LXE MX7 Manuale utente

MX7 Cradle Reference Guide

E-EQ-MX7DKRG-C

Notices

LXE Inc. reserves the right to make improvements or changes in the products described in this document at any

time without notice. While reasonable efforts have been made in the preparation of this document to assure its

accuracy, LXE assumes no liability resulting from any errors or omissions in this document, or from the use of the

information contained herein. Further, LXE Incorporated, reserves the right to revise this document and to make

changes to it from time to time without any obligation to notify any person or organization of such revision or

changes.

This manual is copyrighted. All rights are reserved. This document may not, in whole or in part, be copied,

photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without prior

consent, in writing, from LXE Inc. Further, LXE Incorporated, reserves the right to revise this publication and to

make changes to it from time to time without any obligation to notify any person or organization of such revision or

changes.

125 Technology Parkway, Norcross, GA 30092 U.S.A. (770) 447-4224

Trademarks:

LXE® and Spire® are registered trademarks of LXE Inc.

RAM® and RAM Mount™ are both trademarks of National Products Inc., 1205 S. Orr Street, Seattle, WA 98108.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LXE,

Inc. is under license.

PowerScan® is a registered trademark of Datalogic Scanning, Inc., located in Eugene, OR.

Symbol® is a registered trademark of Symbol Technologies. MOTOROLA® and the Stylized M Logo are

registered trademarks of Motorola®, Inc.

All other brand or product names are trademarks or registered trademarks of their respective companies or

organizations.

rights reserved. Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems

Incorporated.” Applies.

Important: This symbol is placed on the product to remind users to dispose of Waste Electrical and Electronic

Equipment (WEEE) appropriately, per Directive 2002-96-EC. In most areas, this product can be recycled,

reclaimed and re-used when properly discarded. Do not discard labeled units with trash. For information about

proper disposal, contact LXE through your local sales representative, or visit www lxe com.

Caution

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Attention

II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer

uniquement avec une batterie du même type ou d’un type equivalent

recommandé par le constructeur. Mettre au rebut les batteries usagées

conformément aux instructions du fabricant.

Revision Notice - Rev C: The MX7 Passive Cradle does not secure an MX7 with a boot, but will secure an MX7

with a handle or a strap.

Revision Notice - Rev B: Added Powered Vehicle Mount Cradle and related Accessories. Updated Regulatory

Notices and Safety Statements.

E-EQ-MX7DKRG-C MX7 Cradle Reference Guide

Table of Contents

MX7 CRADLES 1

Introduction............................................................................................................................................1

Suggestions / Notes ..............................................................................................................................1

Desktop Cradle.......................................................................................................................................2

Powered Vehicle Mounted Cradle........................................................................................................2

Passive Vehicle Mounted Cradle..........................................................................................................3

Desktop Cradle LEDs ............................................................................................................................4

MX7 Docked LED................................................................................................................................................4

Spare Battery LED................................................................................................................................................4

MX7 Mobile Device System Status LED .............................................................................................................4

Powered Vehicle Mount Cradle LEDs..................................................................................................5

Vehicle Cradle LED..............................................................................................................................................5

MX7 Mobile Device System Status LED .............................................................................................................5

Tethered Scanners and the MX7 Cradles............................................................................................6

Maintenance...........................................................................................................................................7

Desktop Cradles....................................................................................................................................................7

Vehicle Mounted Cradles .....................................................................................................................................7

Cleaning ................................................................................................................................................................7

MX7 Base Plate Replacement...............................................................................................................................8

Identify Your MX7 Base Plate...........................................................................................................................8

Upgrade The Base Plate.....................................................................................................................................8

Getting Help..........................................................................................................................................10

Manuals...............................................................................................................................................................10

Accessories .........................................................................................................................................................10

DESKTOP CRADLE 13

Quick Start - Desktop Cradle..............................................................................................................13

Suggestions / Notes.............................................................................................................................................13

Components.........................................................................................................................................14

Desktop Mounting Footprint...............................................................................................................16

Preparing the Desktop Cradle for Use...............................................................................................16

Install / Remove MX7 Desktop Cradle Adapter Cup.........................................................................17

