M-PT MB-RAD Manuale utente

M-PT Matjeschk-PowerTools GmbH & Co. KG mail@m-pt.de Tel.: +49 (0) 35 796 / 9760

Am Saegewerk 11 www.m-pt.de Subject to technical modifications!

01920 Ralbitz-Rosenthal Status 06/2023

User Manual

MB-RAD

 
MB-RAD 
Seite 2 
Introduction 
Thank you for purchasing this fine RAD product! RAD Torque tools are built in Canada with 
passion and years of experience in design and manufacturing. We highly recommend 
reading this user manual thoroughly in order to understand all aspects of these tools. All 
tool features, our safety instructions and tool maintenance are explained in detail. 
Familiarizing yourself with all the ins and outs of this tool will ensure a long lifetime of the 
tool and a and happy operator. 
On our website you can download the latest software for your RAD tool and you can find 
additional product information such as product videos. See: www.radtorque.eu. 
If you can have further questions, feel free to contact us by phone or e-mail. 
Table of contents 
Introduction___________________________________________________________ 2 
Table of contents ______________________________________________________ 2 
General instructions ____________________________________________________ 3 
Assembly_____________________________________________________________ 3 
Description of functions _________________________________________________ 4 
1. Commissioning _____________________________________________________ 4 
2. Preparing the torque wrench__________________________________________ 4 
3. Switching the torque wrench on _______________________________________ 4 
4. Indicators on the main screen _________________________________________ 5 
5. Operating the torque wrench _________________________________________ 5 
6. Setting the torque __________________________________________________ 5 
7. Extended menu ____________________________________________________ 6 
8. Units _____________________________________________________________ 6 
9. Setting the angle ___________________________________________________ 7 
10. Presets__________________________________________________________ 7 
11. Limit settings ______________________________________________________ 8 
12. Bolt counter _____________________________________________________ 9 
13. Adjustment lock _________________________________________________ 10 
14. Point calibration (MB-RAD only) ____________________________________ 10 
15. Language________________________________________________________11 
16. Check program / Bolt verification ____________________________________11 
17. Data logging ____________________________________________________ 12 
18. Setting the data and time __________________________________________ 13 
19. Operator ID _____________________________________________________ 13 
20. Total counter and maintenance counter ______________________________ 13 
21. Toolkit information _______________________________________________ 14 
22. Diagnosis function _______________________________________________ 14 
23. Button lock _____________________________________________________ 14 
24. Temperature monitoring___________________________________________ 14 
Datalogger PC software ________________________________________________ 15 
1. Adding the torque wrench with Bluetooth in Windows ____________________ 15 
2. Installing the software in Windows ____________________________________ 15 
3. Configuring the software ____________________________________________ 15 
4. Download data from torque wrench ___________________________________ 15 
5. Saving and printing the data _________________________________________ 16 
6. Synchronizing the time _____________________________________________ 16 
Battery______________________________________________________________ 16 
1. Battery pack faults _________________________________________________ 16 
Battery charger _______________________________________________________ 17 
1. Removing and inserting the battery pack_______________________________ 17 
Movement of the reaction arm ___________________________________________ 17 
1. Installing the reaction arm ___________________________________________ 17 
2. Reaction arm height________________________________________________ 18 
3. Reaction arm foot _________________________________________________ 19 
4. Reaction point ____________________________________________________ 19 
Safety _____________________________________________________________20 
Warranty __________________________________________________________20 
1. New tool warranty _______________________________________________20 
2. Repaired tool warranty ____________________________________________ 21 

MB-RAD

Seite 3

3. General instructions

NOTE: Do not operate the tool before reading these instructions. If breakdown,

malfunction or damage occurs, do not attempt to repair, please contact RAD

Torque Systems B.V. immediately.

RAD battery torque wrenches are reversible, non-impacting, torque controlled tightening

tools and must always be operated with the following:

•Fully charged battery.

•Impact sockets with locking pin and o-ring.

•Proper reaction arm with retaining ring.

NOTE: These torque wrenches contain metal components that can be dangerous in

hazardous areas.

4. Assembly

1. Make sure the battery is fully charged.

2. Slide in the battery pack until it engages.

3. Fasten and secure the reaction arm on the jagged side of the gearbox with

the retaining ring.

MB-RAD

Seite 4

5. Description of functions

5.1. Commissioning

•The torque wrench is supplied ready to operate.

•Only components and accessories that do not impair the function and safety of the

torque wrench may be used.

5.2. Preparing the torque wrench

1. Attach the reaction arm (2) to the gearbox of the torque wrench (1).

2. Secure the reaction arm with the retaining ring (3) onto the torque wrench.

3. Attach the socket (4) onto the square of the torque wrench. Use only sockets

with a standardized square in accordance with DIN 3121.

4. Secure the socket with a pin (5).

5. Secure the pin with a snap ring (6) to prevent it from falling out.

5.3. Switching the torque wrench on

When the torque wrench is started, the current time and currently opened

file are displayed. Confirm the screen by pressing the M button. This

screen is displayed only when data logging is active.

MB-RAD

Seite 5

5.4. Indicators on the main screen

•Top left: shows the current direction of rotation

•Top right: torque wrench type (‘40’means MB-RAD 40)

•When the transducer is activated, a blue S is displayed next to the

torque wrench type (B-RAD S series only).

•Centre row: set current torque

•Bottom row: set current angle

•The last result is displayed for 10 seconds

•If an error occurres, the torque on the display turns red. The error can

be acknowledged with any button.

•If the main screen of the torque wrench is active and no buttons are

pressed for 60 seconds, the display switches off

5.5. Operating the torque wrench

•Adjust the settings with the buttons (M), (↑) and (↓) (1).

•The direction of rotation is set with the toggle switch (2).

•Start rotation with the trigger (3).

5.6. Setting the torque

•After being switched on, the torque wrench displays the last set torque.

•The default setting from the factory is 0 Nm.

•The current direction of rotation is displayed at the top left.

•The torque wrench type is displayed at the top right. ‘40’means MB-RAD 40.

•Torque setting is activated by pressing the (M) button briefly.

•The torque indicator now turns yellow.

•The torque is adjusted by pressing (↑)and (↓).

•Pressing and holding (↑)and (↓)adjusts the torque in larger increments.

•Pressing (M) again confi rms the torque.

•The set torque is shown in white.

MB-RAD

Seite 6

5.7. Extended menu

•The extended menu can be opened by using the password. Ask your RAD

distributor for the password.

•The password should be entered under ‘Password’in the main menu.

•The following settings can be implemented in the extended menu:

Advanced settings

•Activate the angle

•Activate the torque limits

•Activate bolt counter

•Deactivating the transducer (B-RAD S series only)

•Point calibration

•Units

•Language

•Unlock (only after consultation your RAD distributor)

•Data logging

Locking the extended menu

5.8. Units

•The torque units can be set in the extended menu.

•The following torque units are possible:

·Newton metres –Nm

·Foot-pound –ft/lbs

·100 setting levels (finer graduations are possible on request)

•Recalibration does not need to be carried out after switching the units.

•A torque chart is required if working in step mode. A torque chart can be obtained

from your RAD distributor.

MB-RAD

Seite 7

5.9. Setting the angle

•To set an angle, the angle option must be activated in advanced settings.

•Setting the angle opens the main screen.

•Torque setting is activated by pressing the (M) button.

•Set the torque.

•Angle can be set after confirming the torque with (M).

•Angle is set by pressing (↑)and (↓).

•Pressing (M) again confirms the angle.

•Angle value can only be set between 10° and 360°.

Please note!

Set torque + angle should not exceed the maximum torque capacity of the tool.

If this threatens to occur, the tool will automatically stop to prevent damage.

5.10. Presets

•The device can store up to 10 user-defined presets.

•In addition, presets are also stored for standardized HV connections.

•Pressing and holding the (M) button opens the main menu.

•Pressing the (M) button again opens the presets menu.

•Here, you can switch between user-defined customer presets and the HV presets.

•The following is displayed in the preset:

·Reference number of the preset

·Name of the preset

·Torque

·Set angle

·Set limits for the final torque

·Set bolt counter

·Selected program (normal or torque check program)

•The presets can be selected with the arrow buttons ( (↑)and (↓)).

•Pressing the (M) button opens a menu with the following functions:

MB-RAD

Seite 8

•‘Accept’ applies the displayed preset as the current setting.

•‘Overwrite’ will store the preset settings in the current preset.

•To save a preset, first enter the desired torque (+ angle) in the

main screen.

•‘Cancel’ returns you to the displayed preset.

•‘Back’ returns you to the presets menu.

•'Back’ returns to the presets menu of the main menu.

•HV preset can only be selected and cannot be overwritten.

•HV preset are displayed only in accordance with the torque range of the torque

wrench.

•The preset tightening torques for HV bolts refer to the modified torque procedure in

accordance with DIN EN 19963-1-8 for k-class K1.

5.11. Limit settings

•Limits are activated and deactivated in advanced settings:

•Limits can be defined for every final torque.

•Angle limits can be defined for purely torque-controlled tightening. The angle

is counted when the torque wrench’s minimum torque is reached and will only be

measured after the tool has reached its minimum torque.

•Limits can be defined for the final tightening torque for torque/angle tightening.

•The limits are entered on the main screen after the torque and angle have been set:

MB-RAD

Seite 9

•The limits are confirmed with the (M) button.

•The limits are also stored when storing as a preset.

•In the event that the limits are not met or are exceeded when operating, an

indicator appears on the screen.

•The torque wrench can be operated again after pressing any button.

5.12. Bolt counter

•The bolt counter is activated and deactivated in advanced settings:

•The bolt counter is set on the main screen:

•Once activated, the bolt counter must be set to a minimum of 1 and can be set

to a maximum of 999.

•The bolt counter counts all completed bolting operations in a clockwise direction.

Counter clockwise will be ignored.

•Once all bolts have been tightened, the device is locked. The device can be released

in two ways:

·Resetting the number of individual bolts.

·Deactivating the bolt counter.

•If the battery is removed from the torque wrench before the bolt counter is

complete, the counter will resume from the same point the next time the torque

wrench is used.

•To prevent the individual bolts from being torqued twice, e.g. by tightening a bolt

that has already been tightened (“rehit”), the counter should be used in combination

with the limit setting. For instance a minimum Angle must be achieved to count as a

correct tightening.

MB-RAD

Seite 10

5.13. Adjustment lock

•The adjustment lock is activated and deactivated in advanced settings:

•If the adjustment lock is active, the torque can no longer be adjusted in the basic

acces level.

•Only torques stored in the presets can be selected.

5.14. Point calibration (MB-RAD only)

Point calibration allows the accuracy of the torque wrench to be increased to a specific

type of bolted joint. Since the B-RAD S has a built-in transducer, Point calibration is not

needed for the B-RAD S.

•To verify the actual torque, a measuring instrument such as a

•Smart Socket™ is required.

•The desired torque is set on the main screen.

•The point calibration can be stored in the presets.

•Point calibration is activated under ‘Point calibr.’ in the extended menu.

•‘Perform 1. bolt’ appears on the display.

•The first bolting operation is then carried out.

•The result obtained from a measurement is showed on the display.

•The second bolt is selected with .

•The second bolting operation is then carried out.

•The result is entered on the display.

•Point calibration is completed with followed by .

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali M-PT Utensili elettrici

M-PT

M-PT MV-RAD Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale