Maldol DB-25-M Manuale utente

USER’S MANUAL

VHF-UHF

Mobile transceiver

for radioamateur

This appliance is marked with the symbol for selecve sorng of waste

electrical and electronicequipment. This meansthahis product must be

removed by means of a selecve collecon system according to European

Direcve 2012/19 / EU either in order to be recycled or dismantled to

reduce any impact on the environment. For more informaon you can

contact your distributor, seller or your local or regional administraon.

Electronic products which have not been subject to selecve collecon

are potenally dangerous to the environment and public health due to

the possible presence of dangerous substances.

Do not dispose of unusable packaging in household waste; dispose of

them in containers intended for recycling.

In order to accomplish with RF exposure requirements for mobile transming

A devices, there must be a minimum distance of 20 cm between the antenna

and the people.

This device complies with Direcve 2011/65 / EU (RoHS) of the European Parliament and of the

Council of 8 June 2011 restricng the use of certain hazardous substances in electrical and

electronic equipment.

Areas de uso permido / List of praccable area / Zone d’ulisaon

Betroenen Länder / Lista delle aree autorizzate

USER’S MANUAL1

 SAFETY INFORMATION

Please observe the following precauons to prevent ?re. personal iniury, damage to the radio:

• Don‘ t use this machine when driving.

• This radio is designed to use 13.8V dc voltage, do not use the 24V power supply to the mobile

radio.

• Please do not place machine in the dust, moisture or water splashing.

• If there is any electromagnec interference, please keep the mobile radio away from the

sources such as TV set, engine generator etc.

• Do not expose the mobile radio to long periods of direct sunlight, for example on the

dashboard of a vehicle or close to heang appliances.

• If the mobile radio generate any smoke or strange smell, please turn o the power supply

immediately and make sure all is safe, then you can send the unit to the nearest aer-sale

center tor inspecon or repairment.

• Do not keep transming with high power output tor too long me, which may lead to

overheang and cause auto power o or failure.

MALDOL DB-25-M 2

PRODUCT INSPECTION

Welcome to use our mobile radio, before operaon, it is recommended that you:

• Please check the package is in good condion without any damage.

• Please unpack the package box carefully and check that all items are included.

• If you nd any items are missing or have been damaged during shipment, please contact your

dealer immediatly.

Standard accessories

Transceiver Microphone Mounng

bracket

Cigar-plug

power cable

Screws and fuse

USER’S MANUAL3

PRODUCT DESCRIPTION

1 Progress of the knob

2 Transmit indicator

3 Funcon keys

4 Call key

5 Monitor funcon

6 Power key

7 Power indicator

8 Volume Knob

9 Microphone Connector

10 FM radio funcon key

11 Exit the AB signal switching,

alarm funcon

12 Channel switching

13 Display screen

MALDOL DB-25-M 4

Front Panel Controls and Switches

[ ]: Press to enter menu selecon mode.

[ ]: In standby mode, press to send caller ID of selected signaling; in transming mode, press

to send repeater acvaon signaling..

[ ]: Press to turn on the squelch, repeater to turn o the squelch.

[ ]: Press and hold the key to turn on or turn o the power.

[ ]: Press to switch between channel mode and frequency mode.

[ ]: Press to select A band, B band or exit. Press and hold for 2 seconds to acvate alarm

funcon.

[ ]: Press to enter or exit FM radio mode.

Frequency Range Seng

Press and hold [F] key to turn on the radio and it will display ‘PASSWD’ on the screen, then input

correct password (six digits length) and it will display ‘185 179’ , at this me you can set all three

bands frequency range including VHF 135—179MHz and UHF 400—520MHz.

Example: For VHF 13 179, you can input ‘136174’ ( 136-174MHz).

For UHF 400 520, you can input ‘ 400 480‘ (400—480MHz).

Note: Aer frequency range is successfully programmed, users can operate only among the range.

Password Setup

Users can setup a password(6 digits) for PC program, please keep in mind or you are not allowed

to read or write the data without it.

CALL

MONI

V/M

EXIT/AB

USER’S MANUAL5

Channel Memory

Same TX RX frequency channel memory

1. Use keypad write require frequency, for example 145.000, press [F] key to menu 36,

press [F] key to show 001 ashing (choose channel number), press [F] key again to

show CH-001, press [EXIT] to complete the memory and exit.

2. Use keypad write require frequency, for example 146.000, press [F] key to menu 36,

press [F] key to show 002 ashing (choose channel number), press [F] key again to

show CH-002, press [EXIT] to complete the memory and exit.

3. Part A display channel: under menu 29, press [F] key to show, press [F] key FREQ

ashing, made choice by switch. CH shows channel, FREQ shows frequency and

channel number, press [F] key to complete.

4. Part B display channel: under menu 30 press [F] key to show, press [F] key FREQ

ashing, made choice by switch. CH shows channel, FREQ shows frequency and

channel number, press [F] key to complete.

5. Press PTT to exit menu, use [EXIT/AB] key to switch.

MALDOL DB-25-M 6

Dierent TX RX frequency channel memory (connect repeater)

1. Use keypad write require frequency, for example 164.500, press [F] key to menu 36, show

MEM-CH-001 press [H key to show 001 ashing , press [F] key again to show CH-001,

complete RX memory, press [EXIT].

2. Use keypad write require frequency, for example 158.800, press [F] key to menu 36,

showMEM-CH-001 press [F] key to show 001 ashing , press [F] key again complete

dierent frequency memory and press [EXIT].

Dierent TX RX frequency with CTSCC/DCS channel memory (connect repeater)

(For example RX 465.525 CTCSS 67.0 TX 455.525 DCS D023N)

1. Press [F] key to menu I1, show R-CTSCC/OFF, press [F] key show OFF ashing, use switch

choose

2. RX CTCSS 67.0, press [F] key complete.

3. Use switch choose menu 12 T-DCS/OFF, press [F] key show OFF ashing, choose DCS

DO23N, press [F] key conrm and press [EXIT] to complete.

4. Use keypad to write RX frequency 465.525, press [F] key to menu 36, show MEM-CH-001,

press [F] key to 001 ashing, press [F] key to conrm, display CH-001, RX memory

complete, press [EXIT].

5. Use keypad to write TX frequency, press [F] key to menu 36, show MEM-CH-001, press [F]

key let CH001 ashing. press [F] key conrm and press [EXIT] key to complete TX memory.

Indice

Manuali Ricetrasmettitore popolari di altre marche

Yaesu

Yaesu FT-7B Manuale utente

Kenwood

Kenwood ProTalk TK-3201 Manuale utente

Texas Instruments

Texas Instruments TLK10232 Manuale utente

Mizuho

Mizuho MX-2 Guida del prodotto

Kenwood

Kenwood TK-3180 Manuale operativo e di manutenzione

Blitz

Blitz MJ-398U Manuale utente

Utilicom

Utilicom LongRanger 2050 Manuale utente

Standart

Standart HX290UKA Manuale utente

Altronix

Altronix Pace1PTM Manuale utente

Kirisun

Kirisun PT2208 Manuale utente

ELECRAFT

ELECRAFT KX2 Manuale utente

Zodiac

Zodiac K3 Manuale utente

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuale utente

Kenwood

Kenwood TK-2217 Manuale utente

Siemens

Siemens PSO 4000 Manuale utente

Kenwood

Kenwood TS-590SG Manuale utente

Midland

Midland G8E-BT Manuale

ComNav

ComNav Mariner X2 Manuale utente