Magnum MCC-35 Scheda tecnica
Product instruction manual
Magnum MCC-35
The Magnum has been designed to be user friendly,
however we strongly recommend you take a few minutes
to read through this manual to ensure correct operation.
Keep this manual safe for future reference.
MCC-35 2
INDEX
Chapter 1INTRODUCTION .............................................................................. 1
1.1 Preface ............................................................................................... 1
1.2 Specification ....................................................................................... 2
Chapter 2 SAFETY .......................................................................................... 3
2.1 Environment ........................................................................................ 4
2.2 Do’s and Don’ts .................................................................................. 4
2.3 Cautions .............................................................................................. 5
Chapter 3 MAIN PARTS & ASSIES ................................................................. 6
Chapter 4 INSTALLATION ............................................................................... 8
4.1 Open Package and Check .................................................................. 8
4.2 Parts Installation ................................................................................. 9
4.2.1 Outfeed Part ............................................................................. 9
4.2.2 Extension Table Installation ...................................................... 9
4.2.3 Power Socket and Switch ....................................................... 10
Chapter 5 OPERATION ................................................................................. 11
5.1 Key Panel Introduction ...................................................................... 11
5.2 Quick Start ........................................................................................ 12
5.3 Screen Introduction ........................................................................... 13
5.3.1 Welcome Screen .................................................................... 13
5.3.2 Ready Screen ......................................................................... 13
5.3.2.1 Main Ready Screen ...................................................... 13
5.3.2.2 Cut Data Screen ........................................................... 13
5.3.2.3 Crease Data Screen ..................................................... 14
5.3.2.4 Total Sheets Screen ..................................................... 14
5.3.2.5 Total Crease & Cut QTY Screen ................................... 14
5.3.2.6 Software Version & Serial Number ............................... 14
5.3.3 Mode Introduction ................................................................... 15
5.3.3.1 Recall Factory Template ............................................... 15
5.3.3.2 Set Paper Length .......................................................... 16
5.3.3.3 Register Mark Function ................................................ 16
5.3.3.4 Smart Input Screen ....................................................... 16
5.3.3.5 Set Cut Data ................................................................. 16
5.3.3.6 Input Crease Data Screen ............................................ 17
5.3.3.7 Set Shrink/Stretch Ratio ............................................... 17
5.3.3.8 Horizontal Shift Screen ................................................. 17
5.3.3.9 Card Length Offset Screen ........................................... 17
5.3.3.10 Gutter Offset Screen ................................................... 18
5.3.3.11 Recall Job Screen ....................................................... 18
5.3.3.12 Save Job Screen ........................................................ 18
5.3.3.13 Speed Screen ............................................................. 19
5.3.3.14 Crease + Slit Screen ................................................... 19
5.3.4 Smart Input Mode ................................................................... 20
MCC-35 3
5.3.4.1 Introduction of the sheet data: ...................................... 20
5.3.4.2 Create A Job With Smart Input: .................................... 21
5.3.4.2.1 Input Lead Trim .................................................. 21
5.3.4.2.2 Input Card Length & Gutter ................................ 21
5.3.4.2.3 Input Crease Data .............................................. 21
5.3.4.2.4 Tail Trim Error ..................................................... 22
5.3.5 Register Mark Setting ............................................................. 22
5.3.5.1 How to Create a Register Mark？ ................................. 22
5.3.5.2 How to use a Register Mark？ ...................................... 23
5.4 Hardware Setting .............................................................................. 24
5.4.1 Side Guide Setting .................................................................. 24
5.4.2 Skew Adjustment .................................................................... 25
5.4.3 Slitters Setting ........................................................................ 26
5.4.3.1 Remove the Gauge ...................................................... 26
