Macsense MIH-108 Manuale utente
R
acsense
User’s Manual
PalmRouter Elite
(MIH-108)
Table of Contents
ABOUT THIS MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Package Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Items Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
EASY INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Windows 95 TCP/IP Configuration . . . . . . . . . . . . . . . . . . . . .10
Mac OS TCP/IP Configuration . . . . . . . . . . . . . . . . . . . . . . . .13
Setting Up the PalmRouter Elite through Web Browser . . . . . .15
ADVANCED CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . .19
Intranet Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Modem1 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Modem2 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Device Admin Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Status Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
ii
APPENDIX A SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . .33
APPENDIX B HARDWARE DESCRIPTION . . . . . . . . . . . . .35
APPENDIX C GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
iii
ABOUT THIS MANUAL
The User's Manual will tell you how to connect a LAN to the Internet
using the MIH-108 PalmRouter Elite Internet Sharing Hub. This manual
assumes you are familiar with personal computers and network environments.
It is organized as follows:
Chapter Content
Introduction Describes the features and main applica-
tions of the PalmRouter Elite.
Before You Start Describes the information and environment
needed to set up the PalmRouter Elite.
Easy Installation Describes how to install the PalmRouter
Elite for ordinary applications.
Advanced Configuration Describes the detail configuration options
for the PalmRouter Elite.
Troubleshooting Lists problems and solutions one might
encounter when using the PalmRouter Elite
Appendix A Hardware Description
Appendix B Specifications
Appendix C Glossary
About This Manual
1
INTRODUCTION
Thank you for purchasing the Internet Sharing Hub, MIH-108
PalmRouter Elite. The PalmRouter Elite functions as an easy-to-use commu-
nication device allowing you to connect a local area network (LAN) to the
Internet. The PalmRouter Elite provides a convenient and economical solu-
tion for small office or home office (SOHO) users who want access to the
Internet at a lower cost.
Sharing Internet Access
The PalmRouter Elite provides high-speed Internet access to multiple
users by sharing the bandwidth of up to two dial-up accounts. It comes
equipped with two serial ports that can function as dial-on-demand dial-out
ports. The first serial port dials out when a request for the Internet is made.
The secondary serial port dials out when the bandwidth of the first serial port
has reached its limit. When users log off and the network traffic jam has been
relieved, the secondary serial port disconnects automatically. If no request is
made for Internet resources for a period of time, the PalmRouter Elite discon-
nects the first serial port automatically.
Modems Supported
The PalmRouter Elite supports 28.8/33.6/56K modems, ISDN TAs and
leased-line connections. Up to two modems can be connected simultaneously
to increase total bandwidth.
Authentication Protocol Supported
The PalmRouter Elite supports PAP/CHAP authentication protocols and
login scripts for PPP dial-up connections.
Built-in DHCP Server
The PalmRouter Elite allows for automatic TCP/IP configuration on com-
puters over the LAN. The built-in DHCP server dramatically reduces the con-
figuration and maintenance effort.
Introduction
2
8-Port Ethernet Hub Inside
In addition to Internet sharing capability, the PalmRouter Elite also func-
tions as an Ethernet hub. It has eight 10BASE-T RJ-45 ports, allowing users
to connect with a small LAN.
Easy Configuration
The PalmRouter Elite can be configured through a Web browser, and fea-
tures Web-based management for a simple, intuitive set up.
Virtual Server
Internet users can set up and access servers (such as WWW, and FTP)
through the Virtual Server mapping function of the PalmRouter Elite.
Security
The PalmRouter Elite provides firewall-like security to prevent unautho-
rized Internet users from accessing internal files. It can also filter out Internet
requests from certain nodes on a local network - a feature that is ideal for
administrative purposes.
Introduction
3
BEFORE YOU START
This chapter provides information about package contents and require-
ments for installing the PalmRouter Elite.
Package Overview
Please check to make sure you have received the items listed below
before setting up your PalmRouter Elite.
¥ PalmRouter Elite 1
¥ Power Adapter 1
¥ Mini Din-8 to DB-9 Adapter 1
¥ User's Manual 1
Items Required:
¥ At least one Internet-access account from an ISP
¥ An analog telephone line or ISDN line
¥ A modem or ISDN terminal adapter
¥ UTP cable with RJ-45 connector
System Requirements
¥ Any personal computer equipped with a 10BASE-T Ethernet connection
interface that can support TCP/IP protocol on Ethernet.
¥ Windows 95/98, Windows NT 4.0 or later versions-Optional for using
PC version of firmware upgrade program only.
¥ Mac OS 7.5 or later versions-Optional for using Mac version of firmware
upgrade program only.
¥ Netscape Communicator 4.0 or above, Microsoft Internet Explorer 4.0 or
later versions are necessary for Web configuration.
Before You Start
4
EASY INSTALLATION
Hardware Installation
Modem Connection
Connect one end of an RS-232 serial cable to the modem/ISDN TA.
Connect the other end to either of the two DB-9 serial ports found on the back
of the PalmRouter Elite.
If you are connecting a modem designed for Macintosh use to the
PalmRouter Elite's serial ports, the Mini-Din 8 to RS-232 DB-9 adapter (con-
tained in the package with the PalmRouter Elite) should be used.
Note:If you want to reset the modem and you are using the Mini Din-8 to
RS-232 Adapter (to connect a modem designed for Macs), please
wait for 10 seconds after turning the power off in order to let the
PalmRouter Elite detect the disconnection.
Easy Installation
5
The PalmRouter Elite can support up to two modem connections simulta-
neously. The two serial ports labeled "SERIAL 1" and "SERIAL 2" can func-
tion as dial-out connections. To do so:
1) Connect the phone line to the modem/ISDN TA.
2) Connect the power adapter to the modem/ISDN TA and keep the
power off until all hardware installation procedures are complete.
Connecting the PalmRouter Elite to Your Network Environment
Use standard twisted-pair Ethernet cables with RJ-45 connectors to con-
nect computers or other Ethernet devices to the RJ-45 ports of the PalmRouter
Elite.
You can connect computers to any one of eight RJ-45 ports on the rear
panel of the PalmRouter Elite. But if you intend to connect the PalmRouter
Elite to another hub, we advise that you keep port No.8 free because this is
the only port that can be used to uplink the PalmRouter Elite to another hub.
Uplinking can be done by setting the DIP Switch beside the port from
"straight" to "crossover" mode.
Plug the power adapter of the PalmRouter Elite into an AC power outlet,
then plug the power adapter output cable into the power connector on the rear
panel of the unit. The Power LED on the front panel should be lit immediate-
ly.
6
Software Configuration
TCP/IP Network Configuration of Clients
After installing the PalmRouter Elite hardware, the PalmRouter Elite
needs to be configured through a Web browser (such as Netscape Navigator,
Netscape Communicator, or Microsoft Internet Explorer). The computer that
will manage the PalmRouter Elite must have its TCP/IP settings configured
correctly. All other computers receiving Internet access through the
PalmRouter Elite must also have their TCP/IP settings configured correctly.
The PalmRouter Elite's default IP address is "192.168.1.1". In order to
connect the PalmRouter Elite, the computer designated for managing clients
must be on the same subnet as the PalmRouter Elite. Consequently, IP
addresses ranging from "192.168.1.2" to "192.168.1.252" are legal for clients
to use. IP addresses from "192.168.1.253" to "192.168.1.255" are reserved for
system use and network broadcasts.
The PalmRouter Elite can support both Windows and Macintosh
platforms. Please follow the proceeding steps to configure the Windows and
Macintosh TCP/IP settings.
Easy Installation
7
Indice
Altri manuali Macsense Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza