LS PRO Systems LS XP1 Manuale utente
USER MANUAL
Professional Light Systems for
Health, Sports, Fitness & Vitality
ENHANCE PERFORMANCE
ACCELERATE RECOVERY
INTELLIGENT LIGHT THERAPY
CONTENTS
Introduction
2
Warnings & Cautions
3
Testing & Checking your Device
5
Products
6
Getting Started LS XP3 & LS XP6 Port Controllers
7
Getting Started LS XP1 Port Rechargeable
9
Maintenance
11
Warranty
12
Specifications
14
ENHANCE PERFORMANCE
ACCELERATE RECOVERY
INTELLIGENT LIGHT THERAPY
3
INTRODUCTION
LS PRO LIGHT SYSTEMS PRODUCT DESCRIPTION
Congratulations on choosing LS PRO Systems to support your Sports, Health
and Vitality needs. Your LS PRO Light System is a specially designed therapeutic
healing device, delivering 880nm in infrared light, 660nm in red light and
465nm in blue light wavelengths to the body’s tissue resulting in therapeutic
effects.
The LS PRO therapy time can be controlled by the user and supports up to
9 LS PRO pads, which can be used simultaneously or individually to suit the
user’s needs.
LS PRO CONTROLLERS
> LS XP1 – 1 Port Rechargeable
> LS XP3 – 3 Port Personal
> LS XP6 – 6 Port Professional
LS PRO NEOPRENE FLEXI PADS CAN INTERACT WITH ALL
CONTROLLERS ABOVE
> LSG 264 General Pad – red and infrared diodes
> LSG 264B General Pad – blue and infrared diodes
> LSH 155 Head Cap – red and infrared diodes
> LSL 132 Local Pad – red and infrared diodes
> LSL 132B Local Pad – blue and infrared diodes
> LSF 104 Face Pad – red and blue diodes
> LST 90 Target Pad – red and infrared diodes
> LSB 80 Boot Pad – red and infrared diodes
> LSP 200 PEMF/Light Combo Pad – red and infrared diodes
INDICATION FOR USE
The LS PRO Systems products are designed to apply LED (light-emitting diode)
light with associated gentle therapeutic warmth in the red, infrared and blue
wavelengths of light to the user, which increases circulation and relaxes muscles.
Users may expect benefits such as temporary relief of muscle spasm; relief to
minor muscle and joint aches, pain and stiffness.
2
SUPPORT@LSPROSYSTEMS.COM TEL: 321 987 9424
WARNINGS & CAUTIONS
WARNINGS
> Do not stare directly into the diodes or the lights’ reflection in a mirror
as that could cause temporary irritation of the eyes. Prolonged exposure
to the light with the naked eye could harm your eyes.
> Keep the equipment away from children and pets.
THE LS PRO LIGHT SYSTEM IS AN ELECTRICAL DEVICE. TO
AVOID ELECTRIC SHOCK ADHERE TO THE FOLLOWING
> Do not drop your device in water or liquids.
> Do not wash electrical parts with water or liquids.
> Do not directly touch the device or connect power with wet hands.
> Do not apply or touch the device to wet or damp skin.
> Do not pull, carry or lift the device by its cord. If the cord to your
product is damaged do not use the device.
> Do not use the device if it has been dropped, left outside or has
encountered water or liquids.
> Do not use on or near heated surfaces.
> Do not operate this device in areas where it could be exposed to
flammable or combustible products or where vapors may be present.
Explosion or fire may occur.
> This device is not to be used by disabled, sleeping or unconscious persons.
REPAIRS
> Do not modify or attempt to modify or repair this equipment. There are
no user-serviceable parts.
> If this equipment is modified in anyway, appropriate inspection must be
taken to ensure continued safe use.
> Please contact customer service on 321-987-9424 or email
[email protected] if you have any concerns with the usage
of your device.
TEL: 321 987 9424 SUPPORT@LSPROSYSTEMS.COM
3
CAUTIONS
If you are taking any medications or products which make you sensitive
to light, we recommend that you consult your doctor or physician prior
to use. Some medications, such as for colds, allergies, pain medicine and
drugs to treat infections might cause light sensitivity (See Testing for Light
Sensitivity on page 5).
> Do not use the device on open wounds, as heat may increase
circulation and cause bleeding.
> This device contains neoprene. If you are or believe yourself to be
allergic to neoprene, do not use this product without first consulting
a physician.
> Do not use this device in combination with liniments, salves, ointments
or balms that contain heat-producing ingredients as a skin burn
could occur.
Consult your doctor prior to using if you are:
> Pregnant
> Are taking drugs known to cause sensitivity of skin to light
> Have any suspicious or cancerous lesions
> Recently had a steroid injection or use topical steroids
1. Do not use this device on infants.
2. If you experience discomfort or have a concern about use of the device,
stop use immediately and contact your doctor.
3. Use indoors only.
4. Use supplied power supply only.
5. Unplug from outlet when not in use to avoid tripping hazards.
6. Do not unplug by pulling directly onto the cord. Grasp the plug itself,
not the cord when unplugging from the outlet.
