Lowell COMPAC ACSP-2002-HW Manuale utente
Models: ACSP-2002-HW, ACSP-2002-IG-HW, ACSP-2002-GTF-HW,
ACSP-2002-VTE-HW, ACSP-2002-IG-VTE-HW, ACSP-2002-RPC-HW, ACSP-2002-IG-RPC-HW
COMPAC®20A Surge Suppressor hardwired
©2012 Lowell M nuf cturing Comp ny, 100 Integr m Dr., P cific MO 63069. Phone–800.325.9660
F x—636.257.6606. Lowell m kes every effort to provide ccur te inform tion while reserving the right to
ch nge specific tions nd/or improve m nuf cturing methods without notific tion. (lowellmfg.com)
Spec. No. 1128
(rev. 02.08.12)
pg. 1 of 3
Model No. Description Outlets Amper ge Termin tion GTF Over/Under Protection Remote Control C p ble
ACSP-2002-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No No No
ACSP-2002-VTE-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No Yes No
ACSP-2002-RPC-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No No Yes
ACSP-2002- G-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No No No
ACSP-2002- G-VTE-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No Yes No
ACSP-2002- G-RPC-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No No Yes
ACSP-2002-GTF-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired Yes No No
ACC-1ME Mounting Ears (1-pr)
Description
The COMPAC®advanced surge suppressor provides the highest
current capacity available in devices of its size to protect multiple
pieces of sensitive electronic equipment on a single circuit. t fea-
tures industrial strength “zero failure” technology backed by a ten
year warranty. t also includes a patented* rotating outlet plate that
makes it easy to change the position of the outlets from top to side
access. The compact body has a very low profile (1.75"H x 6"D x
9"W) and includes two mounting brackets to promote easy instal-
lation — on a wall behind a flat panel TV, under a counter, in a
rack or just about anywhere. Terminates to 6-ft. non-metallic flex-
ible whip that can be field-cut to shorter lengths.
• Model No. ACSP-2002-HW: features (2) 20A outlets (1 duplex)
• Model No. ACSP-2002-VTE-HW: features (2) 20A outlets (1
duplex) and VTE over/under protection that automatically turns
receptacles off when line voltage drops below 100V or rises
above 140V.
• Model No. ACSP-2002-RPC-HW: features (2) 20A outlets and
remote power control capability by a low voltage sequencer,
switch or control system that provides a maintained dry contact
closure.
• Model No. ACSP-2002-IG-HW: features (2) 20A insulated
ground outlets (1 duplex).
• Model No. ACSP-2002-IG-VTE-HW: features (2) 20A insulated
ground outlets (1 duplex) and VTE over/under protection that
automatically turns receptacles off when line voltage drops
below 100V or rises above 140V.
• Model No. ACSP-2002-IG-RPC-HW: features (2) 20A insulated
ground outlets and remote power control capability by a low
voltage sequencer, switch or control system that provides a
maintained dry contact closure.
• Model No. ACSP-2002-GTF-HW: features (2) 20A insulated
ground outlets (1 duplex) plus a ground transient filter. The
patented GTF technology filters potentially damaging electro-
magnetic transients/noise on the ground wire. The GTF installs
in series with the ground line of electrical circuits to attenuate
high frequency transients without impeding 60Hz fault current.
t introduces less than 0.1 ohm at 60Hz to the ground circuit
thereby assuring proper operation of any and all overcurrent
protection devices (circuit breakers, fuses, etc.). The GTF pro-
vides significant attenuation at higher frequencies where the
most damaging transients exist. At 1MHz, for example, the GTF
attentuates ground noise by 25dB which can be the difference
between a sensitive system functioning continuously or having
an interruption or “reset” occurence.
*US P tent No. D535178S
All versions of the 20A hardwired
COMPAC include 6-ft. non-metallic
flexible whip and mounting brackets.
ACSP-2002-HW
Features
• ETL Listed, ANS C62.41 Compliant, conforms to UL1449-3
• Low-profile chassis (1.75”H x 6”D x 9”W)
• Rotating outlet plate that rotates 90º for front or side access.
• LEDs provide visual system status
• Suppresses line to neutral with no ground contamination.
• TCR®technology defeats surges up to 72,000 amps with zero
failures
• Two mounting brackets allow versatile installation. (Optional
mounting ears are available if standard 19” rackmount instal-
lation is preferred.)
• Terminates to 6-ft. non-metallic flexible whip
• 10 year warranty
A & E Specifications
The 20A single-circuit surge suppressor shall be Lowell Model ___
with one duplex outlet. t shall be ETL Listed and conform to UL1449-
3. t shall meet ANS C62.41 and protect line to neutral without ground
wire contamination. t shall be capable of protecting electronic equip-
ment from transient voltages, spikes and surges up to 72,000 amps
and have a response time of less than 5 nanoseconds. t shall surface
or rear rackmount using mounting brackets and include outlets
mounted on a plate that can be rotated 90º for front or side access. t
shall include LEDs for visual ground verification and surge diagnos-
tics. [Model _____ shall include insulated ground outlets. Model ____
shall include automatic over/under voltage shutdown protection when
voltage drops below 100V or rises above 140V. Model _____ shall
include remote power control capability (by a low voltage sequencer,
switch or control system that provides a maintained dry contact clo-
sure). Model _____ shall include a ground transient filter.]
Optional mounting
ears (ACC-1ME) are
available if standard
19” rackmount instal-
lation is preferred.
Spec. No. 1128
(rev. 02.08.12)
pg. 2 of 3
©2012 Lowell M nuf cturing Comp ny, 100 Integr m Dr., P cific MO 63069. Phone–800.325.9660
F x—636.257.6606. Lowell m kes every effort to provide ccur te inform tion while reserving the right to
ch nge specific tions nd/or improve m nuf cturing methods without notific tion. (lowellmfg.com)
Models: ACSP-2002-HW, ACSP-2002-IG-HW, ACSP-2002-GTF-HW,
ACSP-2002-VTE-HW, ACSP-2002-IG-VTE-HW, ACSP-2002-RPC-HW, ACSP-2002-IG-RPC-HW
COMPAC®20A Surge Suppressor hardwired
T p / Fr nt Panel Lay ut
ACSP-2002-HW
ACSP-2002-GTF-HW
ACSP-2002-VTE-HW
ACSP-2002- G-HW
ACSP-2002- G-VTE-HW
ACSP-2002- G-RPC-HW
ACSP-2002-RPC-HW
Mechanica Specifications:
Dimensions: 9"W x 1.75"H x 6"D
Weight: 5 lbs.
nput Connections: Attached EC cord with NEMA 5-20P plug
Output Connections: (1) duplex 20A receptacle mounted on 90˚
rotatable plate.
Chassis: Steel with black powder epoxy finish
Mounting: (2) mounting brackets
Ground Transient Fi ter Specifications (ACSP-2002-GTF-HW):
Operating Voltage: 120 VAC
Operating Current: 20 Amps
DCR: .035 ohms
mpedance: 60 Hz: .06 ohms
100 kHz: 100 ohms
1 mHz: 1 Kohm
Performance Specifications:
Operating Voltage/Current: 120VAC / 20A, 60Hz
Maximum Surge Current: 72,000A (exceeds UL1449-3 6000V, 3000A)
nitial Clamping Voltage: 205V, UL rating 400V
Endurance: EEE C62.41-1991, B3 (C1), Pulses (lifetime):
1kv≥1,000,000; 3kv≥100,000; 6kv≥5000
Transient Noise Reduction: 29dB@100kHz, 70dB@1MHz
Response Time: Less than 5 nanoseconds
Temperature Range: 25˚C (77˚F) nominal
Protection Mode: Line to neutral, zero ground leakage
UL1449-2 Adjunct Results: 1000 surges, 6000 volts, 3000A, C1, and B3
waveforms ( EEE C62.41), NO FAILURES
Federal GSA specs (1996) Grade A, Class 1, Mode 1
Diagnostic LEDs (surge)** Top (green): ON = ground verified
Center (green): ON = protection active
Bottom (red): ON = protection reduced*
Applicable Standards: UL1449-3, EEE standard 587-80 A & B, EEE
standard C62.41-1991, EC 1000-4-5-1995
( EC 801-5).
Safety Agency Approvals: ETL Listed US and Canada.
**TCR®surge suppression technology provides the ssur nce of Gr de A, Cl ss 1, Mode 1
endur nce nd perform nce testing plus visu l di gnostic LEDs. The ground verified (green
LED), protection ctive (green LED) should lw ys be ON nd the reduced protection (red
LED) should be OFF. In the unlikely event the red LED illumin tes, full suppression c p bility
is NOT immedi tely or even necess rily compromised. The red LED indic tes the over ll life
expect ncy of the unit m y be reduced. Cont ct Lowell for rep ir or repl cement under the
unit’s ten ye r w rr nty.
All versions of the 20A hard-
wired COMPAC include 6-ft.
non-metallic flexible whip and
mounting brackets.
Models: ACSP-2002-HW, ACSP-2002-IG-HW, ACSP-2002-GTF-HW,
ACSP-2002-VTE-HW, ACSP-2002-IG-VTE-HW, ACSP-2002-RPC-HW, ACSP-2002-IG-RPC-HW
COMPAC®20A Surge Suppressor hardwired
©2012 Lowell M nuf cturing Comp ny, 100 Integr m Dr., P cific MO 63069. Phone–800.325.9660
F x—636.257.6606. Lowell m kes every effort to provide ccur te inform tion while reserving the right to
ch nge specific tions nd/or improve m nuf cturing methods without notific tion. (lowellmfg.com)
Spec. No. 1128
(rev. 02.08.12)
pg. 3 of 3
C ntr l Opti ns f r ACSP-2002-RPC-HW and ACSP-2002-IG-RPC-HW
Surface-mount with
exposed brackets.
Surface-mount with concealed
brackets (behind unit).
Mount to rack rail supports or
10-32 tapped rack rail.
Installati n Opti ns with M unting Brackets
Re-install the 4 screws.
Pull the outlet plate away from the
chassis and rotate.
Remove the 4 screws holding the rotating
outlet plate (2 on front, 2 on top).
R tating Outlet Plate
Changing fr m receptacle utput t hardwired utput
US P tent No. D535178S
Remove receptacle plate and
disconnect receptacle.
Attach conduit with wires to blank knock-
out plate. Splice to receptacle wires.
nstall using screws from receptacle
plate.
Questo manuale è adatto per i seguenti modelli
6
Altri manuali Lowell Protezione da sovratensioni
