Lumens DC260 Manuale utente
English - 0
DC260 Visual Presenter
Quick Start Guide
English - 1
1. Package Content
DC260 Quick Start Guide User Manual
Remote control CD Base Installation Guide
Software Bag VGA Cable USB Cable
C-Video Cable Remote Control
Holder
Microscope Adapter
Power Cord Padded Carry Bag
(Optional)
RS232 Adapter
(Optional)
Appearance may vary with
country/region.
English - 2
2. Product Overview
(Bottom)
6. DIP switch
3. Control panel
5. Lens
4. LED indicator
1. Lamp
2. Remote sensor
English - 3
2.1 Relative Position of the Presenter and DC260
2.2 Recommended Distance
About 470mm distance between camera and the desktop is
recommended.
Presenter
DC260
Document
English - 4
2.3 Incorrect Use
English - 5
3. System Diagram
PC
PC
Microphone
Projector
Monitor
Television
LCD TV
Speaker
SD Card
English - 6
4. Mounting the DC260 at Desktop
1. Please set up the DIP Switch settings first. Refer to chapter 5 "DIP
Switch Settings" in the DC260 user manual.
2. Please refer to the Base Installation Guide for installation instructions for
all parts.
5. Connecting Devices
5.1 Step 1: Plugging in the Power Outlet
<Note> Appearance of power cord may vary with countries/regions.
5.2 Step 2: Connecting with components
5.2.1 Connecting to a Projector or Monitor
zConnect the VGA Out on the DC260 to the VGA IN on the projector or the
monitor using the VGA cable.
5.2.2 Connecting to a TV
1.Use C-Video cable to connect TV.
AC Outlet
English - 7
2.Adjust DIP Switch Setting
NTSC：America, Taiwan, Panama, Philippine, Canada, Chile, Japan, and Mexico
PAL：Country/region not listed above:
<Note> VGA output is not supported once C-Video output enabled.
<Note> You are unable to use the [Menu] / [Rotate] / [Half Page] /
[Source] / [Record] / [Capture] / [Delete] / [PBP] / [Slide Show]
functions in C-Video mode.
3.Restart the DC260
DIP Switch setting will not be available until restarting the DC260.
5.2.3 Connecting to a LCD TV/ PDP
zUsing the HDMI cable to connect a LCD TV/ PDP
English - 8
Speaker
電腦
5.2.4 Connecting to a Computer
zConnecting to a computer through VGA in
zConnecting to a computer through USB
Connect to USB port then install the supplied queue program. Please refer to
the DC260 user manual 4.6 Installing driver and application queue.
zConnecting to a computer through RS232 (RS232 Adapter is optional)
5.2.5 Connecting to Speaker
English - 9
Microphone
5.2.6 Connecting to Microphone
Altri manuali per DC260
1
Indice
Altri manuali Lumens Telecamera per documenti
Lumens
Lumens CL510 Guida rapida
Lumens
Lumens DC235 Manuale utente
Lumens
Lumens PC170 Manuale utente
Lumens
Lumens DC200 Manuale utente
Lumens
Lumens DC-W80 Manuale utente
Lumens
Lumens DC133 Manuale utente
Lumens
Lumens DC170 Manuale utente
Lumens
Lumens PS760 Manuale utente
Lumens
Lumens DC125 Manuale utente
Lumens
Lumens PS751 Manuale utente
Lumens
Lumens DC155 Manuale utente
Lumens
Lumens DC145 Manuale utente
Lumens
Lumens DC200 Manuale utente
Lumens
Lumens DC125 Guida rapida
Lumens
Lumens 3D101 Manuale utente
Lumens
Lumens PC193 Manuale utente
Lumens
Lumens PS650 Manuale utente
Lumens
Lumens DC235 Manuale utente
Lumens
Lumens DC166 Manuale utente
Lumens
Lumens DC-F20 Manuale utente