7. Do not exceed 40 minutes of use in one therapy session.
4
SUPPORT@LSPROSYSTEMS.COM TEL: 321 987 9424
TESTING & CHECKING YOUR DEVICE
TESTING FOR LIGHT SENSITIVITY
Before starting your first therapy session, we recommend that you check for light
sensitivity. You only need to do this once to test if you are sensitive to light by
turning on your device, then placing the LS light therapy pad on your forearm.
Keep the LS light therapy pad in place for 2 minutes and once finished set the LS
light therapy pad aside.
Check forearm after 2-5 minutes to see if any reaction has taken place.
If you see any redness or a rash contact our customer service team via
321-987-9424 or support@lsprosystems.com
CHECKING YOUR DEVICE
Your product is designed to last for many years with normal and proper use.
It has been monitored and tested to FDA regulations during its manufacturing
process. When the device is working properly, the LEDs should emit light from
the LS light therapy pads on the underside*.
* Note. Infrared diodes are at the invisible end of the light spectrum, as long as
the visible red and/or blue lights are lit on the pad, then the infrared lights are
working too.
DO NOT look directly into the light. Shine the light onto the palm of your hand
to see if the LS light therapy pads are working.
If the LS light therapy pad does not emit any light, please contact our customer
service team on 321-987-9424 or email support@lsprosystems.com and
one of our team members will be available to help you.
TEL: 321 987 9424 SUPPORT@LSPROSYSTEMS.COM
5
SIMPLE EXAMPLES OF PAD PLACEMENT
LS PRO SYSTEM PRODUCTS
6
SUPPORT@LSPROSYSTEMS.COM TEL: 321 987 9424
LSP 200 PEMF/Light Combo
LS XP1 Port Rechargeable
LS XP3 Port Personal LS XP6 Port Professional
LSG 264
General Pad (Red)
LSL 132B Local
Pad (Blue)
LST 90 Target
Pad
LSH 155 Head Cap
LSF 104 Face
Pad
LSB 80 Boot
Pad
LSG 264B
General Pad (Blue)
LSL 132 Local
Pad (Red)
TEL: 321 987 9424 SUPPORT@LSPROSYSTEMS.COM
7
LS XP3 & LS XP6 PORT
OPERATIONAL PICTURES
3.
Two Pin Male Adapter
9.
Power Switch
5.
DC Power Input
7.
5 Pin Light Pad Ports
6.
5 Pin Plug
11.
Mo de B utt o n
10.
LED Mode Indicator
1.
Power Cable
2.
Power Adapter/Connector
8.
Velcro strip
4.
Power Cable & Adapter
A
GETTING STARTED
LS XP3 & LS XP6 PORT CONTROLLERS
The LS PRO System comes with everything needed to start your light therapy
experience. For the best results please read this manual completely before you
start using your LS PRO System.
The LS PRO System may be used multiple times per day, with a recommended
therapy session for 20 to 40 mins. Your LS XP3 or LS XP6 Port Controllers
automatically switch off after a 20 min session. An immediate second 20 min
session works by moving the pad/s to different areas of the body.
Open all your products and check you have everything listed on the
product check sheet.
POWERING ON
(ONLY USE THE BLACK POWER ADAPTOR)
1.
Locate Black Power Cable (fig. 1) and Black Power Adaptor (fig. 2).
2.
Connect the two by plugging the two-pin male adaptor (fig. 3) into the Power
Adaptor (fig. 2).
3.
Assembled Power Cable & Adaptor complete should look like (fig. 4). Connect
Power to the wall socket.
4.
Plug the male connector (red circled fig. 4) into the DC Power Input on the back
of your controller (fig. 5).
5.
Proceed by plugging in your choice of pad/s using 5 pin plug (fig. 6) pushed into
the 5 pin port on the back of your controller (fig. 7).
6.
Secure your light pads to the desired area of the body with Velcro straps
provided (fig. 8).
7.
Switch on the power to your controller (fig. 9), this may be followed by a beep
and the LED Mode Indicator display should light up (fig. 10).
8.
Choose your desired setting by pressing the mode button (fig. 11) repeatedly
(see simplified frequency guide).
9.
Relax and enjoy the session.
8
SUPPORT@LSPROSYSTEMS.COM TEL: 321 987 9424
TEL: 321 987 9424 SUPPORT@LSPROSYSTEMS.COM
9
10.
Power/Mode Button
5.
DC Power Input
8.
5 Pin Light Pad Port
7.
5 Pin Plug
9.
Velcro Strap
12.
Splitter
11.
LED Mode Indicator
4.
Power Cable/Charger
1.
Power Cable
3.
Two Pin Male Adapter
2. Power Charger/Connector
LS XP1 PORT RECHARGEABLE
OPERATIONAL PICTURES
6.
Charging indicator
B
Questo manuale è adatto per i seguenti modelli
11
Indice
