Luvion Easy Manuale utente

LUVION

Premium Baby products

INSTRUCTION MANUAL

HANDLEIDING

MANUAL D’INSTRUCTIONS

BENUTZERHANDBUCH

INSTRUCTION MANUAL

TABLE OF CONTENTS

INTRODUCTION 2

SAFETY INSTRUCTIONS 2

CONTENTS OF PACKAGE 3

OVERVIEW OF PARENT UNIT MONITOR  4

OVERVIEW OF BABY UNIT CAMERA 5

GETTING STARTED 6

MENU 9

PAIRING 12

TROUBLESHOOTING 14

TECHNICAL SPECIFICATIONS 15

INTRODUCTION

Thank you for purchasing the Luvion Easy. Now, you will be able to see and hear your baby everywhere in and

around the house.

Please keep the original dated sales receipt for your administration and proof of warranty. For service and warranty

issues, you will always be asked for a copy. For warranty issues, you may contact your Luvion dealer or your local

Luvion distributor. More information can be found on our website: www.luvion.com.

This user manual provides you with all information neccesary for a safe, pleasant, and easy use of the Luvion

Easy. Before use, we ask you to thoroughly read this user manual. We ask for your special attention for

the safety instructions below.

LUVION

Delft, The Netherlands

www. luvion.com

SAFETY INSTRUCTIONS

- Keep small parts away from children.

- This product is not intended as a toy. Please refrain children from playing with the product.

- This product is not intended as a substitute for adult supervision.

- Only use the original supplied power chargers.

- Do not use the product in humid conditions or nearby water.

- Always keep the camera and any cords of the power adapters at least 1,5 meter away from the baby.

- Only use the product between 10°C - 35°C.

- Do not attempt to open the product yourself or you may void your warranty, please contact your local

dealer or distributor.

Batteries:

- Fully charge the monitor before rst use, to ensure an optimal battery capacity.

LUVION

Premium Baby products

INSTRUCTION MANUAL

CONTENTS OF PACKAGE

The Luvion Easy includes the following components:

1. 1 x parent unit (monitor)

2. 1 x baby unit (camera)

3. 1 x power adapter for the parent unit

1 x power adapter for the baby unit

4. 1x user manual

Check the package to conrm that you have received the complete system, including all components listed

above.

OVERVIEW OF PARENT UNIT MONITOR

1. LCD display - 2” LCD Screen.

2. Charging LED - indicates the unit is currently charging.

3. Power indicator LED - indicates whether the parent unit is switched on.

4. On/O button - Turns the parent unit ON or OFF.

5. Menu / OK button - Use the Menu / OK button to open the main menu or to conrm a selection.

6. Return / Undo button - Use the return button to return to the previous state or menu.

7. Decrease volume button - Press this button to decrease the volume of the monitor.

8. Increase volume button - Press this button to increase the volume of the monitor.

9. Increase brightness button - Press this button to increase the brightness of the monitor.

10. Decrease brightness button - Press this button to decrease the brightness of the monitor.

11. Vox button - Press this button to switch to VOX mode or to leave the VOX mode.

12. Talk button - Press this button to speak through the baby unit to your child.

13. Microphone - The sounds detected by this microphone will be transmitted to the baby unit (camera)

when the Talk button is pressed.

14. Loudspeaker - Produces the sound from the baby unit.

15. Power connector - Connect the included USB power adapter to power and/or charge the parent unit.

LUVION

Premium Baby products

OVERVIEW OF BABY UNIT CAMERA

1. Light sensor - Allows the baby unit to correct itself under changing light conditions.

2. Camera lens - Detects the visual environment and sends this to the parent unit.

3. Infrared LEDs - Allows for 5m distance of night vision, automatically activates within low lights

conditions.

4. Power indicator LED - indicates whether the parent unit is switched on.

5. Microphone - Detects sound and sends this to the parent unit.

6. Loudspeaker - Enables the ability to talk to your child over distance.

7. Pairing button - Establishes a new connection between the baby and parent unit during the pairing

process. Pairing should be used when installing an additional camera or when the monitor does not

recognize the baby unit. Consult page 12 for more information on the pairing process.

8. On/O button - Use this button to switch the baby unit on or o.

9. Temperature sensor - The measured ambient temperature is displayed on the screen of the parent unit.

10. Power connector - Input for the Luvion power adapter.

GETTING STARTED

INSTALLING THE PARENT UNIT MONITOR

1. Carefully unpack the parent unit (monitor).

2. Connect the power adapter to the parent unit and power socket. The parent unit will start charging;

the indication LED will now light up (red). This LED will turn green when the parent unit is fully charged.

During rst use, please allow the unit to completely charge to ensure optimal battery capacity.

NOTE: CHARGE THE PARENT UNIT COMPLETELY BEFORE FIRST USE.

3. Push the power button up to switch the monitor on. The screen will now show the Luvion introduction

screen.

INSTALLING THE BABY UNIT CAMERA

Before you install the baby unit (camera), carefully plan where and how you want to position it. Make sure

that you take in account the length of the power cable and the position of the power socket, because the

baby unit (camera) needs to be connected to the power grid.

1. Carefully unpack the baby unit (camera).

2. Place the baby unit in the preferred position. You can place the baby unit on a table/cabinet, or you can

mount it on a wall with the provided plugs and screws.

LUVION

Premium Baby products

NOTE:

Before permanently installing the baby unit (camera), make sure that the wireless connection

between the baby unit and parent unit is sucient. Verify this when both the parent unit and baby unit are

placed in the positions from which you would like to use them.

NOTE:

Avoid installing the baby unit near walls or other obstruction between the baby and parent unit. For a

good sound sensitivity and image it is recommended to place the baby unit between a 1,5-3m distance .

3. Connect the power adapter to the baby unit and a power socket.

4. Push the power button up to switch the baby unit (camera) on.The power LED will now light up.

The parent unit will display the video of the baby unit, when both are switched on and within range of each

other. The message“Connecting”will be displayed on the screen of the parent unit when the baby unit is

outside the range of the parent unit or when the baby unit is not switched on or recognized.

USING THE SYSTEM

The video of the baby unit will be displayed

on the screen of the parent unit when both

are switched on. The icons on the screen are

explained below.

1. Signal indicator The signal

indicator shows the strength of the

connection between units. no bars

indicate a poor signal and 4 bars

indicate the strongest signal (see table).

2. Temperature indicator Displays the

temperature measured by the baby

unit.

3. VOX indicator Appears when the VOX

mode is activated.

4. Battery indicator Indicates the

battery life of the parent unit.

5. ‘Talk’-indicator Appears when the talk

button is pressed. You can now talk

through the baby unit.

6. Date and time indicator Displays the current date and time.

Signal strength Indicator Warning

Perfect None

Good None

Fair None

Low Out of Range

No Signal Out of Range

OUT OF RANGE

When the baby unit is positioned too far away

from the parent unit, the message “Connecting...”will

appear on the screen of the parent

unit and the video will start to icker. When

there is no connection between the baby and

the parent unit, the screen of the parent unit will

be black and display the message“Connecting...”

NOTE:

If moving the baby and parent unit

closer together does not help, try pairing the

baby and parent unit. see Pairing chapter.

123

5 6

LUVION

Premium Baby products

Open the menu of the Luvion Easy to change the

device settings.

> Press the OK / Menu button on the parent unit to

open the menu.

> Use the + and - buttons to select a submenu.

> Press the OK button to conrm a selection, marked

with a frame, and open a submenu.

1. Pairing Use this submenu to pair the baby unit

(camera) with the parent unit (monitor).

2. Settings Use this submenu to set the date and

time, temperature settings, anti ickering and the

display backlight.

3. VOX Use this submenu to (de)activate the VOX

mode and to set the VOX mode sensitivity.

4. Languages Use this submenu to set the Language.

5. System Information Use this submenu to display

the installed software and product information.

MENU >

CAMERA

The parent unit (monitor) and the baby unit (camera)

are paired at the factory. You don’t need to repeat this

procedure unless they loose connection.

> Press the Menu / Ok button to enter the main

menu.

> Select the Camera icon and press ok to conrm the

selection and open the Camera menu.

