LUMIEN CORE Manuale utente

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

INSTRUCTION MANUAL

(LED MODULE)

MODELS

CORE

M4B1

WW PRO

M7B1

RGBW PRO

M8B1

CORE

PRO

Wattage

3.5W / 5.5W

WW: 4.5W

RGBW: 3W

Voltage Range

10-15V

Lumen Output

3.5W: 325 Lumens

5.5W: 435 Lumens

WW: 350 Lumens

RGBW: 158 Lumens

Color Temp

2700K, 3000K

WW/RGBW

CRI

80+

Lifespan

50,000 Hrs.

Finishes

Antique

Housing

Material

Brass

Wet Rated?

IP68

Light Source

Integrated LED

WARNING –To reduce the risk of FIRE OR INJURY TO PERSON:

• Turn off/unplug the fixture and allow to cool before handling; making any adjustments or repairs or replacing the

integrated light module.

• Integrated light module gets HOT quickly. Only touch the switch/plug when turning on.

• Do not touch the lens, guard, or enclosure when hot.

• Keep integrated light module away from materials that could ignite/ combust/ burn.

• Do not touch the integrated light module chip at any time. Use a soft cloth. The oils from skin could damage LED.

WARNING –Risk of Electric Shock:

●Install in accordance with all local codes and ordinances.

●A fixture shall not use tungsten halogen lamps unless the luminaire is marked for such lamps.

IMPORTANT

TRANSFORMER

●Install in accordance with all local codes and ordinances.

●Only use a UL1838 transformer for safety reasons and to ensure full lifespan of the fixture.

●Ensure that the transformer is plugged in to a GFCI protected circuit.

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

FIXTURE

(DO NOT EXCEED 15 VOLTS INPUT)

• Install in accordance with all local codes and ordinances.

●This fixture functions best when the incoming voltage is between 10–15 volts. Voltages outside of this range could

damage the fixture, shorten the life, and cause unsatisfactory performance. The use of improper voltage voids the

product warranty.

LOW VOLTAGE CABLE

• Install in accordance with all local codes and ordinances.

• Be protected by routing near the luminaire, or next to a building structure such as a house or deck.

• Not be buried except for a maximum of 6 inches (15.2 cm) to connect to the main low voltage cable.

• Have the length cut off so that it is connected to a connector within 6 inches (15.2 cm) from a building structure, a

luminaire, or fitting.

It is not recommended to use Quick Clip style connectors because they are not waterproof and can rot creating resistance

and shorts. Only use outdoor rated waterproof wire connectors. Install in accordance with all local codes and ordinances.

LED LIFE

• For maximum light output, adjust lighting circuits to provide between 10-15 volts.

• Voltage can be regulated by adjusting circuit load/run.

• To determine circuit voltage, use a digital voltmeter at the fixture.

INSTALLATION

Recessed Installation

A –Recessed Cap B- Glass Lens C –Silicone Insert D- O-Ring E- LED Module F- O-Ring

G- Female Connector H- Lock Nut I- Assembled Fixture J- PVC Pipe K-Waterproof Wire Nuts

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

Installation Procedure

●Assemble A,B,C,D,E,F, and G into fixture according to the diagram (I).

●Choose the appropriate PVC pipe (J) (Not Included).

●Pull the wire out of the PVC pipe (J) and connect the fixture to the main line with a

waterproof connector (K) (not included).

●Insert the fixture (I), into the PVC Pipe (J).

●For PRO modules, follow the instruction on our LumienPRO’s remote control.

Hanging Installation

A1- Lock Nut A2- Ring Mount B - Female Connector C-O-Ring D- LED Module E- Silicone Insert F- Glass Lens

G –Short Glass Shroud H- Assembled Fixture I- Stainless steel Wire J- Waterproof Wire Nuts

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

Installation Procedure:

•Remove Lock Nut (A1) and replace with ring mount (A2) for hanging installation.

•Assemble A2, B, C, D, E, F, G into fixture according to the diagram (H).

•Fixture should always have the light source facing downward. Using the desired metal cable (l), loop the

cable around the top eyelet and secure as shown above.

•Connect fixture wires to main low voltage supply cable using outdoor rated waterproof (J) wire nuts.

•For PRO modules, follow the instruction on our LumienPRO’s remote control.

Optional Shades

Surface Installation

A1- Lock Nut A2- Mounting Base B - Female Connector C- O-Ring D- Module Housing E- Silicone Insert F- Glass

Lens G –Short Glass Shroud H- Assembled Fixture I-Screws J- Waterproof Wire Nuts

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

Installation Procedure:

●Before installation, unscrew the lock nut (A1) counterclockwise from the module (D).

●Assemble C, D, E, F, G into fixture according to the diagram (H).

●Pre-drill a 1/2 inch hole.

●Pull the female connector (B) through the mounting base (A2).

●Use provided screws (I) to adhere the mounting accessory (A2) to the surface.

●Screw the fixture (H) counterclockwise into the surface mount accessory (A2).

●Connect fixture wires to main low voltage supply cable using outdoor rated waterproof wire nuts (J).

●For PRO modules, follow the instruction on our LumienPRO’s remote control.

Spot Light Installation:

A1- Lock Nut A2- Knuckle B - Female Connector C- O-Ring D- LED Module E- O-Ring F- Spot Light Shade

G –Assembled Fixture H- Waterproof Wire Nuts

Installation Procedure:

•Before installation, unscrew the lock nut (A1) counterclockwise from the module (D), and remove the wire (B)

and O-Ring (C).

•Assemble A2, D, E, F, into fixture according to the diagram (G).

•Connect fixture wires to main low voltage supply cable using outdoor rated waterproof wire nuts (H).

•For PRO modules, follow the instruction on our LumienPRO’s remote control.

Optional Shades

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

Mounting Accessories

Path Light Installation

A1- Lock Nut A2- Riser B- Female Connector C- O-Ring D- LED Module E- Hat F- Spike

G –Assembled Fixture H- Waterproof Wire Nuts

Installation Procedure:

•Before installation, unscrew the lock nut (A1) counterclockwise from the module (D), and remove the wire (B)

and O-Ring (C).

•Assemble A2, D, E into fixture according to the diagram (G).

•Pass the fixture wire through the gap of the spike (F), then screw the spike to the light fixture (G).

•Connect fixture wires to main low voltage wire using outdoor rated waterproof wire nuts (H).

•For PRO modules, follow the instruction on our LumienPRO’s remote control.

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

Optional Caps

Shell Enclosure Installation

Depending on the application, you can choose the following three different installation methods:

Application 1：Hard Surface Mounting

A1- Lock Nut A2- Mounting Base B- Female Connector C- O-Ring D- LED Module E- Fixture Cover F- Securing

Screws G –Mounting Screws H- Anchors I- Waterproof Wire Nuts

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

Installation Procedure:

●Before installation, unscrew the lock nut (A1) counterclockwise from the LED module (D), and remove the

female wire (B) and O-Ring (C).

●Unscrew (F), remove the fixture cover (E), and screw the LED module (D) to the mounting base (A2)

counterclockwise.

●Drill holes on the hard surface and press the anchors (H) into the holes (the package does not include this

accessory).

●Fix the base (A2) to the surface with screws (G) (the package does not include this accessory).

●Connect fixture wires to main low voltage wire using outdoor rated waterproof (H) wire nuts.

●Then use screws (F) to fix the fixture cover (E) onto the mounting base (A2).

●The power wire can be fixed in a variety of ways on site. (See 4th diagram above).

●For PRO modules, follow the instruction on our LumienPRO’s remote control.

Application 2：Wall Installation

A1- Lock Nut A2- Mounting Base B - Female Connector C- O-Ring D- LED Module E- Fixture Cover F- Securing Screws

G –Mounting Screws H- Waterproof Wire Nuts

Installation Procedure:

●Before installation, unscrew the lock nut (A1) counterclockwise from the LED Module (D), and remove the

female wire (B) and O-Ring (C).

●Unscrew securing screws (F), remove the fixture cover (E), and screw the LED Module (D) to the mounting base

(A2) counterclockwise.

●Drill a hole into the wall and feed wire through the hole.

●Fix the mounting base (A2) to the surface with mounting screws (G) (the package does not include this

accessory).

●Connect fixture wires to main low voltage wire using outdoor rated waterproof (H) wire nuts.

●Then use securing screws (F) to attach the fixture cover (E) onto the mounting base (A2).

●The power wire can be fixed in a variety of ways on site. (See 3rd diagram above)

●For PRO modules, follow the instruction on our LumienPRO’s remote control.

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

Application 3：In-Ground Installation

A1- Lock Nut A2- Mounting Base B - Female Connector C- O-Ring D- LED Module E- Fixture Cover

F- Securing Screws G- Nipple (1/2” NPT) H- Spike I- Waterproof Wire Nuts

Installation Procedure:

●Before installation, unscrew the lock nut (A1) counterclockwise from the LED Module (D), and remove the

female wire (B) and O-Ring (C).

●Unscrew securing screws (F), remove the fixture cover (E), and screw the LED Module (D) to the mounting base

(A2) counterclockwise.

●Use securing screws (F) to attach the fixture cover (E) onto the mounting base (A2).

●Pass the power wire through the included nipple (1/2” NPT ) (G) and screw (G) into the hole of mounting base

(A2) . Then screw assembled fixture to spike (H). (spike is not included)

●Prepare a hole in the installation location. Make sure the hole is not larger than the ground spike.

●Install the fixture in the ground and connect fixture wires to main low voltage wire using outdoor rated

waterproof wire nuts.

●For PRO modules, follow the instruction on our LumienPRO’s remote control.

Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com

360°Bollard Installation:

A1- Lock Nut A2- Quick Connect Spike B - Female Connector C- O-Ring D- LED Module E- Module O-Ring

F- 360°Glass Bollard Component G –Assembled 360°Glass Bollard H- Quick Connect Bollard Riser I- Waterproof Nuts

Installation Procedure:

●Before installation, unscrew the lock nut (A1) counterclockwise from the LED Module (D), and remove the

female wire (B) and O-Ring (C).

●Assemble D, E, and F into fixture according to the diagram (G).

●Pass the female cable (B) out of the quick-connect plastic spike (A2), put on the O-Ring (C), and then connect

the Assembled 360°Glass Bollard (G) to the quick-connect plastic spike.

●Prepare a hole in the installation location. Make sure the hole is not larger than the ground spike.

●Install the fixture in the ground and connect fixture wires to main low voltage wire using outdoor rated

waterproof wire nuts.

●If the Assembled 360°Glass Bollard needs to be heightened, you can choose different lengths of quick-connect

extension rods (H).

●For PRO modules, follow the instruction on our LumienPRO’s remote control.

Altri manuali per CORE

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali LUMIEN Luce esterna

LUMIEN

LUMIEN CORE A6B1 Manuale utente

LUMIEN

LUMIEN W3A1-2.5W-27K-BZ Manuale utente

LUMIEN

LUMIEN N4B2 Manuale utente

LUMIEN

LUMIEN D3A1-12W-27K-BZ Manuale utente

LUMIEN

LUMIEN CORE D5A1 Manuale utente

LUMIEN

LUMIEN M4B5-5.5W-27K-R Manuale utente

LUMIEN

LUMIEN N4B3 Manuale utente

LUMIEN

LUMIEN A3A1-5W-30K-BZ Manuale utente

LUMIEN

LUMIEN N4B1 Manuale utente

LUMIEN

LUMIEN CORE D6B1 Manuale utente

LUMIEN

LUMIEN R5A1-10W-27K-BZ Manuale utente

LUMIEN

LUMIEN CORE Manuale utente

LUMIEN

LUMIEN A5A1 Manuale utente

LUMIEN

LUMIEN W3B2 Manuale utente

LUMIEN

LUMIEN A3A3 Manuale utente

Manuali Luce esterna popolari di altre marche

Sealey

Sealey LED37 Manuale utente

nordlux

nordlux VEJERS Guida utente

SImx

SImx ELITE LED LHTC637 Manuale utente

GEV

GEV CAROLINE 10833 Manuale utente

NEBO

NEBO NEB-LSP-0020 Manuale utente

WE-EF

WE-EF PFL540 LED Manuale utente

Lindby

Lindby 9949029 Manuale utente

HEPER

HEPER DOGO Side LW6048.585-US Istruzioni per l'installazione e il funzionamento

HEPER

HEPER LW8034.003-US Istruzioni per l'installazione e il funzionamento

Maretti

Maretti VIBE S 14.6080.04.A Manuale utente

BEGA

BEGA 84 253 Manuale

HEPER

HEPER MINIMO Istruzioni per l'installazione e il funzionamento

LIGMAN

LIGMAN BAMBOO 3 Manuale utente

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuale utente

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuale utente

urban ambiance

urban ambiance UQL1273 Manuale utente

TotalPond

TotalPond 52238 Manuale utente

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuale utente