LTV LTV-SDNO30-DC Manuale utente
00P677280ZSEB3
Integrated High Speed Dome Camera
Outdoor Dome
Installation Guide
Version 1.3
Installation Guide
1
Preface
Information given in this manual was current when published. The company reserves the
right to revise and improve its products. All specifications are subject to change without
notice.
Notice
This manual provides installation information for the outdoor integrated high
speed dome. To work with the dome cameras, any installer or technician
must have the following minimum qualifications:
•A basic knowledge of CCTV systems and components
•A basic knowledge of electrical wiring and low-voltage electrical
hookups
•Have read this manual completely
Copyright
Under copyright laws, the contents of this installation guide may not be copied,
photocopied, translated, reproduced or reduced to any electronic medium or
machine-readable format, in whole or in part, without prior written permission
of the company.
Important Information
Before proceeding, please read and observe all instructions and warnings in
this manual. Retain this manual with the original bill of sale for future
reference and, if necessary, warranty service. When unpacking your unit,
check for missing or damaged items. If any item is missing, or if damage is
evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your
dealer for assistance.
Regulation
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Installation Guide
2
This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste in
accordance with Directive 2002/96/EC. Instead it shall be
handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By proper
waste handling of this product you ensure that it has no
negative consequences for the environment and human
health, which could otherwise be caused if this product is
thrown into the garbage bin. The recycling of materials will
help to conserve natural resources.
For more details information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
Compliance is evidenced by written declaration from our
suppliers, assuring that any potential trace contamination
levels of restricted substances are below the maximum
level set by EU Directive 2002/95/EC, or are exempted due
to their application.
Installation Guide
3
Warnings and Cautions
•Handle the camera carefully
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handing or storage.
•Installing electricity wiring carefully
Ask qualified personnel of electrical wiring for the installation. Please note
that input electricity to the unit is at tolerance of DC12V/AC24V ± 10%.
The camera is capable of surge protection; ensure AC power model unit
grounded appropriately against damage of heavy current or electric
shock.
Refer to the camera’s installation guide for more information.
AC model data cable AC power input: 3-pin terminal block
•Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no
user serviceable parts inside. Ask a qualified service person for servicing.
•Do not block cooling holes on the bracket
This camera has a cooling fan inside. Blocking the cooling holes leads to
build up of heat the camera and may cause malfunction.
•Do not operate the camera beyond the specified temperature,
humidity or power source ratings
Use the camera under conditions where temperature is between -35°C ~
50°C (-31°F ~ 122°F), and relative humidity is below 90%.
•Do not use strong or abrasive detergents when cleaning the camera
body
Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard
to remove, use a mild detergent and wipe the camera gently.
•Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or
not, never aim it at the sun or other extremely bright objects. Otherwise,
the camera may be smeared or damaged.
Installation Guide
4
Table of Contents
1. Introduction................................................................................................................5
2. Standard Package Content .......................................................................................6
3. Dome Setups and Cable Connection .......................................................................7
3.1 Preparations for Dome Setups ..........................................................................7
3.2 Dome Setups ....................................................................................................9
3.2.1 Switch Definition ..................................................................................9
3.2.2 Communication Switch Setting ..........................................................10
3.2.3 Dome ID Setting ................................................................................10
3.2.4 Dome Control Protocol Setting .......................................................... 11
3.3 Dome Cable Definition and Requirements ......................................................12
3.3.1 Cable Requirements ..........................................................................12
3.3.2 22-Pin Data Cable .............................................................................13
3.3.3 22-Pin Connector Definition...............................................................13
3.3.4 RS-485 Connector Definition .............................................................14
3.3.5 Cable Wiring and Connection ............................................................15
4. Dome Installation.....................................................................................................17
4.1 Dome Dimension.............................................................................................17
4.2 Optional Accessories.......................................................................................17
4.3 Ceiling Mounting with Straight Tube................................................................23
4.4 Wall Mount ......................................................................................................25
4.4.1 Wall Mounting with Gooseneck Tube.................................................25
4.4.2 Mini Pendant Mount...........................................................................26
4.4.3 Wall Box Mounting.............................................................................27
4.5 Corner Mount ..................................................................................................28
4.5.1 Corner Standard Mounting Plate .......................................................28
4.5.2 Corner Thin/Wide Box Mounting........................................................30
4.6 Pole Mount......................................................................................................31
4.6.1 Pole Thin/Wide Direct Mounting ........................................................31
4.6.2 Pole Thin/Wide Box Mounting............................................................32
5. System Expansion...................................................................................................34
5.1 Connecting with Power Box ............................................................................34
5.2 Data Formats Transforming.............................................................................35
5.3 Signal Distribution ...........................................................................................36
5.4 Coaxial Telemetry............................................................................................37
6. System Integration ..................................................................................................38
6.1 Using Pelco Keyboard.....................................................................................38
6.2 Using Philips Allegiant Keyboard.....................................................................39
Appendix A: Technical Specification .............................................................................40
Installation Guide
5
1. Introduction
With weather resistant feature, the Integrated High Speed Dome Camera is
applicable to outdoor installation. The dome camera supports one cabling for
easy installation, and can be integrated with CCTV products, such as DVRs,
Control Keyboards, and CCTV accessories for a total surveillance solution. In
addition, large set of built-in protocols provide connectivity to other
surveillance systems. The built-in protocols include DynaColor, Pelco, VCL,
Philips, AD-422 (Manchester), etc., which allow the Integrated High Speed
Dome Camera to be integrated with other suppliers' surveillance systems.
General Operation Requirements:
A minimum of one control device is required for operation, such as a control
keyboard, a DVR or a PC. The integrated high speed dome camera contains
a built-in receiver that decodes commands from a control device.
Connect dome cameras to other devices, as shown in the diagram below, to
complete a video surveillance system.
NOTE: To extend the network distance up to 1.2 km (4000 feet) and to
protect the connected devices, it is highly recommended to place a
repeater at the mid-point. However, a repeater may be needed in the network
distance less than 1.2 km if the used cables are not the CAT 5, 24-gauge
cables (see 3.3.4 RS-485 Connector Definition). Refer to the repeater’s
manual for detailed information.
Installation Guide
6
2. Standard Package Content
Before proceeding, please check the box contains the items listed here. If any
item is missing or has defects, DO NOT install or operate the product and
contact your dealer for assistance.
Dome Body
50-cm Data Cable for power
supply, video and telemetry
Screws
Optical Cover
50-cm, 13-pin Alarm Cable
Waterproof rubber
Quick Guide
CD: Operation Manuals
Lubricant
Installation Guide
7
3. Dome Setups and Cable Connection
Before installing or connecting the dome camera, please refer to this section
and complete preparations for dome setups and various switch settings.
3.1 Preparations for Dome Setups
The following installation procedure is for the outdoor dome equipped with the
sunshield housing. Please follow the steps below to complete dome housing
installation.
STEP 1
Unpack the dome package and
take out the dome body.
STEP 2
Rotate the top holder and take
it off from the dome body.
STEP 3
Remove the protective cover
and PE sheet.
Installation Guide
8
STEP 4
Attach the dome cover to the
dome body. Before doing that,
apply some lubricant on the
cover’s water-proof rubber to
make the installation process
smoother.
Note that the tiny protrusion on
the dome cover must align with
one of the four holes on the
dome body.
STEP 5
Gently pressure the dome
cover downward with two
hands on the side of it.
DO NOT press the cover, as
shown in the figure; this might
cause damage to the dome
body.
STEP 6
Screw the dome cover and
body together.
Installation Guide
9
STEP 7
Set the switches located on the
bottom of the dome body.
Refer to section 3.2 Dome
Setups for detailed information
about various switch setting.
3.2 Dome Setups
Before connecting the dome camera to other devices of CCTV system,
please complete the dome ID and communication switch settings. These
switches are located on the bottom of the dome camera.
3.2.1 Switch Definition
Please refer to the following figure and table for switch location and
definitions.
A Reserved
B Communication Switch
C Dome ID Switch
D Dome Control Protocol Switch
E RJ-45 Connector (for IP Dome only)
F 22-Pin Connector
G ISP Connector (for FW upgrade)
Indice
Altri manuali LTV Telecamera di sicurezza