> Press Ok again to start the Pairing procedure.

> A message appears asking if you want to re-

button to conrm.

> You have 10 seconds to briey press the pairing

button on the camera.

> If pairing is successful the message “Register

Successful!”will be displayed.

VOX

123

4 5

MENU >

SETTINGS

You can use the Settings menu to set the time and

date, to change the temperature unit or to set the

backlight brightness and backlight time interval.

> Select the settings icon in the main menu

> Press OK to conrm your selection.

> Move the center button to select the right submenu.

> Press the OK button to conrm your selection.

MENU > SETTINGS >

TIME AND DATE

You can use the Time and date menu to set the date

and time or to change the format of the date and time.

> Press right on the center button to make a

selection.

> Use the up and down side of the center button to

change the selection.

> Press the OK button to conrm or the Back button

to return to the previous menu.

MENU > SETTINGS >

TEMPERATURE UNIT

You can set the temperature unit of measure to Celcius

or to Fahrenheit in this menu.

> Press up or down on the center button to select the

desired temperature unit of measure.

> Press the OK button to conrm, or press the Back

button to return to the previous menu.

MENU > SETTINGS >

LCD BACKLIGHT

You can change the LCD backlight brightness and the

time interval of the baby unit video in this menu. When

the image of the video is too dark, try to increase the

brightness.

The minimum Brightness is one, the maximum

Indice

Lingue:

Altri manuali Luvion Baby monitor

Luvion

Luvion ESSENTUAL Manuale utente

Luvion

Luvion Platinum Manuale utente

Luvion

Luvion SUPREME CONNECT 2 Manuale utente

Luvion

Luvion PLATINUM X Manuale utente

Luvion

Luvion GRAND ELITE 3 CONNECT PLUS Manuale utente

Luvion

Luvion Grand Elite 3 Connect Manuale utente

Luvion

Luvion Grand Elite Manuale utente

Luvion

Luvion Platinum Manuale utente

Luvion

Luvion Digital Audio Baby Monitor Manuale utente

Luvion

Luvion SUPREME CONNECT Manuale utente

Luvion

Luvion Essential Manuale utente

Luvion

Luvion Grand Elite 3 Connect Manuale utente

Luvion

Luvion Platinum 2 Manuale utente

Luvion

Luvion SUPREME CONNECT Manuale utente

Luvion

Luvion Essential Manuale utente

Luvion

Luvion PRESTIGE TOUCH 3 Manuale utente

Luvion

Luvion SUPREME CONNECT 2 Manuale utente

Luvion

Luvion GRAND ELITE 3 CONNECT PLUS Manuale utente

Luvion

Luvion Platinum 4 Manuale utente

Luvion

Luvion ICON DELUXE Manuale utente

Luvion

Luvion Platinum 2 Manuale utente

Luvion

Luvion Grand Elite 2 Manuale utente

Luvion

Luvion easy+ Manuale utente

Luvion

Luvion prestige touch 2 Manuale utente

Manuali Baby monitor popolari di altre marche

Motorola

Motorola MBP15 Manuale utente

Philips

Philips SCD 469 Manuale utente

Oricom

Oricom Babysense 7 Manuale utente

Levana

Levana TW502 Manuale utente

Philips

Philips AVENT SCD841 Manuale utente

NUK

NUK Eco Control Video Display 550VD Manuale utente

Lorex

Lorex sweet peek mini Manuale utente

Mondevices

Mondevices MonBaby 2 Manuale utente

Famidoc

Famidoc FDBB-V2 Manuale utente

Graco

Graco iMonitor 2797 Manuale utente

babymoov

babymoov High Care A014001 Manuale utente

Ramili

Ramili RV1000 Manuale utente

Philips

Philips SBC SC364 Manuale utente

Swann

Swann SW231-FLO Manuale utente

Badabulle

Badabulle Baby Online 300 m+ Manuale utente

Philips AVENT

Philips AVENT SCD526/00 Manuale utente

Uniden

Uniden Guardian UBR223 Manuale utente

Summer

Summer Day & Night 28470A Manuale utente

Luvion easy Manuale utente

Manuali Baby monitor popolari di altre marche