Makita HM1400 Manuale

HM 1400

MAKITA Electric Breaker

This product is the one remodeled from8600S

with double insulation to comply with the

request from overseas in order to increase

sales. This is the model for export, which has

been developed for sales promotion.

Voltage(V) Current(A) Frequency(Hz) Consumed

power(W) Rated

output(W) Max.

output(W)

100 13 50-60 1240 660 1000

115 11 50-60 1240 660 1000

200 6.5 50-60 1240 660 1000

220 5.9 50-60 1240 660 1000

230 5.7 50-60 1240 660 1000

240 5.4 50-60 1240 660 1000

Blows per minute 1200 min

Tool size 30mm hex.

Use For striking(chisel finishing by bull point, cold chisel or scaling

chisel, ground digging by shovel, leveling by rammer etc.)

Net Weight(kg)

Cord length(m)

Hexagonal spanner 5,6

Bull point 30-410

Wooden box

Bull point

Cold chisel

Scaling chisel

Shovel

Rammer etc.

Common to 8600S, HM1300, HM1301

The standard equipment for the tools shown may differ form country to country

510

613

223

5m

17kg

Specifications

Standard equipment

Optional accessories

CONCEPTION AND MAIN APPLICATIONS

Models No.

New Tool

TECHNICAL INFORMATION

Description

1. Replacement of armature and field

Disassembly: follow the next procedure

(1) Take off E-ring, switch lever pin and

switch lever from the handle.

(2) Take off two hexagon socket bolts

M8x40 for mounting handle L and pull

out handle sleeve more than 2mm.

(3) Remove three pan head machine screws

M5x30 mounting handle L and handle R.

Then, take out handle L.

(4) Take off field lead wire from the switch terminal.

(5) Take off two hexagon socket bolts

M8x40 for mounting handle R and take

out handle R from crank housing.

Rear case Holder cap plate

Hexagon socket bolts M6X35

Handle sleeve

Hexagon socket

bolts M8X40

E-ring

Switch lever pin

Switch lever

Handle L

Handle R

Repair

(6) Remove holder cap plate, holder cap and carbon brushes.

(7) Take off four hexagon socket bolts

M6x35 for mounting rear case and remove rear case.

(8) Tap crank housing by resin hammer to remove motor housing.

(9) Motor housing, field, and armature are removed together.

Then, disassemble them in the same way as in other models.

Assembly: Follow the opposite procedure to the disassembly. Make sure of the following points;

(1) Mount screw seal to armature.

(2) First insert armature to crank housing,

then insert motor housing.

(3) Be sure to insert flat washer 24 at assembling rear case.

Ensure the mounting direction of rear case.

(4) Be sure of mounting field lead wire without slack.

2. Other procedures in disassembly and assembly are the same as in #8600S.

Screw seal

Flat washer 24 on the inside

projected part downward

Altri manuali per HM1400

6

Altri manuali Makita Utensili elettrici

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale