Lutz MA II Istruzioni per l'uso e l'installazione
IP24 IP54
Translation of the
original instructions
UNIVERSAL MOTORS
MA II / MI 4
en
Please read this manual before starting up.
To be retained for future reference.
0697-501 MA/MI - 12/2020
0697-501 MA/MI - 12/2020
Fig. 7 (Motor MI 4)
Fig. 5Fig. 4 (Motor MI 4)
Fig. 2
Fig. 1 Fig. 3 (Motor MA II)
Fig. 6 (Motor MA II)
3
0697-501 MA/MI - 12/2020
en
Table of Contents
1. Concerning this manual.................................................................................................................... 4
1.1 Terms........................................................................................................................................... 4
1.2 Target groups.............................................................................................................................. 4
1.3 Associated applicable documents............................................................................................... 4
1.4 Warnings and symbols................................................................................................................ 5
1.5 Latest state.................................................................................................................................. 5
1.6 Copyright .................................................................................................................................. 5
2. Safety................................................................................................................................................ 6
2.1 General safety information ......................................................................................................... 6
2.2 Proper use .................................................................................................................................. 8
3. Congurationandfunction .............................................................................................................. 9
3.1Identication............................................................................................................................... 9
3.2Conguration .............................................................................................................................. 9
3.3 Function .................................................................................................................................... 10
4. Transport and storage .................................................................................................................... 10
4.1 Transport................................................................................................................................... 10
4.2 Storage...................................................................................................................................... 10
5. Installation/Assembly and connection ........................................................................................... 11
5.1 Assembly of pump tube and motor........................................................................................... 11
5.2 Connect motor electrically ........................................................................................................ 11
6. Operation........................................................................................................................................ 11
6.1 Operation of the motor with overcurrent release..................................................................... 11
6.2 Operation of the motor with low voltage release (only MA II).................................................. 12
6.3 Operation of the motor without low voltage release ............................................................... 12
6.4 Operation of the motor with electronic speed controller
(only MI 4-230 E, MI 4-120 E, MI 4-100 E)................................................................................. 12
7. Maintenance and servicing............................................................................................................. 13
7.1 Change carbon brushes ............................................................................................................ 13
7.2 Change power cable.................................................................................................................. 13
8. Repairs............................................................................................................................................ 13
9. Waste disposal................................................................................................................................ 13
10. Annex.............................................................................................................................................. 14
Declaration of conformity..................................................................................................................... 15
4
0697-501 MA/MI - 12/2020
en
1. Concerning this manual
This manual
• is part of this product
• is valid for all mentioned series
• describes the safe and proper use in all operating stages
1.1 Terms
User: Single person or organisation who is using the products e.g. customer, user, assistant
Children:Young persons up to and including the age of 14 years.
1.2 Target groups
Target group Task
User ►Retain these operating instructions at the product’s place of use for
future reference.
►Demandthestatoreadandobservetheseinstructionsandthe
additional valid documents, in particular the safety information and
warnings.
►Observe additional regulations and instructions concerning the plant.
Qualiedpersonnel,
installer
►Read, observe and follow these instructions and the additional valid
documents, in particular the safety information and warnings.
Tab. 1: Target groups and their tasks
1.3 Associated applicable documents
Document Purpose
Operating instructions pump tube Safe and proper use of the pump tube.
Supplementary operating instructions for additional delivered components
Tab. 2: Associated applicable documents and purpose
5
0697-501 MA/MI - 12/2020
en
1.4 Warnings and symbols
Warning Level of risk Consequences in case of
non-compliance
DANGER direct danger death or serious injury
WARNING possible direct danger death or serious injury
CAUTION possible dangerous situation light physical injury
NOTICE possible dangerous situation damage of property
Tab. 3: Warnings and consequences in case of non-compliance
Symbol Meaning
Safety information
►Comply with all measures that are marked with a safety sign to prevent injuries or
death.
iInformation / Recommendation
►What to do
→Cross reference
3Requirement
Tab. 4: Symbols and meaning
1.5 Latest state
Pleasendthelateststateofthisoperatinginstructionunderwww.lutz-pumpen.de.
1.6 Copyright
The content of this operating instruction and the images contained in them are subject to the copyright
protectionofLutzPumpenGmbH.
6
0697-501 MA/MI - 12/2020
en
2. Safety
The manufacturer will not be held responsible for any damages resulting from non-compliance of the
overall documentation, in particular for damages in case of non-compliance of the operating instructions.
2.1 General safety information
Observe following regulations before accomplishing all activities.
Product safety
The motor is constructed in conformity with the state of the art and approved safety-related standards.
Danger however can occur during use for life and health of the user or third parties or damage of the
motor and other material assets. Therefore:
• Operate the motor only in a technically sound state, for its proper use, and conscious of safety and
hazardstakingintoaccounttheseinstructions.
• Ensure that these instructions and all associated applicable documents are complete, legible, and stored
in a place that personnel can access at all times.
• Refrain from any manner of working that endangers personnel or uninvolved third parties.
• In case of a safety-relevant malfunction, stop the motor immediately and enlist a responsible person
to rectify the malfunction.
• In addition to the overall documentation, observe the statutory or other safety and accident prevention
regulations, as well as the valid standards and guidelines of the respective operating country.
Modications
Unless the manufacturer has provided its consent in writing, the manufacturer is not liable for interven-
tionsperformedbytheuser(modications)ontheproduct,suchasconversion,alteration,newdesign,
etc.Modicationsnotagreedwiththemanufacturermayhavethefollowingeects,amongothers:
• Functional impairments on the appliance or plant
• Damage to the appliance and other property damage
• Environmental damage
• Personal injuries right through to death
Duties of the operator
Safety-conscious working
• Operate the motor only in a technically sound state, for its proper use, and conscious of safety and
hazardstakingintoaccounttheseinstructions.
• Ensure observance and monitoring of:
- Proper use
- Statutory or other safety and accident prevention regulations
- Safetyprovisionsinhandlinghazardoussubstances
- Valid standards and guidelines in the respective country of operation
• Provide protective equipment.
7
0697-501 MA/MI - 12/2020
en
Personnel qualication
• This device must not be used by children. It may be used by persons of reduced physical, sensory or
mental capacity or by persons lacking in experience or knowledge provided that they are supervised
orhavebeeninstructedinthesafeuseofthedeviceandunderstandtheassociatedhazards.Cleaning
or user maintenance must not be performed by children.
• Ensure that personnel tasked with work on the motor have read and understood these instructions and
all associated applicable documents, particularly safety, maintenance and servicing information, before
they start work.
• Clarify responsibilities, competencies and monitoring of the personnel.
• Ensurethatallworkiscarriedoutbytechnicalqualiedpersonnelonly:
- Assembly, servicing, maintenance work
- Work on the electrics
• Personnel to be trained must only work on the motor under the supervision of technical personnel.
• Personnel holding the motor in their hands during operation will be subjected to vibrations. The upper
limbs are exposed to an acceleration of less than 2.5 m/s².
Statutory warranty
• Duringtheguaranteeperiod,obtainthemanufacturer'spermissionformodications,maintenance
work or alterations.
• Use only original parts.
Duties of the personnel
• Observe the notices on the motor and maintain them in a legible state.
• Use protective equipment where necessary.
• Only perform work on the motor during downtime.
• Ensure that the motor is disconnected before you carry out assembly and maintenance work.
• Aftercompletingalltheworkonthemotor,remountthesafetydevicesinaccordancewithspecications.
8
0697-501 MA/MI - 12/2020
en
2.2 Proper use
• The motor may only be installed in an upright position.
• Observe operating limits.
• Motor may only be operated with pump tube.
If the product and supplied accessories are used for other purposes than the intended purpose, it is the
responsibilityoftheusertocheckthesuitabilityandadmissibility.Productusenotconrmedinwriting
by the manufacturer absolves the manufacturer of any liability.
The manufacturer is not liable for consequences of incorrect treatment, use, maintenance, servicing and
operation of the appliance, as well as normal wear and tear. The same applies if faults arise from inter-
ventionorcongurationsonthepartoftheusernotconrmedbythemanufacturer.
Prevention of obvious misapplication (examples)
• Do not use the motor in or on swimming pools, garden ponds or similar locations.
• Do not immerse the motor in the liquid being pumped.
• Donotpumpammableliquids.
• Donotoperatethemotorinexplosionhazardarea.
9
0697-501 MA/MI - 12/2020
en
3. Conguration and function
3.1 Identication
Rating plate
Rating plate motor MA (example) Rating plate motor MI (example)
1Type of motor 1Type of motor
2Technical data of the motor 2Technical data of the motor
3Serial number of the motor 3Serial number of the motor
4Year of construction of the motor (last two
digits of the serial number e.g. -13 for 2013)
4Year of construction of the motor (last two
digits of the serial number e.g. -13 for 2013)
3.2 Conguration
The motor type MA II and MI 4 are single-phase series-wound motors with the following versions
(→table 6, table 7):
• operating voltage
• power output
• frequency
10
0697-501 MA/MI - 12/2020
en
Versions
Type MA II MI 4
Double-poleon/oswitch 3 3
Single-pole thermal overcurrent release 3 3
Low voltage release Optional –
Protection class I1) II
Protection class IP 54 IP 24
Hmax (m wc)2) 23 21
1)
Motors MA II 3-12, MA II 5-42 and MA II 5-24 correspond to protection class III.
2)ThemaximumdeliveryheadHmax is a value determined by means of a test bench and measured
with water at a medium temperature of approx. 20°C. The measurement is carried out at the pres-
surejointofthepump,withouthose,nozzleorowmeter.Thedeliveryheadachievableinuseis
loweranddependsontheindividualapplication,themediapropertiesandthecongurationofthe
pump.Themaximumdeliveryheadisdependentonthepumpdesign,motoranduid.
Tab. 5: Available electrical designs
3.3 Function
Together with the respective pump tube, the motor types MA II and MI 4 are suitable for pumping
non-ammable,aggressiveandthin-bodiedliquids.
4. Transport and storage
4.1 Transport
Unpacking and checking condition of delivery
►Unpack the motor on receipt and check for transport damages.
►Report transport damages to the manufacturer immediately.
►Check that the consignment is complete as ordered.
4.2 Storage
NOTICE
Damage of property as a result of incorrect storage!
►Store the motor properly.
►StorethemotorprotectedfromweatherinuencesandUVrays.
Altri manuali per MA II
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Lutz Motore
