Lowrance FishHunter 3D/PRO Manuale utente
www.lowrance.com
ENGLISH
FishHunter 3D/PRO
Operator Manual
| 3
Preface
As Navico is continuously improving this product, we retain
the right to make changes to the product at any time which
may not be reected in this version of the manual. Please
contact your nearest distributor if you require any further
assistance.
It is the owner’s sole responsibility to install and use the
instrument and transducers in a manner that will not cause
accidents, personal injury or property damage. The user of
this product is solely responsible for observing safe boating
practices.
NAVICO HOLDING AS AND ITS SUBSIDIARIES, BRANCHES AND
AFFILIATES DISCLAIM ALL LIABILITY FOR ANY USE OF THIS
PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE
OR THAT MAY VIOLATE THE LAW.
Governing Language: This statement, any instruction manuals,
user guides and other information relating to the product
(Documentation) may be translated to, or has been translated
from, another language (Translation). In the event of any
conict between any Translation of the Documentation, the
English language version of the Documentation will be the
ocial version of the Documentation. This manual represents
the product as at the time of printing. Navico Holding AS and
its subsidiaries, branches and aliates reserve the right to
make changes to specications without notice.
4 |
Copyright
Copyright © 2017 Navico Holding AS.
Warranty
The warranty card is supplied as a separate document.
In case of any queries, refer to the brand web site of your
display or system:
www.lowrance.com
Declarations and conformance
This equipment is intended for use in international waters as
well as inland waters and coastal sea areas administered by
countries of the USA, E.U. and E.E.A.
Compliance Statements
This equipment complies with:
• CE under 2014/53/EU Directive
• The requirements of level 2 devices of the Radio
communications (Electromagnetic Compatibility)
standard 2008
• Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
| 5
The relevant Declaration of conformity is available in the
product’s section at the following website:
www.lowrance.com
Industry Canada
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
Warning
The user is cautioned that any changes or modications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment generates ,uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
6 |
radio communications. However, there is no guarantee that
the interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
dierent from that of the receiver
• Consult the dealer or an experienced technician for help
About this manual
This manual is a reference guide for operating the FishHunter
portable sh nder.
Important text that requires special attention from the reader
is emphasized as follows:
¼Note: Used to draw the reader’s attention to a comment
or some important information.
Trademarks
FishHunter™, Directional Casting™, Lowrance® and Navico®
are registered trademarks of Navico Holding AS.
| 7
Contents
7 Contents
8 Overview
16 Menus and settings
29 Coverage and modes
35 3D Structure mapping
38 3D Fishing
40 Bathymetric mapping
45 Ice shing asher
49 Technical specications
8 | Overview | FishHunter 3D/PRO Operator Manual
Overview
Features labelled with an asterisk (*) are only available for
FishHunter 3D.
FishHunter 3D/PRO is a powerful sh nder created for
Apple and Android phones and tablets. The sonar oats on
the surface of the water where it tracks water temperature,
water depth, bottom contour and sh locations. FishHunter
transducers can be casted from a bank or dock as well as
trolled behind your boat or used for ice shing.
The FishHunter 3D/PRO wireless sh nder sonar connects
to your smartphone/tablet via Wi-Fi using our free software
app, so you don’t need to have a cell tower connection or use
your cellular data to use your new sh nder.
Using our free FishHunter software app, you will also have
the ability to access and store critical shing information like
your favorite shing spots, your catch details and share your
information with your friends and other anglers.
|9
Overview | FishHunter 3D/PRO Operator Manual
A
B
FishHunter 3D
2
14 5
3
C
D
Bottom view
D
E
Front view
B
A
FishHunter PRO
A. Night-time sh attraction illumination
B. Towing point
C. 5 Tri- Frequency transducers (381KHz, 475 KHz, 695 KHz)
D. USB charging port
E. Tri-Frequency transducer (381KHz, 475 KHz, 675 KHz)
10 | Overview | FishHunter 3D/PRO Operator Manual
Charging
1. Locate the 3 pin charging port on
the bottom of the sonar. It is on the
opposite side from the tow point at the
back of the sonar
2. Push the USB cord into the bottom of
the sonar so that it is in snugly. You
must slide the charge cord past the
transducer on the bottom of the sonar
which makes it slightly dicult to get
the charge cord into the side of the
unit. This is the correct way to ensure a
good connection with your sonar.
3. Plug the USB cord into USB charger. A
red light will appear on the top of the
sonar and stay on until fully charged.
Connecting
1. Download theFishHunter app from the Google play store
or iOS app store.
2. Create an account by opening the app and following the
steps on the screen. Be sure to do this before you leave
Indice
Altri manuali Lowrance Fish Finder
Lowrance
Lowrance ELITE-4X HDI Manuale utente
Lowrance
Lowrance ELITE TI Manuale utente
Lowrance
Lowrance StructureScan 3D Manuale utente
Lowrance
Lowrance HDS Gen2 Touch Manuale utente
Lowrance
Lowrance HDS Carbon Manuale utente
Lowrance
Lowrance 5 HDI Manuale utente
Lowrance
Lowrance LCX-18C Manuale utente
Lowrance
Lowrance HDS-5 Manuale utente
Lowrance
Lowrance Hook Reveal Series Manuale utente
Lowrance
Lowrance Fish Finder Manuale utente
Lowrance
Lowrance ELITE-4X HDI Manuale utente
Lowrance
Lowrance HDS Gen3 Touch Manuale utente
Lowrance
Lowrance Elite-3x DSI Manuale utente
Lowrance
Lowrance LMS-320 Manuale utente
Lowrance
Lowrance Speed Sensor Manuale utente
Lowrance
Lowrance Elite-5 DSI Manuale utente
Lowrance
Lowrance HOOK-4x Manuale utente
Lowrance
Lowrance Elite FS Manuale utente
Lowrance
Lowrance Elite-5 HDI Manuale utente
Lowrance
Lowrance HDS-5x Manuale utente