Cabling the Desktop Cradle................................................................................................................18

Assemble/Attach the AC Power Adapter............................................................................................................18

Attach a Serial or I/O Connector.........................................................................................................................19

Serial Cable ......................................................................................................................................................19

I/O Cable..........................................................................................................................................................19

Pinout - RS-232 Connector ..............................................................................................................................20

Docking and Undocking the MX7.......................................................................................................21

Battery Charging in a Desktop Cradle...............................................................................................21

Technical Specifications – Desktop Cradle......................................................................................21

Insert / Remove a Spare Battery.........................................................................................................22

POWERED VEHICLE MOUNT CRADLE 23

Introduction..........................................................................................................................................23

Quick Start - Powered Vehicle Cradle ...............................................................................................24

Components.........................................................................................................................................24

Install / Remove Vehicle Cradle Adapter Cup and Top Adapter.....................................................26

ii Table of Contents

MX7 Cradle Reference Guide E-EQ-MX7DKRG-C

Install Adapter Assembly....................................................................................................................................26

Remove Adapter Assembly ................................................................................................................................28

Docking and Undocking the MX7.......................................................................................................29

RAM Bracket Mounting .......................................................................................................................30

RAM Circular Base Footprint.............................................................................................................................31

Vehicle Cradle RAM Ball Assembly...................................................................................................32

Connect Power Supply to Vehicle......................................................................................................33

Vehicle 12V Bare Wire Adapter.........................................................................................................................33

Connect Power Supply to Vehicle Cradle.........................................................................................36

Vehicle Cradle LED............................................................................................................................................36

Attach a Serial or I/O Connector ........................................................................................................37

Serial Interface....................................................................................................................................................37

MX7 I/O Port ......................................................................................................................................................37

Vehicle Cradle Strain Relief Cable Clamp.........................................................................................38

Technical Specifications.....................................................................................................................39

Powered Vehicle Cradle .....................................................................................................................................39

Cradle Power Connector Port .............................................................................................................................39

Pinout - RS-232 Connector.................................................................................................................................40

PASSIVE VEHICLE MOUNT CRADLE 41

Introduction..........................................................................................................................................41

Quick Start - Passive Vehicle Cradle..................................................................................................................41

Components.........................................................................................................................................42

U-Bracket.........................................................................................................................................................42

U-Bracket Footprint ......................................................................................................................................42

RAM Ball and Cylinder ...................................................................................................................................43

RAM Assembly Footprint.............................................................................................................................44

Install.....................................................................................................................................................44

How to Install the Cradle U-Bracket...................................................................................................................44

How to Install the RAM Bracket ........................................................................................................................46

APPENDIX AREGULATORY NOTICES AND SAFETY INFORMATION 49

Cradle Approvals.................................................................................................................................49

INDEX 53

E-EQ-MX7DKRG-C MX7 Cradle Reference Guide

Illustrations

Figure 1 Desktop Cradle ......................................................................................................................................2

Figure 2 Powered Vehicle Mounted Cradle.........................................................................................................2

Figure 3 Passive Vehicle Mounted Cradle...........................................................................................................3

Figure 4 Desktop Cradle Front Label ..................................................................................................................4

Figure 5 Powered Vehicle Cradle Front Label ....................................................................................................5

Figure 6 LXE Tethered Scanners (w/o cable)......................................................................................................6

Figure 7 Desktop Components...........................................................................................................................14

Figure 8 Top.......................................................................................................................................................15

Figure 9 Table Mounting Hole Guides .............................................................................................................16

Figure 10 MX7 Charging Pocket Adapter Cup ................................................................................................17

Figure 11 AC/DC 12V External Power Supply and 3-prong Cable ..................................................................18

Figure 12 Connect Power Cable to the Cradle...................................................................................................18

Figure 13 Serial Connector and I/O Connector .................................................................................................19

Figure 14 Desktop Cradle RS-232 and Pinout....................................................................................................20

Figure 15 Spare Battery Charging Bay ..............................................................................................................22

Figure 16 Vehicle Mount Cradle – Front...........................................................................................................24

Figure 17 Vehicle Mount Cradle – Back ...........................................................................................................25

Figure 18 Charging Pocket Adapter Cup...........................................................................................................26

Figure 19 Retainer Insert ...................................................................................................................................27

Figure 20 Adapter Assembly .............................................................................................................................28

Figure 21 MX7 Docking and Undocking ..........................................................................................................29

Figure 22 RAM Bracket Mounting Points – Cradle Back .................................................................................30

Figure 23 RAM Base Dimensions .....................................................................................................................31

Figure 24 RAM Bracket Components ...............................................................................................................32

Figure 25 Vehicle Power Connection Cable (Fuse Not Shown)........................................................................33

Figure 26 Connecting the Power Cable to the Vehicle ......................................................................................34

Figure 27 Vehicle Connection Wiring Color Codes ..........................................................................................35

Figure 28 Connect Power Adapter Cable to the Vehicle Cradle........................................................................36

Figure 29 Powered Vehicle Cradle Front Label ................................................................................................36

Figure 30 Serial Connector, Power and MX7 I/O Connector............................................................................37

Figure 31 Vehicle Cradle Strain Relief Cable Clamps ......................................................................................38

Figure 32 Slide Clamp Over Cable ....................................................................................................................38

Figure 33 Cradle Power Connector Port ............................................................................................................39

Figure 34 Power Connector Pinout....................................................................................................................39

Figure 35 Vehicle Cradle RS-232 and Pinout....................................................................................................40

Figure 36 Passive Vehicle Mount Cradle and U-Bracket ..................................................................................42

Figure 37 U-Bracket Mounting Dimensions......................................................................................................42

Figure 38 Passive Vehicle Mount Cradle / RAM Ball Assembly......................................................................43

Figure 39 RAM Bracket Components ...............................................................................................................43

Figure 40 RAM Assembly Dimensions .............................................................................................................44

Figure 41 Installing the Cradle U-Bracket .........................................................................................................44

Figure 42 Installing the RAM Assembly ...........................................................................................................46

iv Table of Contents

MX7 Cradle Reference Guide E-EQ-MX7DKRG-C

E-EQ-MX7DKRG-C MX7 Cradle Reference Guide

MX7 Cradles

Introduction

MX7 docking cradles restrain the MX7, re-charge batteries, and enable serial, audio or USB

communication with a PC, scanner, printer or other peripheral device. MX7 keypad data entries

can be mixed with cradle-tethered scanner barcode data entries while the MX7 is in a powered

cradle. Bluetooth device connection and use, while the MX7 is docked, are managed by the MX7

Control Panel Bluetooth program, not the cradle.

Using a wall AC adapter the desktop cradle can also recharge a spare MX7 battery in

approximately 4 hours. The MX7 battery recharging is managed by the docked MX7 power

management configuration. The MX7 can be either On or in Suspend Mode while in the cradles.

The MX7 Vehicle Mount cradles do not have spare battery charging capabilities. Special purpose

and power cables are available from LXE®.

Wireless host/client communications can occur whether the cradles are receiving external power

or not as wireless functions draw power from the main battery in the MX7.

The powered cradles are designed to secure an MX7 with or without a protective

boot (MX7A490PROTBOOTBLK or MX7A491PROTBOOTYEL), a handstrap and/or a

trigger handle.

Important: Use the power cables provided with the MX7 cradle power supply

adapters. The adapters are incompatible with other MX7 power cables.

MX7 Cradles are not certified for use in Hazardous Locations.

Suggestions / Notes

•Remove cables from the base of the MX7 before docking it in a desktop or powered

vehicle cradle.

•Review the Maintenance section titled MX7 Base Plate Replacement and install a new

base plate on the MX7 if necessary.

•Allow clearance above and behind the cradles for inserting an MX7 with a trigger handle.

•Allow clearance behind the cradles for cable connection ease. Allow clearance in front of

desktop cradles for serial and I/O cable connection ease.

•Route cradle cables to ensure they are protected from jostling, tugging or being

disconnected by objects moving nearby.

•Install the pocket insert in the powered cradle charging well for use with an MX7 without

a boot enclosure.

•Remove the cradle insert for use with an MX7 with a boot enclosure.

