MacDon FlexDraper FD1 Series Manuale utente

Featuring MacDon FLEX-FLOAT Technology

™

The harvesting specialists.

FD1-Series

FlexDraper®Combine Header

Operator’s Manual

147831 Revision A

2016 Model Year

Original Instruction

IMPORTANT: PAGE 29 HAS

BEEN UPDATED SINCE THIS

MANUAL WAS PUBLISHED.

FD1-Series FlexDraper®Header for Combines

Published: April 2016

Declaration of Conformity

147831 iRevision A

147831 iiRevision A

147831 iii Revision A

147831 ivRevision A

Introduction

This instructional manual contains information on the FD1-Series FlexDraper®and the FM100 Combine Float

Module. It must be used in conjunction with your combine operator's manual.

The FD1-Series FlexDraper®is specially designed to work well in all straight cut conditions, whether cutting on or

above the ground, using a three-piece ﬂexible frame to closely follow ground contours.

Carefully read all the material provided before attempting to use the machine.

Use this manual as your ﬁrst source of information about the machine. If you follow the instructions provided, your

header will work well for many years. If you require more detailed service information, a technical manual is available

from your MacDon Dealer.

The Table of Contents and Index will guide you to speciﬁc areas of this manual. Study the Table of Contents to

familiarize yourself with how the information is organized.

Keep this manual handy for frequent reference and to pass

on to new Operators or Owners. A manual storage case is

located inside the header left endshield.

Call your MacDon Dealer if you need assistance,

information, or additional copies of this manual.

Figure 1: Manual Storage Location

147831 vRevision A

Model and Serial Number

Record the model number, serial number, and model year of the header, combine ﬂoat module, and

transport/stabilizer wheel option (if installed) in the spaces provided.

NOTE:

Right-hand (RH) and left-hand (LH) designations are determined from the operator’s position, facing forward.

FlexDraper®Header

Header Model:

Serial Number:

Year:

The serial number plate (A) is located beside the knife

drive motor on the left-hand endsheet.

Figure 2: Header

Combine Float Module

Float Module

Model:

Serial Number:

Year:

The serial number plate (A) is located on the underside

of the reservoir at the right end.

Figure 3: Float Module

Slow Speed Transport/Stabilizer Wheel Option

Serial Number:

Year:

The serial number plate (A) is located on the right-hand

axle assembly.

Figure 4: Transport/Stabilizer Option

147831 vii Revision A

Altri manuali per FlexDraper FD1 Series

Indice

Altri manuali MacDon Attrezzature agricole

Manuali Attrezzature agricole popolari di altre marche

GSi

GSi PNEG-2314 Manuale utente

Checchi & Magli

Checchi & Magli TEXDRIVE Manuale utente

Amazone

Amazone Cenius 4003-2TX Manuale utente

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuale utente

Cima

Cima BLITZ Istruzioni operative e di manutenzione

Amazone

Amazone CombiDisc 3000 Istruzioni per l'installazione

HE-VA

HE-VA Disc-Roller XL Contour Manuale utente

AGT

AGT AGT-SSFM Manuale utente

Milestone

Milestone 72-84 Manuale utente

KUHN

KUHN Hector 3000 Manuale utente

Krone

Krone X-Disc 6200 Manuale utente

Eliet

Eliet DZC450 Manuale utente

Taarup

Taarup BIO+ B4000 Manuale utente

Garland

Garland SHAKER 310 DPG Manuale utente

stable comfort

stable comfort StableWall System Manuale utente

Raven

Raven AccuBoom Manuale utente

International

International 710 Manuale utente

Ashland

Ashland HDW-3217-14 Manuale utente