Maplin N63LZ Manuale utente
• Suitable for 5 years+
•Maximum user weight: 25kg
•Adult assembly required
Please keep this manual for future reference as it contains important
information.
Before first time use, charge the battery for at least 4-6 hours.
OWNER'S MANUAL
Read and understand this entire manual before using!
CHILDREN'S
ELECTRONIC TOY CAR
Thank you for your purchasing our products, we wants your child to enjoy this product for years to
come. Keep these points in mind as you read this guide:
1. About Your New Vehicle
2. Parts List
3. Assembly Steps
4. How To Operation Your Vehicle
5. Charging The Vehicle
6. Troubleshooting Guide
7. Maintaining Your Vehicle
8. Disposal Of Battery
Suitable age: 5+ years Battery: 6V 4.5AH *1
Load Capacity:
Under 25KGS
Size of car:
102*53*66CM
Speed: 2KM/H
Power way:
Charging type
Charger:
Input: depend on local voltage
Output: DC 6V500mA
Average
battery life:
Approximately
300 times
Charge time: 8-12 Hours Fuse: 5A
Table of Contents
About Your New Vehicle
FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND
ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.
• ADULT ASSEMBLY REQUIRED. The product contains small parts, which are for
adult assembly only. Keep small children away when assembling.
• Always remove protective material and poly bags and dispose before assembly.
WARNING!
NO.
34
56
78
9
11
1
11
11
12
23
2
1
1
1
Part Part
10
11
13
12
14
2
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
Vehicle
body
Handle
bar
Front
fork
Wheel
cover(L)
Wheel
cover(R)
Dashboard
Shock
absorber
Face
guard
Front
wheel
Foot
board
pole
Foot
board
Front
axle
Side
wheel
Placed
in the
assembly
package
Ø10
Lock nut
Parts List
NO.
Part Par
11
22
14
16
15
17 18
20
19
25
24
NO.
Part Par
NO.
Part Par
31
2
21
1
22
1
23
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
Ø8
cap nut
Ø6
Lock nut
Ø10
bush
Ø10
washer
Front
fender
Charger
M6x20
bolt
M6x60
machine
screw
M4x12
screw
M10x90
bolt
Spanner
1pcs
for spare
Assembly package
Parts List
1
• Your new vehicle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
• Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
• Assembly tools for need(NOT INCLUDED): screwdriver, hummer and spanner.
M6x60 machine screw
Dashboard
Handle bar
Front fork
Ø10
Lock nut
Assembly Steps
●Remove all the parts from the front fork.
●Using the M6x60 machine screw to fit
the dashboard, Handle bar and front fork,
and tighten the
Ø10 locknut with a
screwdriver.
2
3
Ø10
locknut
Ø10
washer
Wheel
cover(L)
Wheel
cover(R)
Ø10
bush
Front
axle
Front
wheel
Shock
absorber
Front fork
assembly
Assembly Steps
●Remove the screw at the back of the
face guard with a screwdriver, and
remove the battery cover.
●Insert 2 AA(LR6)alkaline batteries.
Replace the battery cover.
NOTE: The product does not included
AA(LR6)alkaline batteries.
●Slide two shock
absorbers onto the front
fork assembly.
●Slide the wheel
cover(R) and wheel
cover(L) onto the front fork
assembly.
●Insert two
Ø10 bush
into the front wheel.
●Fit the front wheel into
the front fork assembly.
●Insert the front axle
through the wheel covers,
front fork assembly,
Ø10
bush and front wheel.
●Fit a
Ø10 washer onto
the front axle.
Tighten the
Ø10 locknut(DO NOT
over tighten).
Repeat for
other side to secure the
front wheel.
4
Batteries may leak fluids that can cause chemical burn injury or ruin your product. To avoid battery leakage:
Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
Insert batteries as indicated inside the battery compartment.
Remove batteries during long periods of non-use. Always remove exhaustedbatteries from the product.
Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak.
●Never short-circuit the battery terminals.
●Non-rechargeable batteries are not to be recharged.
●Use only batteries of the same or equivalent type as recommended.
●Do not charge non-rechargeable batteries.
●Remove rechargeable batteries from the product before charging.
●If removable rechargeable batteries are used, they are only to be charged under adult supervision.
BATTERY INFORMATION
Ø4x12 screw
Face guard
Front wheel
assembly
Assembly Steps
●Plug the connectors on the dashboard into the connectors at the back of the face guard.
●Fit and hold the faceguard against the front fork wheel assembly.
●Insert two
Ø
4x12 screw through the front fork wheel assembly and into the face guard.
●Tighten the screws with a screwdriver. DO NOT over tighten.
5
6
7
Ø8
cap nut
Foot board
pole
Foot board
Fender
Front wheel
assembly
M6x20
bolt
Side wheel
HOLE
Assembly Steps
●Fit and hold the side wheel against the
vehicle body.
●Insert two
M6x20 bolt
through the side
wheel and into the vehicle body.
●Tighten the bolts with a spanner. DO
NOT over tighten.
●Repeat for the other side.
●Fit a
Ø8 cap nut onto the end of the
foot board pole with a hummer.
●Fit and hold the foot board against the
vehicle body. Make sure the foot board
match to the vehicle body.
●Insert the foot board pole through the
hole in the foot board and the hole in the
vehicle body.
●Fit the other foot board onto the foot
board pole.
●Fit the other
Ø8 cap nut onto the end
of the foot board pole with a hummer.
●Fit the fender to the front wheel
assembly.
●Push until you hear it click into place.
9
10
8
Vehicle
connector
Handle bar
connector
Motor
connector
Wire
connector
Ø10
locknut
Assembly Steps
●Fit handle bar to the vehicle body.
●Inerst the M10x90 bolt through the hole in the handle bar assembly and the hole in the vehicle body.
●Tighten the
Ø10 locknut with a spanner.
●Plug the motor connector into the
vehicle connector.
●Plug the handle bar connector into the wire connector.
M10x90 bolt
Handle bar assembly
Vehicle body
WARNING!
PREVENT INJURIES AND DEATHS:
• NEVER LEAVE CHILD UNATTENDED. DIRECT ADULT SUPERVISION
IS REQUIRED. Always keep child in view when child is in vehicle.
• Never use in roadways, near cars, on or near steep inclines or steps,
swimming pools or other bodies of water.
• Always wear shoes.
• Always sit on the seat.
• Suitable for age 5 years+; Maximum user weight is 25kgs.
READTHESE RULESALOUDTOYOUR CHILDANDTHEIR PLAYMATES AND MAKE SURE
THEY UNDERSTAND THEM!
• Important! Before using the vehicle for the first time, the battery needs to be charged for 4 to 6 hours, no
more than 10 hours. Only an adult can charge or recharge the battery.
• Finishing the complete car to assemble according to the steps that the manual described. The plug-in
package of storage battery has already been inserted well, the power has already been put through.
• All places to need the screw guarantee the screw has already been locked.
• Always wear a helmet when riding.
• Direct Adult Supervision Required.
• Keep Children within Safe Riding Areas:
• Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps, swimming
pools or other bodies of water;
• Use the toy only on flat surfaces. such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident. Operate the
vehicle only in the daytime or a well-lit area.
• It is not recommended to drive the vehicle on wet surfaces or on lopes of greater than 15 degrees.
• Do not use this vehicle outdoors when it is raining or snowing.
• Make sure you come to a complete stop before changing directions from forward to back.
• Please follow the correct weight and age limits allowed to drive this vehicle.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• In order to avoid accidents, please ensure the vehicle is safe before riding.
• Do not let any child touch the wheels or be near them when the car is moving .
How To Operate Your Vehicle
Rules for Safe Riding
Must confirm before using that following work which is already finished:
Indice
