Lumex DSC260 Manuale utente
DSC250 SCALE
for LF1050 / LF1090 Patient Lift
DSC260 SCALE
for LF1030 / LF1031 / LF1031FP /
LF1040 / LF1041 Patient Lift
USER MANUAL
Read these instructions before using the Lumex Lift Scale.
Save these instructions for future reference.
DSC250-INS-LAB-RevC15
2
CONTENTS
INTRODUCTION...................................................................................................3
IMPORTANT SAFETY INFORMATION.........................................................3
INTENDED USE............................................................................................4
SCALE INSTALLATION ON PATIENT LIFT ..........................................................5
DSC250 SCALE COMPONENTS .........................................................................6
DSC250 SCALE INSTALLATION ON LF1050 / LF1090 PATIENT LIFT...............7
DSC260 SCALE COMPONENTS .........................................................................8
DSC260 SCALE INSTALLATION ON LF1030 / LF1031 / LF1031FP / LF1040 /
LF1041 PATIENT LIFT ..........................................................................................9
LIFT SCALE
OPERATION INSTRUCTIONS ............................................................10
KEYBOARD ILLUSTRATION......................................................................10
DISPLAY ILLUSTRATION...........................................................................10
INSTRUCTIONS FOR USE ........................................................................10
LIFT SCALE MAINTENANCE.............................................................................12
CLEANING..................................................................................................12
BATTERY REPLACEMENT........................................................................12
LIFT SCALE SPECIFICATIONS..........................................................................13
LIMITED WARRANTY.........................................................................................14
3
INTRODUCTION
Important Safety Information
WARNING: Important! Read and understand
these instructions before assembling or using
the Lumex DSC250 / DSC260 Lift Scale. If you
do not understand any part of these warnings or
instructions, contact a healthcare professional
for direction in the use of this product. If the Lift
Scale is not properly assembled, personal injury
and damage to the Lift Scale could result.
WARNING: DO NOT use this product
without proper instruction from a healthcare
professional.
WARNING: If components are damaged or
missing, contact your GF distributor immediately.
DO NOT use substitute parts. Use only Lumex
replacement parts. Non-Lumex replacement parts
could cause personal injury and damage to the
Lift Scale.
4
WARNING: This product has a maximum weight
capacity of 600 lb (300 kg). If patient weight
exceeds maximum weight capacity, the scale will
designate overload by displaying “-oL-”. DO NOT
exceed the maximum weight capacity of the lift
being used for measurement.
WARNING: California Proposition 65 WARNING:
This product contains a chemical known to
the State of California to cause cancer and
reproductive or developmental harm.
WARNING: GF Health Products, Inc. assumes no
responsibility for any damage or injury caused
by improper assembly, installation or use of this
product.
Intended Use
The intended use of the DSC250 / DSC260 Lift Scale is
the measurement of patient weight.
5
SCALE INSTALLATION ON PATIENT LIFT
1.
Use the following instructions (DSC250 or DSC260)
to attach the Lift Scale to the appropriate Patient Lift
with the included mounting hardware. Do not use
any other mounting hardware than that provided.
2. Keep the scale in a cool, dry place. If operation
temperature is over 104°F (40°C), the tolerance
will not be accurate within 0.2 lb (0.1 kg).
Recommended storage temperature is 32°F ~158°F
(0°C ~ 70°C).
3. When the low battery indicator ( ) appears in the
lower right corner of the display, replace the
battery (see MAINTENANCE section).
4. If the scale is not used for an extended period of
time, remove the battery.
5. The scale maximum weight capacity is 600 lb
(300 kg). If patient weight exceeds maximum weight
capacity, the scale will designate overload by
displaying “-oL-”.
6
DSC250 SCALE COMPONENTS
Ensure all components shown below are included in
the DSC250 Scale package.
Item Qty Picture Description
1 1 Scale
2 1 Bushing 1220
3 1 Bushing 1020
4 1 Universal bracket
5 2 Pin
6 2 Key ring
7 2 Washer
7
DSC250 SCALE INSTALLATION ON LF1050 / LF1090
PATIENT LIFT
Install DSC250 Scale on LF1050 / LF1090 Patient Lift as
shown above. Item numbers shown are those listed in
the page 6 table.
WARNING: Ensure scale is securely mounted as
shown above before proceeding.
8
DSC260 SCALE COMPONENTS
Ensure all components shown below are included in
the DSC260 Scale package.
Item Qty Picture Description
1 1 Scale
2 1 Bushing 1220
3 1 Bushing 1020
4 1 Universal bracket
5 1 Pin
6 1 Key ring
7 1 Screw
8 2 Washer
9 2 #10 Washer
10 1 Nut
9
DSC260 SCALE INSTALLATION ON LF1030 / LF1031 /
LF1031FP / LF1040 / LF1041 PATIENT LIFT
Install DSC260 Scale on LF1030 / LF1031 / LF1031FP /
LF1040 / LF1041 Patient Lift as shown above. Item
numbers shown are those listed in the page 8 table.
WARNING: Ensure scale is securely mounted as
shown above before proceeding.
10
LIFT SCALE
OPERATION INSTRUCTIONS
Keyboard Illustration
Display Illustration
Instructions for Use
1. Place sling to be used onto spreader bar without
patient/resident/user.
2. Press the scale faceplate On/Zero button to zero-
out the sling weight (this weight will remain zeroed
out until the Off button is pressed).
3. Press the Kg/lb button to select mode you prefer.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Lumex Scala
