Marathon WW194014 Manuale utente
WATCH, WRIST:
PILOT’S CHRONOGRAPH
MONTRE-BRACELET :
CHRONOGRAPHE DE PILOTE
P/N WW194014
INSTRUCTIONS | MODE D’EMPLOI
The CHRONOGRAPH is a high quality precision instrument. In order to utilize its features,
it is advised to read the following notes before use.
• The Chronograph is a particularly heavy instrument. Be careful not to drop it when
mounting it on the wrist.
• Do not adjust DAY & DATE between 21:00 and 01:00.
Adjusting the gay and date in this position will cause damage to the day and date
mechanism and void the warranty
• The crown and pusher lock rings must be completely screwed in before submerging
the Chronograph in water.
• Use only certified service centres for servicing the Chronograph otherwise the warranty
is void.
TABLE OF CONTENTS ENGLISH
1. SETTING THE TIME
2. SETTING THE DAY AND DATE
3. CHRONOGRAPH TIMING FUNCTIONS
4. OVERVIEW
5. TECHNICAL SPECIFICATIONS
1. SETTING THE TIME ENGLISH
1. Unscrew the crown from position 1to position 2.
2. Pull the crown out of position 4.
3. Turn the crown clockwise or counterclockwise to adjust the time.
NOTE: When the crown is in position 4 the second hand stops so that
the time can be synchronized with an accurate time source.
*If your Chronograph watch has stopped, you may wind the crown clockwise
while in position 2. Turn the crown six to ten full turn to restart the movement.
Then set the time by pulling out the crown to position 4. Once the watch is set
onto one’s wrist, it will automatically self-wind by the normal motion of the wrist.
2. SETTING THE DAY AND DATE ENGLISH
1. Unscrew the crown from position 1to position 2.
2. Pull the crown out of position 3.
3. Turn the crown clockwise or counterclockwise to change the date or
counterclockwise to change the day*.
4. Pull the crown out to position 4to adjust the time so that the date
changes at midnight and not at mid-day (12 noon).
*If your Chronograph watch has stopped, you may wind the crown clockwise
while in position 2. Turn the crown six to ten full turn to restart the movement.
Then set the time by pulling out the crown to position 4. Once the watch is
set onto one’s wrist, it will automatically self-wind by the normal motion of
the wrist.
CAUTION: Do not attempt to set day and date if the hands are positioned between 21:00
hours and 01:00 hours. Adjusting the day and date in this position will cause damage to
the day and date mechanism and void the warranty
3. CHRONOGRAPH TIMING FUNCTIONS ENGLISH
1. Completely unscrew pusher lock rings Aand B.
2. Press pusher A to start the chronograph count-up timing.
3. Press pusher A to stop/interrupt the chronograph count-up timing.
4. Press pusher B to return the chronograph hands to zero. ( This only works
when chronograph hands are in the stopped position.)
5. Completely screw in the pusher lock rings when finished timing.
(Example: for “start”, “stop”, “start” : press pusher A,A, A)
CAUTION: Do not use push buttons underwater. Ensure that pusher lock rings are
completely screwed in when not in use . This is essential to prevent moisture damage to
the movement.
NOTE: The crown stays in position
1 when using the Chronograph
timing function.
SUB-DIALS:
The top inset dial registers 30
minute intervals. The bottom
inset dial registers 12 hours with
indicators at every 30 minutes.
4.OVERVIEW ENGLISH
TECHNICAL SPECIFICATIONS CONTINUED ENGLISH
• SWISS MADE
• Caliber ETA Valjoux 7750, mechanical movement
• Automatic winding
• 28,800 balance-wheel oscillations per hour
• 25 jewels
• Incabloc shock protection of balance-wheel
• Glucydur balance wheel
• Nivarox No. 1 hairspring
• 42 hours minimum reserve power (when fully wound)
• Chronograph read-out (countdown) 60 seconds, 30 minutes,
12 hours on sub-registers
• Available with:
i) black natural rubber strap
ii) optional stainless steel adjustable bracelet
P/N WW005007 (not included)
5. TECHNICAL SPECIFICATIONS ENGLISH
• Heavy-duty stainless steel case - weight 156 grams
• Screw-in pushers
• Screw-in crown
• Unidirectional turning bezel to cover 60 minutes
• Black inner ring with hundredth divisions as follows:
15 min = 25 decimals
30 min = 50 decimals
45 min = 75 decimals
60 min = 100 decimals
• Matte black easy-to-read dial background
• Easy-to-read day and date windows
• Scratch resistant sapphire crystal
TECHNICAL SPECIFICATIONS CONTINUED ENGLISH
• Tritium gas tubes are fitted to hour and minute hands
and each hour index
• Superluminova C3 luminous triangle on turning bezel
• Superluminova C3 luminous dots on minute and hour sub-dials, and on the
tip of the centre-second hand
• Waterproof to a depth of 300 m / 1000 feet
•Each watch has a unique serial number
WARNING:
a) This Chronograph is very heavy and care should be taken when
mounting onto wrist. Do not let the Chronograph drop on hard surface.
b) Ensure that the winding-crown and the two pusher lock rings are
completely screwed-in before entering water.
Indice
Lingue:
Altri manuali Marathon Orologio
Marathon
Marathon Arctic WW194026 Manuale utente
Marathon
Marathon WW194007 Manuale utente
Marathon
Marathon WS-RB-3PC Manuale utente
Marathon
Marathon WW194003SS Manuale utente
Marathon
Marathon Adanac 7000 ST083022 Manuale utente
Marathon
Marathon SSNAV-D Manuale utente
Marathon
Marathon SSNAV Manuale utente
Marathon
Marathon WW194007 Manuale utente
Marathon
Marathon Adanac 7000 ST083022 Manuale utente
Marathon
Marathon Diver’s Automatic Manuale utente
