MAKFRY 1015 PD Manuale utente
USER MANUAL
1015 PD / 1025 PD
PRESSURE FRYER
CONTENTS
1- GENERAL INFORMATION
2- PRODUCT INTRODUCTION
3- TECHNICAL SPECIFICATIONS
4- PRODUCT SCHEME
5- TRANSPORTATION AND STORAGE CONDITIONS
6- UNPACKING THE PACKAGE
7- PRE-INSTALLATION INFORMATION
8- INSTALLATION AND USAGE
8.1- ELECTRICAL CONNECTION OF 1015 PD
8.2- ELECTRICAL CONNECTION OF 1025 PD
8.3- 1015 PD DEVICE PART IMAGES
8.4- 1025 PD DEVICE PART IMAGES
8.5- DESCRIPTIONS OF 1015PD/1025PD DEVICE PART IMAGES
8.6- DEVICE ACCESSORIES
9- DIGITAL CONTROL PANEL INTRODUCTION AND USAGE
-FACTORY SETTINGS OF PROGRAMS
9.1- DIGITAL PANEL SCREEN CONTENT
9.2- DIGITAL PANEL PROGRAMMING
A-TURNING ON THE FRYER, SWITCHING FROM IDLE MODE TO STANDBY MODE
B-TRANSITIONING YOUR FRYER FROM STANDBY MODE TO READY AND COOKING
MODE
C-PROGRAM SETTINGS
D-DIGITAL PANEL PUMP OPERATION
10-INITIAL OPERATION AND PUMP SYSTEM CLEANING
11-FIRST COOKING
12-AUTOMATIC FILTRATION
13-CHANGING THE PAPER FILTER
14-CLEANING AND MAINTENANCE
A-PRESSURE REGULATOR CLEANING
B-SOLENOID VALVE CLEANING
15-1015 SPARE PART LIST
16-1025 SPARE PART LIST
17-TROUBLESHOTS
18-COOKING PROBLEMS AND SOLUTIONS
19-GENERAL WARNINGS
20-1015 PD ELECTRICAL DIAGRAM
21-1025 PD ELECTRICAL DIAGRAM
22-WARRANTY CERTIFICATE AND TERMS
DEAR USER,
AS MAKFRY FAMILY, WE THANK YOU FOR CHOOSING OUR DEVICE AND FOR YOUR TRUST IN OUR
COMPANY. WE IMPORTANTLY REMEMBER YOU TO READ THE INSTRUCTIONS AND INFORMATION IN
THE USER MANUAL CAREFULLY AND HAVE YOUR USERS READ IT IN ORDER TO GET THE PRODUCT
SUITABLE FOR YOUR EXPECTATIONS AND TO USE IT FOR A LONG-TERM.
THE INFORMATION REGARDING THE INSTALLATION, USAGE AND MAINTENANCE OF THE PRODUCT
YOU HAVE PURCHASED IS INCLUDED IN THE USER'S MANUAL.
PLEASE READ THE USER MANUAL CAREFULLY BEFORE INSTALLING YOUR DEVICE. THE CONNECTION
NETWORK MUST BE PREPARED BY AUTHORIZED PERSONNEL IN ACCORDANCE WITH THE LEGAL
REGULATIONS. IF THE MAINS VOLTAGE TO THE ELECTRICAL CONNECTION OF YOUR DEVICE IS NOT IN
SUITABLE CONDITIONS, THE VOLTAGE OVER THE DEVICE'S CAPACITY WILL CAUSE FAILURE AND
YOUR DEVICE WILL BE OUT OF THE SCOPE OF WARRANTY.
1- GENERAL INFORMATION
THIS USER'S MANUAL CONTAINS INFORMATION ABOUT MAKFRY 1015 PD / 1025 PD INSTRUCTIONS
FOR USE, REQUIREMENTS AND COVERAGE OF WARRANTY.
