Ltech WiFi-RDM01 Manuale utente
Fast searching
Long-range maintenance
Firmware upgrade
Address programmable
Convenience testing
Product features
WiFi-RDM01 is the RDM master control, which browsing
and setting corresponding parameters of the equipment
with RDM protocol through the RDM standard protocol.
WiFi-RDM01 can be compatible with other brand's
product with RDM protocol, and it does not affect the
normal operation of other products when hangs on
the bus.
WiFi-RDM01 uses the WiFi module, which can wireless
control by the phone's APP and support to upgrade the
firmware remotely. which is convenient for customers'
using the most functional and latest firmware version.
Points: support parameters setting and
firmware upgrade by App.
Power conversion line 1pcs
Technical brochure 1pcs
LED controller 1pcs
Package content
Model:
Name:
WiFi-RDM01
LED controller
-30°C~55°C
110g
Working temp.:
Weight(G.W.):
Certifications:
Wireless type:
Output signal: DMX512 / RDM
2.4GHz Wi-Fi , 802.11b/g/n
Warranty:
Product size:
Packing size:
5 years
125×33×20mm(L×W×H)
127×35×24mm(L×W×H)
Product parameters
33
20
120
125
Unit: mm
5~24Vdc
Input voltage:
DC+ DC- socket
(5~24Vdc)
Power light: red light is on (power is normal).
red light flash (abnormal).
DMX/RDM
signal output
Product structure
Setting button: long press the button for 6s to restore
the factory settings (WiFi default password: led88888).
Communication light:
Blue light flash slowly (initialization).
Blue light is off (configuration complete).
Blue light flash quickly (data transceiver).
Setting button
Power light
Communication
light
DC socket (5~24Vdc)
(φ5.5mm×φ2.5mm)
Product installation
★
5~24V adapter through power conversion line.
The product can be powered by power bank or
The unit can connect with multiple RDM function decoders.
Power bank
Connect resistance on the terminal.
Two options for the power input:
DC+DC-socket & DC socket.
Please use standard RS485 shielded twisted pair
signal cable.
WiFi-RDM01
Lamp
Lamp
Lamp
Power conversion line
APP
iOS / Android
01
Connect the device as follow, then power on it, make
sure the communication light is off.
After confirming that the WiFi-RDM01 has already
matched with the RDM device, follow the instructions
to connect the WiFi through the phone.
.
The factory
default WiFi name is WiFi-RDM01, password: led88888
Attn: if the phone failed to search “WiFi-RDM01" SSID,
please reboot the power supply, and reconnect WiFi
when the communication light is off.
After setting, click " + " in the upper right corner,
“Search” and “Add” button will pop-up.
1. Connect & match
2. Connected WiFi
3. Search & add device
Scan QR code to download the APP via mobile phone.
4. Devices
The device can be edited after searching successfully.
a: Click”Add”, edited the address in corresponding box.
b: Click”ID”, get more product details.
c: Click” ”, enter edited interface.
d: Click”No.”, issue the recognizing command.
a
d
c
b
5. Parameters editing interface
Setting the frequency, bit, curve, modes, dimming range,
screen saver, etc, in parameter interface.
(for different model, the parameter is different,
examples are shown below.)
6. Address setting
Click the “ ”on the top left of home page, enter
“More” interface, and click “DMX address” to set the
address of unicast or broadcast.
WiFi-RDM01
upgrade
DMX device
upgrade
7. Testing and device upgrade
Click “Test” in “More” interface, enter “Test”interface,
testing the lamp types and single channel. Click
“upgrade”, enter “upgrade” interface, the WiFi-RDM01
and the connected DMX driver can be upgraded.
Supporting WiFi-RDM01 upgrade and DMX driver upgrade.
Update time: 2019.09.18_A2
1.
qualified person.
2. This product is non-waterproof. Please avoid the sun
and rain. When installed outdoors, please ensure it
is mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life
of the controller. Please ensure good ventilation.
4. Please check if the voltage of the power supply used
comply with the working voltage of the product.
5. Ensure all wire connections and polarities are
correct before applying power to avoid any damages
to the LED lights.
6. If a fault occurs please return the product to your
supplier. Do not attempt to fix this product by
yourself.
The product shall be installed and serviced by the
No further notice if any changes in the manual.
Product function depends on the goods.
Please feel free to contact your supplier if any question.
Attention
Scan QR code to follow our website
www.ltech-led.com
Altri manuali per WiFi-RDM01
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Ltech Controllori
Ltech
Ltech SE-12-100-500-W1D Manuale utente
Ltech
Ltech DMX-BT-AUDIO Manuale utente
Ltech
Ltech LT-3600RF Manuale utente
Ltech
Ltech LT-3900RF Manuale utente
Ltech
Ltech V3 Manuale utente
Ltech
Ltech WiFi-108 Manuale utente
Ltech
Ltech LT-3800-5A Manuale utente
Ltech
Ltech LT-3800-3A Manuale utente
Ltech
Ltech T4 LED RGBW Manuale utente
Ltech
Ltech LT-3800-6A Manuale utente
Ltech
Ltech WiFi-102-RGBW Manuale utente
Ltech
Ltech DMX-SPI-203 Manuale utente
Ltech
Ltech DMX-SPI-203 Manuale utente
Ltech
Ltech T4 Manuale utente
Ltech
Ltech LT-3900 Manuale utente
Ltech
Ltech TT-DX-R4-5A Manuale utente
Ltech
Ltech WiFi-102-RGBW Manuale utente
Ltech
Ltech WiFi-104 Manuale utente
Ltech
Ltech LT-3600RF Manuale utente
Ltech
Ltech WiFi-102 LED Controller Manuale utente
