MAKEiD T1 Series Manuale utente
T1 Series Label Printer
User Manual
Copyright Statement
Edition 1.0 issued in April 2018
All rights reserved 2018MAKEiD Printer
This manual includes the professional information of
Chongqing Jingranyouxu Science and Technology Co.,
Ltd., which are only for commercial customers’ reading
and reference. The contents herein shall not be used,
copied or spreaded, publicized by any means for any
reason or purpose without the written permission of
Chongqing Jingranyouxu Science and Technology Co.,
Ltd., otherwise, we will investigate and affix the legal
liability.
Chongqing Jingranyouxu Science and Technology Co.,
Ltd. reserves the amendment right without further no-
tice.
Trademark
MAKEiD is the registered trademark of Chongqing
Jingranyouxu Science and Technology Co., Ltd.
Microsoft is the registered trademark of Microsoft Cor-
poration.
Windows is the registered trademark of Microsoft Cor-
poration.
Contents
Foreword.................................................... 1
Disclaimer .................................................. 2
Safety Instructions...................................... 3
1.1 Overview .............................................. 8
1.2 Unpacking ............................................ 8
1.3 Packing List.......................................... 8
1.4 Main Parts............................................ 9
1.5 Technical Parameters and Specification
................................................................. 10
................................................................. 12
2.1 Installation of Label Box and Cautions 12
2.1.1 Check the label box and make sure that all
parts are in good status and there is no breakage
or other problems. ............................................ 12
2.1.2 Insert the label box into the printer as
shown in Figure 2-1. Close the printer cover. .. 12
3.1 Printer Operation................................ 13
1. Power on the printer.......................... 13
2. Turn on the printer............................. 13
3. Alarm................................................. 14
4. Print test............................................ 14
10. Turn off the printer............................. 14
3.2 Description of Indicators..................... 14
3.4 Connect a mobile device to operate the
printer....................................................... 14
Chapter IV Maintenance........................... 15
4.1 Preparation before maintenance:........ 15
4.2 Cleaning of the Label Box Reader...... 15
4.3 Maintenance of Print Head................. 16
4.5 Cleaning of Internal Space ................. 16
Chapter V Failure Treatment................. 17
5.1 Failure Indication................................ 17
5.2 Minor Failures..................................... 18
1. Failure of print head .......................... 18
2. Shutdown of printer........................... 18
3. The printing quality is not good......... 18
4. The printer cannot be turned off........ 18
5.3 Failure due to other unknown causes. 19
Annex....................................................... 19
Foreword
Dear users:
Thanks for choosing T1 series portable label printer
designed and manufactured by Chongqing
Jingranyouxu Science and Technology Co., Ltd.
T1 series portable label printer is a light, handy and
convenient thermal wax printer which can realize print-
ing via mobile phone, tablet PC and other devices. It is
with good performance, easy operation, durability and
wide application range.
This manual specifies the installation, operation and
maintenance of printer, cautions for operation, setting
and maintenance and solutions for minor failures.
Please read this manual carefully before operation and
keep it properly for further use.
Disclaimer
This manual expounds the specification and instruc-
tions. However, specification and configuration of the
printers manufactured thereafter may be altered. The
manufacturer and dealers will not be responsible for
any direct or indirect loss arising from the difference
between manual and the printer.
This manual lists problems that may occur, however,
unforeseen situation may occur during use. For any
problem during printer operation, such as failure to
work, defect or unclearness of printed contents, the
manufacturer and dealers are only responsible for fail-
ure debugging (in line with the articles of warranty
card) rather than other direct or indirect loss therefrom,
including but not limited to loss of business interest,
business interruption, business information and other
financial loss.
Safety Instructions
Personal safety is all-important during operation and
maintenance. Warnings and cautions for printer opera-
tion are detailed in this manual. Please read carefully
before operation and maintenance.
Do not try to repair or adjust it by yourself. In case that
the failure cannot be solved in line with this manual,
please turn off the printer! Disconnect the power
supply.
Please contact Customer Service Dept. of Chongqing
Jingranyouxu Science and Technology Co., Ltd. via
400-158-9100 for help.
Marks
To ensure safety during operation, please pay attention
to the following marks.
Warning: this mark indicates that the items shall
be paid special attention to. Financial loss
or personnel injury may occur in case of
improper use.
Note: this mark indicates that the items shall be
paid attention to. Material damage may oc-
cur or the printer may fail to work in case of
improper use.
Cautions for printer operation
•Please take out the label at the exit after
printing, otherwise sluggish printing may oc-
cur.
•Do not disassemble the printer, otherwise
electric shock, personal injury due to rotating
part, part damage and other accidents may
occur.
•In case of abnormalities, such as smoking
and odor, please disconnect the power sup-
ply to avoid burn.
•Do not take out the label box during printing,
otherwise unforeseen circumstances may
occur.
•The printer is hot after printing. Do not touch
it, otherwise scald may occur.
•Do not use inferior label box (the ones not
manufactured by MAKEiD), otherwise the
print head may be damaged and the service
life of printer may be shortened. Damage of
print head due to inferior materials is not in-
cluded in the warranty range.
•Do not touch the print head, otherwise sens-
ing element may be damaged due to static
electricity.
•Please turn off the power if the printer will
not be used for a long time.
•Do not press or strike the printer, otherwise
the part may be damaged or the printer
working may be abnormal.
•In case of soaking or crash of printer or bat-
tery, please do not use the printer and make
it repair at the maintenance center designat-
ed by MAKEiD.
•To ensure the printing effect and avoid dam-
age of print head, please do not use the
printer at the environment with a tempera-
ture below ０℃ and a relative humidity over
80%. Meanwhile, when the temperature dif-
ference between indoor area and outdoor
area is large, do not use the printer immedi-
ately after taking it into indoor area. Please
use it after the printer has no frosting.
•The print head is a precise part. To better
protect the print head and extend the service
life, the suggested workload is as follows:
* The single printing length shall not ex-
ceed two meters
* The printing length per day shall not ex-
ceed twenty meters
•Temperature of the print head may be high
after continuous printing. Please be careful
during operation so as to avoid burn.
•Do not scrape the print head with hard ob-
ject. Damage of print head due to improper
maintenance and use are not included in the
warranty range.
•The print head is a quick-wear part. To avoid
corrosion, please pay attention to the follow-
ing items:
*Do not touch the print head with hands;
*Do not use ribbon and thermo-sensitive
paper with Na, K and CI ions;
*The print head cannot contact any liq-
uid or moist object;
*Only anhydrous alcohol is applicable for
print head cleaning.
Cautions for battery use
Please read this manual and mark on the battery care-
fully before operation. Do not remove the battery op-
tionally.
•Please store the charged battery properly.
Contact between battery electrode and con-
ductor such as key and jewelry may cause
short circuit, hot, even burn and property
loss or personal injury.
•Do not place battery in fire, otherwise elec-
trolyte leakage may occur. In case that the
electrolyte gets into eyes, do not knead with
hands. Clean eyes with water. In case of se-
rious damage, go to a doctor for treatment. If
the electrolyte spills on skin or clothes, clean
it with water immediately.
•Do not place battery in water, internal short
circuit may occur. In this case, the battery
will get hot, smoke, deform, damage, even
explore.
•The battery is with special circuit protection
and device. Do not open it optionally, other-
wise short circuit or electrolyte leakage may
occur.
•Please use the genuine battery. Battery
made by other manufacturers may cause
burn of printer or injury of operator. Damage
arising from non-genuine battery shall not be
included in the warranty range and the man-
ufacturer and dealers shall bear no respon-
sibility therefrom.
•Replace the battery immediately in case of
color change or deformation.
Altri manuali per T1 Series
1
Indice
Altri manuali MAKEiD Etichettatrice