5.4.3.2 Install the Gauge .......................................................... 27
5.5 Crease Only ...................................................................................... 28
5.5.1 Setting Side Guides ................................................................ 28
5.5.2 Position Slitters and Deflecting Rollers ................................... 28
5.5.3 Set Outfeed Tray .................................................................... 29
5.5.4 Set Crease Data ..................................................................... 29
5.6 Only Trim Sheet Sides ...................................................................... 29
5.6.1 Place Slitters ........................................................................... 29
5.6.2 Set Cut Data ........................................................................... 29
5.7 Slide-in Tools .................................................................................... 29
5.7.1 Exchange Slide-in Tools ......................................................... 29
5.7.2 Change Perforate Crush Pad (Purchase on Demand) ............ 30
5.7.3 Crease Depth Adjustment ....................................................... 30
Chapter 6 CUTTING FORMAT ...................................................................... 32
6.1 Metric Version ................................................................................... 32
6.1.1 A3-90*48 ................................................................................. 32
6.1.2 A3-90*50 ................................................................................. 33
6.1.3 A3-90*54 ................................................................................. 34
6.1.4 SRA3-90*48 ............................................................................ 35
6.1.5 SRA3-90*50 ............................................................................ 36
6.1.6 SRA3-90*54 ............................................................................ 37
6.1.7 SRA3-85*210 .......................................................................... 38
6.1.8 SRA3-85*210-C1 .................................................................... 39
6.1.9 SRA3-90*210 .......................................................................... 40
6.1.10 SRA3-90*210-C1 .................................................................. 41
6.1.11 SRA3-A3-C1 ......................................................................... 42
6.1.12 SRA3-A3-C2 ......................................................................... 43
6.2 Imperial Version ................................................................................ 44
6.2.1 DIG-3.5*2 ................................................................................ 44
6.2.2 DIG-3.5*5 ................................................................................ 45
MCC-35 4
6.2.3 DIG-3.5*8 ................................................................................ 46
6.2.4 DIG-5*8 ................................................................................... 47
Chapter 7 TROUBLE SHOOTING ................................................................. 48
7.1 Show warning C-1 ............................................................................ 48
7.2 Show warning C-2 ............................................................................ 49
7.3 Show warning C-3 ............................................................................ 50
7.4 Show Error E-1 ................................................................................. 51
7.5 Show Error E-2 ................................................................................. 51
7.6 Image Compensation ........................................................................ 52
Chapter 8 Maintenance .................................................................................. 53
8.1 User Maintenance ............................................................................. 53
8.1.1 Clean Rollers .......................................................................... 53
8.1.2 Clean Sensors ........................................................................ 53
8.2 Technician Maintenance ................................................................... 53
MCC-35 1
Chapter 1INTRODUCTION
1.1 Preface
This manual only applies to MCC-35.
Before using the machine, please read the instruction manual carefully first.
Please keep the manual properly so that consulting it at any time in the future.
Any question while operating please contact our technicians.
MCC-35 2
1.2 Specification
Item
Parameter
Package Dimensions
Length*Width*Height
(mm)
1330x570x980
Machine Dimensions
Length*Width*Height
(mm)
670x630x1150
Net Weight
100kg
Package Weight
116kg
Power Input
AC220V,50/60Hz, 150W
Output Size
Max（W*L）(mm)
318×640
Min（W*l）(mm)
55×48
Infeed Size
Max（W*L）(mm)
330×650
Min（W*l）(mm)
210×210
Thickness
150g~350g/0.15~0.35mm
Paper Waviness
±3mm
Cutter
Max Qty for Cutter per
Sheet
32
Accuracy for Cutting
±0.2~0.4mm
First Cut
3.2~15mm
Last Cut
5~15mm
Gutter Cut
3~15mm
Slit
Slitters
4
Side Trim
3.2~38mm
Gutter Slit
8mm
Accuracy for Slitting
±0.3mm
Crease
Max Qty for Crease per
Sheet
32
Crease Depth Adjustment
Infinite Manual Adjustment
Crease Direction
Both
Crease Die Spec.
1.0mm
Perforator
Perforate Die Spec.
