Manitowoc F Series Istruzioni per l’uso

Part Number: 000006528 12/15

Installation, Use & Care Manual

This manual is updated as new information and models are released. Visit our website for the latest manual www.

manitowocice.com

F Model

Ice Storage Bins

Table of Contents

Part Number: 000006528 12/15 3

Section 1

General Information

Model Numbers..................................................................................................................4

Before You Begin ................................................................................................................4

Section 2

Installation Instructions

Installation Procedure .......................................................................................................6

Drain Requirements...........................................................................................................6

Door Removal.....................................................................................................................7

Removing Lower Door Assembly.....................................................................................................7

Reinstalling Lower Door Assembly...................................................................................7

Section 3

Operation

Baffle Operation.................................................................................................................9

For More Ice..............................................................................................................................................9

For More Access......................................................................................................................................9

Using Ice Probe Tool Accessory .........................................................................................9

Section 4

Maintenance

Cleaning and Sanitizing Interior Bin ..............................................................................11

Cleaning Exterior Bin .......................................................................................................11

Section 5

Customer Support

Before Calling For Service Checklist ...............................................................................13

Limited Warranty For Ice Storage Bin & Dispensers......................................................14

LIMITED WARRANTY........................................................................................................................... 14

WHAT IS COVERED .............................................................................................................................. 14

EXCLUSIONS FROM COVERAGE...................................................................................................... 14

LIMITATIONS OF LIABILITY................................................................................................................14

REMEDIES............................................................................................................................................... 15

WARRANTY CLAIM PROCEDURE.................................................................................................... 15

GOVERNING LAW.................................................................................................................................15

COMPLETE AND RETAIN FOR YOUR RECORD: ........................................................................... 15

4 Part Number: 000006528 12/15

Table of Contents (continued)

Part Number: 000006528 12/15 5

Model Numbers

This manual covers the following models

Single Door Upright

Ice Storage Bins

F700

F1300

F1325

F1650

Before You Begin

After uncrating and removing all packing material, inspect

the equipment for concealed shipping damage. If damage

is found, notify the shipper immediately

nWarning

Top is NOT fastened to bin. Be aware of this to avoid

personal injury.

nWarning

PERSONAL INJURY POTENTIAL

Do not operate equipment that has been misused,

abused, neglected, damaged, or altered/modified

from that of original manufactured specifications. This

appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision concerning

use of theappliance by a person responsible for their

safety.

,Caution

Avoid excessive tightening force when connecting to

the bin drain fitting. Overtightening may cause damage.

,Caution

Do not apply excessive heat if any sweating of fittings

is necessary. Heat conduction through metal may melt

threads in plastic drain fitting.

,Caution

30” large capacity ice storage bins must be attached to

the wall.

Section 1

General Information

6 Part Number: 000006528 12/15

General Information Section 1

THIS PAGE INTENTIONALLY LEFT BLANK

Part Number: 000006528 12/15 7

Installation Procedure

1. Remove all packing material from bin.

2. Remove all tape and temporary fastenings from door

assemblies and outside of bin.

3. Remove top from bin.

4. Remove set of four legs and any other accessories

packed inside bin.

5. Lay bin on back, being careful to protect finish, and

remove bolts holding skid to bin.

6. Screw legs into tapped holes in bin bottom and tighten

to seat legs well against bottom.

7. Set bin upright.

8. Reinstall top onto bin.

9. Remove protective paper from stainless steel exterior.

10. Move bin to permanent location.

11. Adjust“foot” at bottom of each leg to level bin in both

directions.

12. Mount ice machine(s) on bin in accordance with ice

machine instructions.

13. Connect drain line to 1”FPT female fitting located in

bottom of bin.

14. Make final connections to ice machine.

Drain Requirements

• Bin drain termination must have an air gap.

• Drain lines must have a 1.5 inch drop per 5 feet of run

(2.5 cm per meter), and must not create traps.

• The floor drain must be large enough to accommodate

drainage from all drains.

• Run separate bin and ice machine drain lines and

insulate to prevent condensation.

Section 2

Installation Instructions

8 Part Number: 000006528 12/15

Installation Instructions Section 2

Door Removal

REMOVING LOWER DOOR ASSEMBLY

(Only if required for access through narrow doors)

1. With door in closed position, remove Phillips head

screw and washer from hinge area on each side of

lower access door.

2. Insert screwdriver between door and hinge bracket on

one side of door and gently push against bracket to

provide room for door stud to clear bracket.

3. Remove access door.

4. Pull up on baffle to remove.

5. Remove screws along top of door assembly.

6. Pull forward on top of assembly and lift to remove.

ACCESS

DOOR

BAFFLE

LOWER

DOOR

ASSEMBLY

Reinstalling Lower Door Assembly

1. Reinstall lower door assembly in bin opening.

2. Reinstall screws in hood at top of door assembly.

3. Reinstall baffle in side panel tracks and push down to

seat.

4. With door in closed position, insert one door stud

through hinge bracket, install washer, screw and

tighten.

NOTE: For proper operation the access door must be

reinstalled in the closed position.

5. On other side, insert screwdriver between door and

hinge bracket and gently push against bracket to

provide room for door stud to clear bracket.

6. Reinstall washer and screw in lift door and tighten.

7. Check door to ensure proper operation.

Part Number: 000006528 12/15 9

Baffle Operation

The baffle controls the flow of ice into lower door assembly

area for removal with either a scoop or shovel. The baffle

can also be adjusted and locked at one of several levels to

accommodate flow characteristics of different types of ice.

Bin is shipped with the baffle in full down position. The

baffle can be raised and locked in higher position for better

flow or when more access is needed

FOR MORE ICE

If more ice is needed in lower door area:

1. Use full-length handle at top of the baffle to gently

lift and jiggle the baffle to encourage ice to flow into

access area of the bin. (Loose ice will cascade into lower

door area.)

2. When adequate ice has flowed, push the baffle back

down.

FOR MORE ACCESS

When more access is needed or to encourage flow of less

“slippery” ice:

1. Lock gate at higher level by pulling up and holding

the baffle at correct level, and pushing tapered end of

catch into nearest hole in gate (catch will automatically

release when you pull up).

2. To release catch, pull up on the baffle.

Using Ice Probe Tool Accessory

Ice probe tool is an optional accessory. If your bin has been

ordered with ice probe tool accessory, mount probe for

easy access on either side of bin in bracket provided.

If there is adequate ice in bin but lower door area is not

filled with ice, it may be that ice has congealed in bin and

cannot flow. This can often be remedied by quickly jiggling

the baffle several times (see preceding, Baffle Operation).

If problem continues, probe tool can be inserted through

rectangular openings in the baffle and agitated back and

forth to break up congealed ice mass

nWarning

Use probe tool only as described above. To avoid

possible injury, keep head and face clear of lower door

area and tool at all times. Do not use probe tool for

other purposes.

Section 3

Operation

10 Part Number: 000006528 12/15

Operation Section 3

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Manitowoc Macchina per il ghiaccio

Manitowoc

Manitowoc UnderCounter QM45 Istruzioni per l’uso

Manitowoc

Manitowoc QM20 Series Manuale utente

Manitowoc

Manitowoc SM050 Manuale utente

Manitowoc

Manitowoc UG Series Manuale utente

Manitowoc

Manitowoc RFF Manuale utente

Manitowoc

Manitowoc Q 1800 Guida

Manitowoc

Manitowoc QM30 Series Guida

Manitowoc

Manitowoc RF0244 Istruzioni per l’uso

Manitowoc

Manitowoc Indigo I1200 Manuale utente

Manitowoc

Manitowoc RFF Series Manuale utente

Manitowoc

Manitowoc SD0672C Manuale utente

Manitowoc

Manitowoc AUCS-SI K00363 Manuale utente

Manitowoc

Manitowoc GR-0800A Manuale utente

Manitowoc

Manitowoc I1406 Series Istruzioni operative e di sicurezza

Manitowoc

Manitowoc QM20 Series Manuale utente

Manitowoc

Manitowoc Indigo Series Manuale utente

Manitowoc

Manitowoc Q130 series Manuale

Manitowoc

Manitowoc Q Manuale utente

Manitowoc

Manitowoc UDE065A Manuale utente

Manitowoc

Manitowoc WELTBILT NEO 310 Manuale utente

Manitowoc

Manitowoc Indigo I0300 Manuale utente

Manitowoc

Manitowoc S model Istruzioni per l’uso

Manitowoc

Manitowoc SN20 Istruzioni per l’uso

Manitowoc

Manitowoc Indigo NXT Manuale utente

Manuali Macchina per il ghiaccio popolari di altre marche

Hoshizaki

Hoshizaki KMD-460MWJ Manuale utente

Sub-Zero

Sub-Zero 315I Istruzioni per l’uso

Unold

Unold 48945 Manuale utente

Kenmore

Kenmore 2217402A Manuale utente

Cornelius

Cornelius WM600 Istruzioni operative

GE XPIO43SCSS Manuale utente

Hoshizaki

Hoshizaki KMD-901MAH Manuale utente

Whynter

Whynter FIM-450HA Manuale utente

U-Line

U-Line UMCR014-SC01A Manuale di installazione

Andrew James

Andrew James AJ000522 Manuale utente

Scotsman

Scotsman CME1356 Manuale utente

Scotsman

Scotsman ACM 25 Manuale utente

Kärcher

Kärcher IP 120 Manuale utente

U-Line

U-Line SS1095 Manuale utente

Maytag

Maytag MIM1554WRS - Ice Maker Manuale utente

Hoshizaki

Hoshizaki KM-630MAH Manuale utente

Princess

Princess Yonanas Manuale utente

Unold

Unold 48946 Manuale utente