•Use care when inserting the spare battery into the desktop charging bay. Do not slam the

battery into the bay, as this action could damage the contacts at the base of the charging

bay.

•Keep dirt and foreign objects out of the cradle. Do not short circuit any of the charging

terminals (pins), as this action could result in injury or property damage.

•Refer to the MX7 Reference Guide for information and instruction when using Bluetooth

scanning or printing devices with an MX7 docked in a powered or non-powered cradle.

2 Desktop Cradle

MX7 Cradle Reference Guide E-EQ-MX7DKRG-C

Desktop Cradle

The MX7 Desktop Cradle requires external

power before battery charging and tethered

scanning can commence. The cradle can

charge both the main battery in the docked

MX7 and a spare main battery at the same

time.

Figure 1 Desktop Cradle

See section titled Desktop Cradle, for more information and installation instruction.

Powered Vehicle Mounted Cradle

The Powered Vehicle Cradle requires an

external power source before docked MX7

battery charging and tethered scanning

can commence.

Figure 2 Powered Vehicle Mounted Cradle

See section titled Powered Vehicle Mounted Cradle, for more information and installation

instruction.

Passive Vehicle Mounted Cradle 3

E-EQ-MX7DKRG-C MX7 Cradle Reference Guide

Passive Vehicle Mounted Cradle

The Passive Vehicle Cradle

does not have connectors

that can accept an external

power source or tethered

scanner. It is designed to

secure the MX7 in a

vehicle.

Figure 3 Passive Vehicle Mounted Cradle

See chapter titled Passive Vehicle Mounted Cradle for more information and installation

instruction.

4 Desktop Cradle LEDs

MX7 Cradle Reference Guide E-EQ-MX7DKRG-C

Desktop Cradle LEDs

Figure 4 Desktop Cradle Front Label

MX7 Docked LED

When Docked LED is … It means ….

Off MX7 not inserted or no power applied

Red MX7 docked and power applied.

The cradle must be connected to AC power.

Spare Battery LED

When Spare LED is … It means ….

Off Battery pack not inserted or no power applied

Green Battery pack fully charged

Red Battery pack charging

Yellow / Amber Battery pack temperature out of range

Flashing Red Battery pack fault or failure

The cradle must be connected to AC power. This process does not require an MX7 be in the

docking bay.

MX7 Mobile Device System Status LED

The MX7 System Status LED is located at the top left of the keypad, above the Scan button.

When the LED is . . . The Status is . . . Comment

Blinking Red Power Fail

Replace the main battery with a fully charged

main battery.

Connect the MX7 to external AC power to

allow the internal charger to charge the main

battery e.g. dock in a powered cradle.

Steady Red Main Battery Low

Low Battery Warning. Replace the main

battery with a fully charged main battery. Or

dock the MX7 in a powered cradle.

Blinking Green Display Off No user intervention required.

No Color Good No user intervention required.

Note: The Passive Vehicle Cradle does not have LEDs.

Altri manuali per MX7

Indice

Altri manuali LXE Stazione di attracco

LXE

LXE MX2 Manuale utente

LXE

LXE vx8 karv Manuale utente

Manuali Stazione di attracco popolari di altre marche

Sony

Sony Dream Machine XDR-DS12iP Manuale utente

Acer

Acer USB Type-C Dock II Manuale utente

ATEN

ATEN UC-2000 Manuale utente

Xcellon

Xcellon HDD-202 Manuale utente

Dok

Dok CR09 Manuale utente

Philips

Philips BTM630/12 Manuale utente

IOGear

IOGear Travel Pro GUD3C09 Manuale utente

RKI

RKI SDM-E2 Manuale utente

iHome

iHome iP15 Manuale utente

VITURE ONE

VITURE ONE MOBILE DOCK Manuale utente

Lindy

Lindy 42984 Manuale utente

CipherLab

CipherLab 8001 Manuale utente

Pyle

Pyle PIPDSP2 Manuale utente

Avol

Avol AS2350 Manuale utente

Datalogic

Datalogic JoyaTouch Manuale utente

Philips

Philips DC190/79 Manuale utente

Targus

Targus DOCK315EUZ Manuale utente

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuale utente