Macsense funpad pro Manuale utente
USB FunPad pro
Game Controller
User’s Manual
Copyright
Copyright © 2000 by Macsense. All rights reserved. No part of
this documentation may be reproduced in any form or by any
means or used to make any directive work (such as translation or
transformation) without permission from Macsense Connectivity,
Inc. Macsense Connectivity, Inc. reserves the right to revise this
documentation and to make changes in the content without oblig-
ation to provide notification of such revision or change.
FCC Warning
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to 47 CFR, Part 2 and
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio commu-
nications. However, there is no promise that interference will not
happen in a particular installation.
CE Declaration of Conformance
This is to certify that this device is shielded against the gener-
ation of radio interference in accordance with the application of
Council Directive 89/339/EEC on the approximation of the laws of
the Member States relating to electromagnetic compatibility.
Conformity is declared by the application of Class B.
Trademarks
All companies, brands, and product names are trademarks or
registered trademarks of their respective companies.
Specifications are subject to change without prior notice.
i
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
General Informations for FunPad Pro . . . . . . . . . .1
Package Contents . . . . . . . . . . . . . . . . . . . . . . . .1
System Requirements . . . . . . . . . . . . . . . . . . . . .1
Hardware Overview . . . . . . . . . . . . . . . . . . . . . . .1
Operation Reference . . . . . . . . . . . . . . . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Hardware Installation . . . . . . . . . . . . . . . . . . . . . .3
Software Installation . . . . . . . . . . . . . . . . . . . . . . .4
Programming the FunPad Pro . . . . . . . . . . . . . . .5
Choosing a Game Set . . . . . . . . . . . . . . . . . . . . .6
Editing a Game Set . . . . . . . . . . . . . . . . . . . . . .7
Creating an All-New Game Set . . . . . . . . . . . . . . .9
Using Game Sprockets
to Configure the FunPad Pro . . . . . . . . . . . . . . . .9
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .10
ii
Introduction
Thank you for purchasing the Macsense FunPad pro. The
FunPad pro computer game controller is equipped with a USB
connector, making it compatible with the new Apple iMac, Blue
G3, or any Macintosh with USB interface. This advanced game
controller combines high performance functionality with a stylish
ergonomic design, making it one of the best USB game con-
trollers available for racing, flying, or combat games.
In addition to the regular features of a standard game pad, the
FunPad pro has additional configuration functionality allowing you
to program the device to fit your individual preferences for the
game you like to play.
Please read this manual for information about installing, pro-
gramming, and configuring the controller’s buttons to fit your pref-
erences.
At Macsense we are continually searching for ways to improve
our products and our company. If you have any suggestions, or if
you have questions about the FunPad pro, please e-mail our tech-
The information in this manual is organized as follows:
Chapter Content
Introduction Describes the package contents, fea-
tures, and main applications of the
FunPad pro
Installation Shows how to install the FunPad pro
for ordinary applications
Programming the FunPad pro Presents configuration options
Specifications Provides technical details
iii
General Informations for FunPad pro
Package Contents
After opening the box containing the FunPad pro, check to
make sure you have received these items.
• A FunPad pro game controller
• A CD containing software & on line manual
System Requirements
• Macintosh computer with an available USB port
• Mac OS 8.1 or higher
Hardware Overview
Please take a moment to review the diagram below to familiar-
ize yourself with the buttons on your FunPad pro.
Figure 1 - Button/switch Operation
1
Operation Reference
In addition to having the basic functions of a standard game
pad (X, Y axes, and function buttons) we’ve added several extra
options to the FunPad pro. We think that once you become famil-
iar with the FunPad pro’s Throttle Buttons, you’ll agree with us
that the FunPad pro blows the competition away! Following is a
list of action inputs on the FunPad pro along with a brief descrip-
tion of how each one is applied.
•Function Buttons
Buttons 1-8 are game dependent. Please consult the
manual of the individual game to get the best game per-
formance. Use these to kick, punch, etc.
•Direction Pad
The direction pad offers 360-degree directional move-
ment. Its auto-centering functionality returns the cursor to
a neutral position when released.
•Throttle and Rudder Stick
For flight simulator games, these buttons are like the gas
and brake pedals on a car. Push the Throttle Up Button,
and it’s up, up, and away! Or if you don’t particularly feel
the need for speed, simply push the Throttle Down
Button and you’ll slow to a crawl. These buttons are non-
autocentering, so the values remain in whatever position
you leave them in.
2
Installation
Hardware Installation
The FunPad pro computer game controller uses USB technol-
ogy to interface with your computer. USB is a “hot-swappable”
technology, meaning you can connect peripherals to the computer
while the power is on. However, to protect the sensitive electrical
components inside your computer (and inside the FunPad pro),
we recommend turning your computer’s power off before
connecting the FunPad pro.After turning off your computer,
please follow these steps:
1. Plug the FunPad pro’s USB connector firmly into an avail-
able USB port of your computer.
(NOTE: On most Apple computers, the USB ports can be found
on the keyboard or in the back panel of the computer. If
all ports are occupied, you may need to plug the FunPad
pro’s USB connector— and any other USB devices cur -
rently connected to your computer—into a USB hub. Then
connect this hub to one of the newly vacated computer
ports).
2. After plugging the FunPad pro’s connector into your com-
puter’s USB ports (or into a hub), turn your computer’s
power on and proceed to the next section in this manual-
“Software Installation.”
3
Software Installation
An installation CD comes bundled with the FunPad pro. This
CD contains the FunPad pro’s driver (a driver is a software pro-
gram that gives your computer special instructions that make the
device work). After you have connected the FunPad pro’s USB
cable to your computer, please locate this CD and follow the
directions below.
1. Insert the FunPad pro CD into your computer’s CD-ROM
drive and wait several moments for your computer to read
the disc. A FunPad pro Installer screen appears with a
FunPad pro Installation Icon like the one below.
2. Double-click this icon. The following screen appears.
Figure 2 - Installer Screen
3. Follow the onscreen instructions.
4. After the installation is complete, restart your computer.
4
Programming the FunPad pro
With the FunPad pro cable attached to your computer and the
software installed you are almost ready to start playing games.
Before you do, you must program the buttons and switches on the
FunPad pro because these buttons are initially set to default val-
ues that may not be optimal for the game you want to play.
You can program the function buttons by selecting or choosing
an appropriate game set. (A game set is a group of prearranged
actions assigned to the buttons and switches of your FunPad pro.
For example, a game set for a boxing game could have function
button 2 correspond to “punch,” while a different game set
designed for a flight simulation game could have that same button
correspond to a “shoot” action). You can configure your FunPad
pro’s buttons in one of these four ways:
• Choose an existing game set that have been pre-pro-
grammed.
• Edit the existing game set and save as a new game set.
• Create an all-new game set.
• Use “Game Sprockets.”
(NOTE: Game Sprockets is an interface application that lets a
game-oriented input device—such as the FunPad pro—
communicate with your computer. Game Sprockets pro -
vides a user-friendly method of configuring your game
pad, and is supported by many games. Consult the man -
ual of the game you will be playing to find out if this
game supports Game Sprockets).
5
Choosing a Game Set
Choosing a game set is a quick and easy method of program-
ming your FunPad pro’s buttons so that these buttons best corre-
spond to the actions and movements required for the game you
want to play. To choose a game set from the list of those that
have been pre-programmed, follow the instructions below:
1. Select Macsense GameDevices in the control panel. The
FunPad pro setup menu (shown below) appears. Click the
Current Setting box and a pop-up menu appears.
2. Hold the mouse button down and drag the cursor to the
game set that best matches the game you will be playing.
When you have chosen a proper game set, release the
mouse button.
3. Exit the program and begin playing.
(NOTE: If you would like to make a slight modification to one of
the pre-programmed game sets, read the next section
“Editing a Game Set.”)
Figure 3 - Choosing a Game Set
6
Indice
Altri manuali Macsense Controller per videogiochi
