are fully supported in Windows XP.

If during your installation on a Microsoft Windows Vista Operating System you get a message

that your driver was not successfully installed

OR

Please follow the steps below to complete the installation:

1. Open the Device Manager:

•Click Start / Settings / Control Panel / Device Manager

•Click the ‘Continue’ Button on the ‘Microsoft Management Console’ window to

continue. The Device Manager window will open.

•A list of all System Devices will be displayed. Right Click on the “DVS Composite

Device” listed under Universal

Serial Bus Controls, and select

“Update Driver Software”

NOTE: If the device is not

displayed, click on the ‘+’ beside

the Universal Serial Bus

Controllers option.

2. Browse for the Driver location

www.lorexcctv.com

Copyright © 2007 Lorex Technology Inc.

3. Click the ‘Browse’ button to select the Driver

Location. This will typically be either the CD

ROM drive, or the location where you saved

the “DVS Driver for Vista” (.after downloading

from the website)

4. You will get a status message indicating that

the installation was successful. Click the

‘Close’ button to exit the Update Window.

5. If prompted with the ‘Found New Hardware’

window, select the option ‘Don’t show this

message again for this device’. The Window

will close after selecting this option.

NOTE: You will see a yellow exclamation mark

near the audio device on the Device Manager

screen. This indicates that the audio from the

camera is not active.

6. Launch the mCam application by clicking Start / Programs / Lorex mCam)

www.lorexcctv.com