CAREFULLY READ ALL INSTRUCTIONS AND WARNINGS IN THE USER'S MANUAL. THIS USER'S
MANUAL CONTAINS IMPORTANT INFORMATION ABOUT THE SAFE INSTALLATION, USE AND
MAINTENANCE OF YOUR PRODUCT.
THE MANUFACTURER CANNOT BE RESPONSIBLE FOR DAMAGES TO HUMAN, ENVIRONMENT OR
OTHER MATERIALS ARISING FROM PRINTING OR TRANSLATION OF THE USER'S MANUAL.
INCIDENTAL DAMAGE TO YOUR PRODUCT, NEGLIGENCE, DAMAGE DUE TO FAILURE TO FOLLOW
INSTRUCTIONS AND REGULATIONS OR WRONG CONNECTIONS AND UNAUTHORIZED INTERFERENCE
TO THE PRODUCT SHALL EXCEED THE PRODUCT WARRANTY PROCESS.
KEEP THIS USER MANUAL IN AN EASY ACCESS PLACE FOR USE IF NEEDED.
2- PRODUCT INTRODUCTION
MAKFRY 1015 PD / 1025 PD PRESSURE FRYERS ARE DESIGNED TO BE USED IN INDUSTRIAL KITCHENS
AND IT IS RECOMMENDED FOR USE BY PROFESSIONAL USERS.
3- TECHNICAL SPECIFICATIONS
PRODUCT:
1015 PD
DIMENSIONS
WIDTH:428 MM - DEPTH:740 MM –HEIGHT: 1100 MM
ENERGY
220-240 / 380-400 V 6 kW 50-60HZ
WEIGHT
90 KG (GROSS)
TANK CAPACITY
33 LITER
OIL CAPACITY
15 LITER
COOKING CAPACITY
4 KG IN 8 MINUTES / 30 KG IN HOUR
PRODUCT:
1025 PD
DIMENSIONS
WIDTH :470 MM - DEPTH :980 MM –HEIGHT :1200 MM
ENERGY
380-400 V 13,5 kW 50-60HZ
WEIGHT
135 KG (GROSS)
TANK CAPACITY
45 LITER
OIL CAPACITY
25 LITER
COOKING CAPACITY
5,5 KG IN 8 MINUTES / 40 KG IN HOUR
4- TECHNICAL SCHEME
*THE DETAILED DESCRIPTION OF 1015 PD HAS BEEN MADE IN 8.1
* THE DETAILED DESCRIPTION OF 1025 PD HAS BEEN MADE IN 8.2
5- TRANSPORTATION AND STORAGE CONDITIONS
THE PRODUCT IS SPECIALLY PACKED AND SHIPPED IN A FORM. CARRY THE PRODUCT WITH THE
FORKLIFT FEET INSTALLED UNDER THE PALLET. IF THE TRANSPORT DISTANCE IS FAR, IT MUST BE
MOVED SLOWLY AND SUPPORTED BY AN ADDITIONAL PERSON TO AVOID LOSS OF BALANCE. DO
NOT KNOW OR DROP THE PRODUCT WHEN CARRYING IT. IF THE PRODUCT IS TO BE STORED
WITHOUT USING, IT SHOULD BE STORED WITHOUT OPENING ITS PACKAGING AND CASE. IF THE
PRODUCT IS TO BE USED AND STORED AGAIN, IT MUST BE PROTECTED BY CLEANING AND
PACKAGING
6- UNPACKING THE PACKAGE
CHECK THAT THE PRODUCT IS NOT DAMAGED DURING SHIPPING. CHECK THAT THE PARTS OF THE
PRODUCT ARRIVES COMPLETELY.
PARTS IN CONTACT WITH FOOD ARE MADE OF STAINLESS STEEL. PLASTIC PARTS IN CONTACT WITH
FOOD ARE MANUFACTURED ACCORDING TO FOOD REGULATIONS. ALL PLASTIC PARTS ARE MARKED
WITH THE MATERIAL SYMBOL.
DISPOSE THE PACKAGING MATERIALS OF THE PRODUCT AFTER INSTALLATION ACCORDING TO THE
SAFETY AND ENVIRONMENTAL CONDITIONS AND ACCORDING TO THE REGULATIONS OF THE
COUNTRY YOU ARE IN. TAKE THE RECYCLABLE MATERIAL (FOIL, CARTON, STYROFOAM, ETC.) INTO
THE RELEVANT RECYCLING BOXES. WHEN DISPOSAL OF ANY ELECTRICAL EQUIPMENT, MAKE IT
UNUSABLE BY CUTTING THE CABLE.
7- PRE-INSTALLATION INFORMATION
INSTALLATION MUST BE DONE BY AN AUTHORIZED TECHNICIAN ACCORDING TO THE INSTRUCTIONS
AND REGULATIONS. OUR COMPANY CANNOT BE LIABLE FOR ANY DAMAGES DUE TO INCORRECT
INSTALLATION.
IF THE PRODUCT FAILS, TURN OFF THE PRODUCT. ONLY A SERVICE AUTHORIZED BY THE
MANUFACTURER MUST PROVIDE THE PRODUCT.
FAULTS MUST BE REPLACED WITH ORIGINAL SPARE PARTS. THE PARTS LIST IS ALSO STATED IN THE
BOOKLET.
THE FLOOR ON THE PRODUCT MUST BE FLAT. NECESSARY PRECAUTIONS MUST BE TAKEN AGAINST
THE RISKS OF THE PRODUCT TO TURNOVER.
THE PRODUCT MUST BE CONNECTED TO THE MAIN NETWORK BY AN AUTHORIZED ELECTRICAL
TECHNICIAN ONLY IN ACCORDANCE WITH THE LAW AND REGULATIONS. MAKE SURE THAT THE
POWER FROM THE MAIN NETWORK WILL MATCH THE POWER OF THE PRODUCT. MAKE THE
GROUND CONNECTION OF THE PRODUCT ACCORDING TO THE STANDARDS AND SAFETY RULES.
GROUNDING OF THE PRODUCT MUST BE CONNECTED TO THE EARTH LINE ON THE NEAREST PANEL
OF THE ELECTRICAL INSTALLATION. THE PRODUCT ELECTRICAL CONNECTION, MAIN FUSE AND
LEAKAGE FUSE MUST COMPLY WITH THE APPLICABLE REGULATIONS AND RULES.
8- INSTALLATION AND USAGE
8.1-ELECTRICAL CONNECTION OF 1015 PD
THE ELECTRICAL CONNECTION OF YOUR MACHINE SHOULD BE PERFORMED BY AUTHORIZED
PERSONNEL. THE POWER VALUES AND CONNECTION DIAGRAM ON THE DEVICE SHOULD BE TAKEN
INTO ACCOUNT DURING THE CONNECTION PROCESS. THE DEVICE CONSUMES A TOTAL OF 6 KW OF
ENERGY, WITH 3X2 KW. THE DEVICE IS SHIPPED FROM THE FACTORY WITH A THREE-PHASE CABLE.
ANY INCORRECT PRACTICES SUCH AS TAKING THE
NEUTRAL FROM THE GROUND LINE WILL CAUSE
THE DEVICE TO BE EXCLUDED FROM THE
WARRANTY AND TO MALFUNCTION. THE
CONNECTION DIAGRAM IS AS FOLLOWS:
WARNING: INCORRECT CONNECTION WILL RESULT IN
DEVICE FAILURE AND EXCLUSION FROM WARRANTY
COVERAGE.
*IF USING A PLUG/OUTLET, MAKE SURE IT IS AT
LEAST 32 AMPS.
*ALWAYS BRIDGE THE PHASE WITH A PORCELAIN
TERMINAL.
*IF YOU ARE CONFUSED, ALWAYS SEEK TECHNICAL
SUPPORT BEFORE MAKING CONNECTIONS.
Altri manuali per 1015 PD
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali MAKFRY Friggitrice