12TPI
Speed
A4 trimming 4 sides,
crease in middle
20Sheets/min
Feeding
Middle Infeed
Hand Feed
User Template
Storage
30
Register Mark
Y Direction only
Image
Compensation
Y Direction Compensation
Only
Note: The machine is keep upgrading, specification and information in this
manual are updated as per the change without notice.
MCC-35 3
Chapter 2 SAFETY
Please shut down the machine before the maintenance.
In order avoid any mistake when re-connecting wires back, we advise you to
mark each connector before replace of any electrical component.
Mind that every connection should be firm, first hold both sides of the
connector, and then, in the middle, not firm connection is possible to damage
the electrical components.
Power supply
AC input，Voltage/Frequency is：
AC220V/50-60Hz.
！If the voltage or frequency are not in the range, the
machine may not be used normally or even may
cause unrecoverable damage
Power cord，Over 10A current is endurable
！1. Do not remove the cord when the machine is running,
illegal operation may cause component damage or machinery
jam
2. Remove the cord when you are installing components.
Ground symbol. If you see this symbol in any place,
please do not touch it anyhow, or uninstall it.
!If the ground is not well connected, it may cause human
body injury.
MCC-35 4
2.1 Environment
Temperature：10°C to 35°C
Humidity: 30% to 70%
Altitude: Below elevation 1000m
There is no corrosiveness gas, flammable gas, oil mist and so on in room
2.2 Do’s and Don’ts
Do-Read this manual and fully understand before the operation.
Do-Check the plug and machine voltage and frequency to your main
supply, and that the socket has a correct working earth lead for this single
insulated machine
Douse at least a 10 amp power source at 220 V. (20Amp/100V).
Do make sure all safety covers are in place. The top covers have an
interlock switch which will disable the unit if removed
Do open or close the cover slowly
Do contact the local maintenance center before you are about to move
the machine.
Do disconnect the power before clean the inner side.
Do unplug the cord if you won’t use the machine for a long while,
Do be careful of the blade edge
Don’t install the machine on an unstable ground.
Don’t operating with wet hand, especially plug or unplug the cord.
Don’t wear long hair, loose fitting clothes or put your fingers into the
creasing unit nip, while the operation..
Don’t place any receptacles with any liquid on any surface of machine.
MCC-35 5
Don’t-put other pieces, especially tiny pieces on loading table.
Don’t-alter or uninstall the machine, unless by Vivid Laminating
Technologies Ltd authorized engineer.
Don’t touch any running parts while running
Don’t shut down the machine while running.
Don’t put heavy matter on machine or shock it.
Don’t put the side guide under the feeding system.
2.3 Cautions
Be careful of any metal or flammable thing in internal machine, or it may cause
fire or electronic shock. If it happens, first shut down the power, disconnect the
cord, and then contact the technician.
If machine becomes heat, smoke, or smelly, shut down at once, disconnecting
the cord, and contact the maintenance staff.
MCC-35 6
Chapter 3 MAIN PARTS & ASSIES
No.
Description
Remark
1
Waste Box
Collect Waste Paper
2
Outfeed Tray
Collecting finished Bigger Cards or Sheets
3
Card Collector
Collect finished business card
4
Top Cover
Protection
5
Key Pad
Operate the machine
6
Loading Table
Loading Paper
7
Machine Body
Machine main working part
8
Side Cover
Interchange the crease die or perforate die
9
Tools Storage
Place the idle crease die or perforate die
10
Stand
Place the waste box.
5
10
9
8
1
4
3
2
6
7
Indice
Altri manuali Magnum Macchina rilegatrice
Magnum
Magnum MC-35M Scheda tecnica
Magnum
Magnum iBind A20 Manuale utente
Magnum
Magnum MCR-35 Scheda tecnica
Magnum
Magnum MEC46 Scheda tecnica
Magnum
Magnum MCPF-35 Scheda tecnica
Magnum
Magnum MC-35A Scheda tecnica
Magnum
Magnum MCC-35ASP Scheda tecnica
Magnum
Magnum MCR-46 Manuale operativo
Magnum
Magnum MEC21 Scheda tecnica
