Makita 6912D Manuale

6912D

12mm Cordless ratchet wrench

This product was developed to make temporary

fastening of bolts and nuts easier for constructing

prefabricated houses.

It can also be used as an ordinary ratchet wrench to

finally tighten the bolts and nuts by swiveling its

handle clockwise with the ratchet mechanism.

The model 6912DW is made up of

6912D (Makita 12mm battery powered ratchet wrench)

DC7000 (Boosting charger)

The model 6912D does not include batteries.

Motor DC 7.2 magnet motor

No load speed(R.P.M.) 270

The size of the eyelet part of the wrench 21 mm in thickness with two eyelet parts together

Bolt size suitable for the model 1/25 inches

Temporary fastening with the torque by

Net weight(Kg) 20 kg-cm

0.85

Socket adapter --- One piece.

Battery model 7000

The standard equipment for the tools shown may differ form country to country

322

Specifications

Standard equipment

Optional accessories

CONCEPTION AND MAIN APPLICATIONS

Models No.

New Tool

TECHNICAL INFORMATION

Description

1) Replacement of the clutch

(1) Loosen the hexagon socket head cap screws 1(M4x18) and 2(M4x25) with hexagon socket screw keys. and

dismantle the sub-housing R and L, and housing R and L. (See the fig.1.)

Fig.1

(1)Hexagon socket head cap screw

(2)Hexagon socket head cap screw

Gripping position

(3)Sub-housing L

(4)Sub-housing R

(5)Housing L

(6)Housing R

Repair

(2) The parts from7 to 14 can be easily dismounted after the sub-housing R and L are taken off. Remove the housing

R and then remove the parts from 15 to 29 out of the housing L. (Care must be taken not to misplace 27 the

compression spring 6 in removing the parts.) (See fig.2.)

(3) 18 the spindle, 19 steel ball 3.5 20 compression spring 2.4 and 21 complete clutch cam assembly are the clutch

related parts. Other parts can be manually dismounted. (See the fig.2.)

(4) Remove 21 the complete clutch cam assembly from 18 the spindle.(Be careful not to scatter19 steel balls around

in removing the 21 complete clutch cam assembly as the 19 steel balls 3.5 are pressed against the 21 complete

clutch cam assembly with the 21 compression spring 2.4.) See the fig. 2.

(5) Replace the 20 Compression spring 2.4 and 21 complete clutch cam assembly together in replacing the clutch

(7)

(8)

(9)

(10)

(11)

(25) (28)

(27)

(26) (29)

(24)

(23)

(22)

(21)

(20)

(19)

(18)

(17)

(16)

(15)

(14)

(13)

(12)

(7)Torsion spring (8)Spring type catch (9)Ratchet holder (10)Socket 21 (11)Pin 4

(12)Ratchet pawl (13)Torsion spring 7 (14)Sleeve 4 (15)Collar (16)Needle bearing 1015

(17)Flat washer (18)Spindle (19)Steel ball 3.5 (20)Compression spring 24 (21)Complete clutch cam

(22)Spur gear 16 (23)Internal spur gear 49 (24)Flat washer (25)DC motor (26)Switch

(27)Compression spring 6 (28)Switch lever (29)Battery holder

Fig.2

Assembling

(1) Assemble the parts from 18 to 21.

Put the 19 steel balls 3.5 with the 20 compression spring 2.4 installed between the balls into the 3.6 mm

diameter bore at the end of the 18 spindle. Insert the steel balls aligned with the groove in the complete clutch

cam assembly by holding the 19 steel balls down. (See the fig. 3.)

(2) Mount the parts from (16) to (29) in the (5) housing L.

Fit the 28 switch lever in together with the 26 switch and also the 27 compression spring 6. Insert the 17 flat

washer 10 and 16 needle bearing 1015 in this order into the 18 spindle assembled in the above 1. Insert 3 pieces

of the 22 spur gears 16 into the 21 complete clutch cam assembly and engage the gears with the 23 internal spur

gear 49. Mount the 24 flat washer 15 at the same time.

(In assembling the internal spur gear, engage one of its slots against the rotation lock. Mount the 16 needle

bearing1015 by bringing it toward the left end as shown in the fig. 4.)(See the figs. 2, 3, & 4.)

(3) Assemble the 6 housing R and sub-housing R. (Confirm the 18 spindle can rotate smoothly, and that there is a

play in the axial direction after the housing and sub-housing are assembled.)

Hold it down Ditch

Hold it down

Grease

(18)Spring

(21)Complete clutch cam assembly

Fig.3

(5)Housing L

Place the needle bearing side on the motor side.

Bring the 16 needle bearing 1015 against this face.

(23)Internal spur gear 49 locking part

(28)Put the 28 switch lever through

Fig.4

(4) Turn the wrench upside down, and assemble the parts from 7 to 15.

Fig. 5

Mount the 1 hexagon socket head cap screw (M4x18) in the 4 sub-housing R, insert the 14 sleeve 4, and assemble

the 12 ratchet pawl and 13 torsion spring 7 as shown in the fig. 5.(Be careful not to catch the 14 torsion spring 7

between the 14 sleeve and 4 sub-housing in the above assembling process.)

Assemble the parts from 7 to 11 as shown in the fig.5, and mount the assembled one to the main body. (It is easier to

assemble the parts with the 15 collar positioned to the other side to the 12 ratchet pawl.)

(5) Mount the (3) sub-housing L and tighten the screws.(Install the spring washer on the nut for mounting the (1)

hexagon socket head cap screw (M4x18).)

(4)Sub-housing R

(12)Ratchet pawl

(5)Housing L

(13)Torsion spring

(14)Sleeve 4

(15)Collar

Assemble the parts from 7 to 10

by holding them down.

Assemble the (10) socket 21

by holding it down.

(10)Socket 21

(11)Pin 4

(7)Torsion spring5

(8)Spring type catch

(9)Ratchet holder

One with the longer

ground part.

Mount it on the main body.

One with the smaller diameter.

Fig.6

Altri manuali per 6912D

Altri manuali Makita Utensili elettrici

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale