LTS LTH-D301GY-WIFI-2 Manuale utente
Two-Wire Indoor Station
Configuration Guide
Two-Wire Indoor Station Configuration Guide
i
Legal Information
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the company website Please use this
Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks Acknowledgement
Trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL OUR COMPANY BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
OUR COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Two-Wire Indoor Station Configuration Guide
ii
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of our devices incorporates privacy by design principles. For example, for device
with facial recognition features, biometrics data is stored in your device with encryption method;
for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a
fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protection laws and regulations, including without limitation, conducting
security controls to safeguard personal data, such as, implementing reasonable administrative and
physical security controls, conduct periodic reviews and assessments of the effectiveness of your
security controls.
Two-Wire Indoor Station Configuration Guide
iii
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided, will or could
result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Note
Provides additional information to emphasize or supplement
important points of the main text.
Two-Wire Indoor Station Configuration Guide
iv
Contents
Chapter 1 Typical Application .....................................................................................................1
Chapter 2 Local Operation ..........................................................................................................2
2.1 Activate Indoor Station .........................................................................................................2
2.2 Quick Operation ....................................................................................................................3
2.3 Configuration Settings...........................................................................................................5
2.3.1 Set Indoor Station Network Parameters ...................................................................5
2.3.2 Set Linked Device IP ...................................................................................................6
2.3.3 Set Indoor Station No.................................................................................................8
2.4 Door Settings .........................................................................................................................9
2.5 Sound Settings.......................................................................................................................9
2.6 Restore Indoor Station ........................................................................................................11
2.7 System Maintenance...........................................................................................................11
2.8 Linked to the Mobile Client.................................................................................................13
Two-Wire Indoor Station Configuration Guide
1
Chapter 1 Typical Application
The typical application of the device is shown as below.
Figure 1-1 Typical Application
Wire the door station to the indoor station with 2-wire cables.
You can activate door station by indoor station.
Set the open duration and other parameters by indoor station.
Refers to the Indoor Station Configuration Guide for details.
Two-Wire Indoor Station Configuration Guide
2
Chapter 2 Local Operation
2.1 Activate Indoor Station
You can only configure and operate the indoor station after creating a password for the device
activation.
Steps
1. Power on the device. It will enter the activation page automatically.
Figure 2-1 Activation Page
2. Create a password and confirm it.
3. Tap OK to activate the indoor station.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
Two-Wire Indoor Station Configuration Guide
3
2.2 Quick Operation
After device activation, the wizard page will pop up.
Steps
1. Choose Language and tap Next.
Figure 2-2 Language Settings
2. Set network parameters and tap Next
–Edit Local IP, Subnet Mask and Gateway parameters.
–Enable DHCP, the device will get network parameters automatically.
Figure 2-3 Network Parameters
3. Configure the indoor station.
1) Choose Indoor Station Type.
2) Edit Floor and Room No.
3) Tap Next.
Two-Wire Indoor Station Configuration Guide
4
Figure 2-4 Indoor Station Settings
4. Linked related devices and tap Next. If the device and the indoor station are in the same LAN,
the device will be displayed in the list. Tap the device or enter the serial No. to link.
Figure 2-5 Related Device
1) Tap the door station in the list to link.
Note
If the door station is inactive, the system will pop up the dialog to activate the door station.
2) Tap to pop up the Network Settings page.
3) Edit the network parameters of the door station manually or enable DHCP to get the network
parameters automatically.
4) Optional: Enable Synchronize Language to synchronize the language of door station with
indoor station.
Two-Wire Indoor Station Configuration Guide
5
5) Tap OK to save the settings.
5. Tap Finish to save the settings.
2.3 Configuration Settings
Configuration settings is required before starting using the indoor station. It is necessary to set the
indoor station network, room No., linked devices, device time display, and so on.
2.3.1 Set Indoor Station Network Parameters
Network connection is mandatory for the use of the indoor station. Set the network parameters
after activating the indoor station. Only when the IP address of the indoor station is in the same
network segment as other devices, it can work properly in the same system.
Steps
Note
The default IP address of the indoor station is 192.0.0.64.
Two ways are available for you to set IP address: DHCP, and set IP address manually.
1. Tap Settings → → Configuration → to enter the network settings page.
Note
Enter activate password as the admin password.
Figure 2-6 Network Settings
Altri manuali per LTH-D301GY-WIFI-2
1
Indice
Altri manuali LTS Sistema di interfono
