Manitowoc K00372 Manuale utente

K00372 ADAPTER KIT

Installation Instructions

The K00372 kit is used for installing Q-1400 or Q-Dual ice machines on a B-970 bin.

(Refer to Sheet 2 of 3 for pre-installation instructions.)

1. Note: Bin must be level before installation of ice machine.

A. Remove the foam tape from the front and sides of the bin where the stainless support/deflector will be located.

Use the support to reference the areas where the tape should be removed.

B. Place the support on the front edge of the bin and position as far forward as possible.

C. Locate the four pieces of the 2” long, 3/4” wide foam tape in the front corners, as shown.

D. Place the fillers on the bin, as shown. Make sure the two holes from the stainless support/deflector and fillers are

aligned on the side.

E. Using the fillers as templates, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum, in the bin.

Warning: Do not drill through the interior liner. Attach each filler with three 10-24 x .500” screws provided.

F. Apply foam tape to the front and back of the bin between the fillers.Note: All other required foam tape comes

preassembled with the stainless support/deflector and fillers.

G. Note: It is recommended to RTV intersections and along the inside edge of the foam tape to prevent water

tracking.

2. Refer to ice machine installation manual for ice machine installation procedures.

Filler

.75” Wide Foam Tape

INSTALLER: It is

recommended to RTV

intersections and along inside

edge of foam tape to prevent

water tracking

Filler

#10-24 x .50”L

Screws Typ

Stainless Steel

Support/Deflector

.75” x 2.00”L Foam Tape

Typ both front corners

.75” Wide Foam Tape

Manitowoc Ice, Inc.

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 8016283

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Sheet 1 of 3

Web Site - www.manitowocice.com 11/22/04

Pre-installation Instructions for Removal of Existing Plastic Deflector

1. Remove the left and right side cover screws (see View A).

2. Remove the cover to expose the four screws that secure the plastic deflector (see Detail B).

3. Take out the four screws. Remove the plastic deflector, replace with a polymer spacer on each side and secure with

the four screws.

4. Reinstall the cover and proceed with the installation instructions.

Plastic Deflector

Cover

Plastic Deflector

Screws

See Detail B

Detail B

View A

Cover Screw

8016283

Sheet 2 of 3

11/22/04

Deflector Instructions

1. Remove the splash shield, water pump, and water trough from the ice machine.

1. Install the ice deflector, as shown, using two #10-32 mounting screws and tapping plate. Center the ice deflector

directly beneath the water trough. The ice deflector must be secured with two mounting screws for proper operation

of the ice machine.

2. Reassemble the water trough, water pump, and splash shield.

Water

Pump

Splash

Shield

Water Trough

Ice Deflector

Frame Angle

#10-32 Mounting Screws

and Tapping Plate

8016283

Sheet 3 of 3

11/22/04

Altri manuali Manitowoc Accessori

Manitowoc

Manitowoc K00108 Manuale utente

Manitowoc

Manitowoc K00159 Manuale utente

Manitowoc

Manitowoc Marine Q 1000 Manuale utente

Manitowoc

Manitowoc K00384 Manuale utente

Manitowoc

Manitowoc SD0672C Manuale utente

Manitowoc

Manitowoc KH0179 Manuale utente

Manitowoc

Manitowoc RF0300 Manuale utente

Manitowoc

Manitowoc 7625573 Manuale utente

Manitowoc

Manitowoc K00014 Manuale utente

Manitowoc

Manitowoc Q210 series Istruzioni operative e di sicurezza

Manitowoc

Manitowoc K00066 Manuale utente

Manitowoc

Manitowoc K00175 Manuale utente

Manitowoc

Manitowoc IB00820 Manuale utente

Manitowoc

Manitowoc K00133 Manuale utente

Manitowoc

Manitowoc K00179 Manuale utente

Manitowoc

Manitowoc KH0178 Manuale utente

Manitowoc

Manitowoc Q-0320 Manuale utente

Manitowoc

Manitowoc K00341 Manuale utente

Manitowoc

Manitowoc K00105 Manuale utente

Manitowoc

Manitowoc K00119 Manuale utente

Manitowoc

Manitowoc K00160 Manuale utente

Manitowoc

Manitowoc K00375 Manuale utente

Manitowoc

Manitowoc CA200 Manuale utente

Manitowoc

Manitowoc Marine Q 1300 Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente