MacDon R113 Manuale utente

Altri manuali per R113

11

Questo manuale è adatto per i seguenti modelli

1

Altri manuali MacDon Attrezzature agricole

Manuali Attrezzature agricole popolari di altre marche

GSi

GSi PNEG-2314 Manuale utente

Checchi & Magli

Checchi & Magli TEXDRIVE Manuale utente

Amazone

Amazone Cenius 4003-2TX Manuale utente

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuale utente

Cima

Cima BLITZ Istruzioni operative e di manutenzione

Amazone

Amazone CombiDisc 3000 Istruzioni per l'installazione

HE-VA

HE-VA Disc-Roller XL Contour Manuale utente

AGT

AGT AGT-SSFM Manuale utente

Milestone

Milestone 72-84 Manuale utente

KUHN

KUHN Hector 3000 Manuale utente

Krone

Krone X-Disc 6200 Manuale utente

Eliet

Eliet DZC450 Manuale utente

Taarup

Taarup BIO+ B4000 Manuale utente

Garland

Garland SHAKER 310 DPG Manuale utente

stable comfort

stable comfort StableWall System Manuale utente

Raven

Raven AccuBoom Manuale utente

International

International 710 Manuale utente

Ashland

Ashland HDW-3217-14 Manuale utente

R113/R116 Rotary Disc Pull-Type Mower Conditioner Quick Card MD #147624

Supplement to R113/R116 Operator’s Manual.

R113/R116 Quick Card

Subject to change without notice.

Use this card as a guide only. Refer to your Operator’s Manual

for detailed settings and adjustment procedures.

Short Stubble/Smooth Ground: Upper position (A).

High Stubble/Rocks/Cane: Lower position (B).

Skid Shoes

Header Angle

Smooth/Level/Firm Ground: Steep angle (B).

Rocks/Ridges/Loose Ground: Shallow angle (A).

Increase Conditioning:

Move lever forward (A).

Decrease Conditioning:

Move lever aft (B).

Increase Conditioning:

Loosen (A), turn (B) CW, tighten (A).

Decrease Conditioning:

Loosen (A), turn (B) CCW, tighten (A).

Roll Gap

Light Crop/Dry Grass:

900 rpm – factory set.

Sensitive Crop (new/thin alfalfa, thin grass):

600 rpm – swap pulleys (A) and (B).

Light Crops—Less Tension:

Loosen (A), turn (B) to increase (C), tighten (A).

Heavy/Tough Crops—More Tension:

Loosen (A), turn (B) to decrease (C), tighten (A).

Roll Tension Finger Rotor RPM

Finger Clearance

C on d iti o ni n g

C u t ti n g H e i g h t

R113/R116 Rotary Disc Pull-Type Mower Conditioner Quick Card MD #147624

Supplement to R113/R116 Operator’s Manual

R113/R116 Quick Card Subject to change without notice.

Use this card as a guide only. Refer to your Operator’s Manual

for detailed settings and adjustment procedures.

(A) Wide: Deflectors outboard.

(B) Narrow: Deflectors inboard.

Roll Cond: Move bar (C).

Finger Cond: Move handle (D).

Wide (A): Lower baffle (C)

Narrow (B): Raise Baffle (C)

Finger Baffle Roll Baffle

Smooth/Level/Firm Ground:

10 mph (16 kph) and higher until cutting and conditioning quality

are compromised.

Rocks/Ridges/Loose Ground:

Slow to minimize bouncing, uneven stubble and damage to cutter

bar.

G r ou n d S p e e d

(A) acres/hr, (B) hectares/hr, (C) kph, (D) mph, (E) 16 ft., (F) 13 ft.

Refer to Operator’s Manual.

Switch at (A). Light (C) On.

Tr a ns p or t

Field Mode

Switch at (A). Light (C) Off.

Transport Mode

1000 PTO rpm

800 PTO rpm

Light/Thin Crop Heavy/Tough Crop

D i s c S p e e d

1. Loosen (C).

2. Turn (D) CW.

3. Tighten (C).

1. Loosen (C).

2. Turn (D) CCW.

3. Tighten (C).

Rocks/Ridges/

Loose Ground (100 lb)

Smooth/Level/

Firm Ground (125–150 lb)

F lo at

Tips:

• Sharp blades reduce horse power requirements.

• Install cutterbar filler plates in tall, stemmy crops.

• Remove rear filler plate to reduce dirt accumulation in cutterbar.

Side Deflectors

Wi n dr o w