Marchetti SMART TOWER Scheda tecnica

www.marchetti.eu

Instructions Manual EN 1298 – IM – it x en

Mobile access towers must only be used for nishing, maintenance and similar works. This instructions

manual contains important instructions on use, maintenance and safety of the mobile access tower;

the operator must be completely aware of them before use. Strictly complying with this manual

means working in compliance with the provisions of the current standard on health and safety in the

workplace Leg. Decree. 09.04.2008 no. 81.

Code 11211

DOC. CUSTOMER ASSISTANCE

N. 136 REV. 0 DEL 23/04/2018

MARCHETTI S.r.l.

Via Piemonte, 22

06062 Città della Pieve - Perugia - Italy

Tel. + 39 0578 20348 - Fax + 39 0578 226488

info@marchetti.eu

www.marchetti.eu

Instructions for use

and maintenance

European standard EN 1004

The products identied in this handbook have

been manufactured by MARCHETTI s.r.l. With

QUALITY SYSTEM MANAGEMENT, certied by Tuv

Italia, in accordance with ISO 9001

MOBILE ACCESS TOWER

SMART TOWER

www.marchetti.eu

ATTENTION:

• Read and understand this manual in its

entirety.

• Follow the instructions as indicated.

• Before any installation, verify the integrity

of each individual component.

Donotusedamagedornotwholecomponents

The mobile access tower on wheels is made

according to the standards.

Any changes made by others invalidate the

manifacturer’s responsibility.

ENG

TABLE OF CONTENTS:

1. REFERENCE STANDARDS pag. 4

2. DESIGNATION, CLASS, CAPACITY pag. 4

3. DECLARATION OF CONFORMITY pag. 5

4 GENERAL INFORMATION pag. 6

4.1 Access to working surfaces pag. 6

4.2 Maximum heights of the conguration EN 1004 pag. 6

5 IDENTIFICATION pag. 7

Table of elements composing the congurations A1 - A2 - A3 pag. 7

To create congurations with nal tower H=0.85 m (A1T-A2T-A3T) pag. 7

simply add the following elements

“SMART TOWER”TOWER DESIGN pag. 8

CONFIGURATIONS UNI EN 1004 pag. 9

6. ASSEMBLY AND DISMANTLING pag. 10

6.1 General information pag. 10

6.2 Preliminary tests pag. 10

6.3 Assembly instructions pag. 10

6.4 Dismantling instructions pag. 13

7. STABILITY pag. 13

8. USE pag. 13

8.1 Preliminary controls pag. 13

8.2 Use pag. 14

8.3 Movement procedure pag. 14

9. CHECKS, CARE AND MAINTENANCE pag. 14

• INSTRUCTIONS FOR USE AND MAINTENANCE pag. 15

Legislative Decree 09.04.2008 no. 81

10. GENERAL INFORMATION pag. 16

10.1 Congurations table according to Leg. Decree 81/08 pag. 16

10.2 Access to working surfaces pag. 17

10.3 Information completion pag. 17

• CHECK LIST pag. 18

www.marchetti.eu

1. REFERENCE STANDARDS

- Leg. Decree 09.04.2008 no. 81 (O.G. no. 101 dated 30.04.08) “Consolidating act on health and

safety in the workplace”.

- EN 1004 (July 2005) “Mobile access and working towers) composed of prefabricated elements.

Materials, dimensions, design loads, safety and performance requirements”;

- EN 1298 (February 1996) “Mobile access towers. Regulations and guidelines for preparation of an

instructions manual”;

- Leg. Decree 06.09.2005 no. 206 (O.G. no. 235 on 08.10.05 – Ordinary Supplement no. 162)

“Consumers’ Code”.

2. DESIGNATION, CLASS, CAPACITY

SMART TOWER mobile access tower EN 1004 – 3 – 5 / 5 XXCD

manufactured in compliance with Leg. Decree 81/08 and Technical Standard EN 1004;

Class of loads distributed uniformly equal to “3” (2.0 KN/m2);

- Maximum height permitted of the work platform equal to 5,50 metres both outside and inside

buildings. Inside is intended as without wind.

- The overall load permitted for each tower is therefore 200 kg.

- The maximum number of surfaces loaded at the same time is 2.

- The sum of the loads relating to each surface must not exceed the overall value of the load

permitted for the scaolding.

ENG

3. DECLARATION OF CONFORMITY

www.marchetti.eu

DECLARATION OF CONFORMITY

MARCHETTI s.r.l.

with headquarters in Città della Pieve (Pg) - Via Piemonte, 22:

- that the mobile tower SMART TOWER was manufactured in

compliance with Leg. Decree 09.04.2008 no. 81 and in particular

the Technical Standard EN 1004 (July 2005)

- that it is manufactured in compliance with the prototype which

has surpassed rigidity testing, pursuant to Appendix “A” of the

Technical Standard EN 1004 (2005) and that it was subject, with a

positive outcome, with the ASSESSMENT as outlined in point 13 of

the Technical Standard EN 1004 (2005) at the:

UNIVERSITY OF PERUGIA Certicate no. Marc 141

- the identication marking is outlined on all specimens of the

products and on the Instructions Manual drafted according to

specications in Technical Specication EN1298 (point 9 of the

Technical Standard EN 1004).

DECLARES

www.marchetti.eu

4. GENERAL INFORMATION

4.1 Access to work platform

Access to the work platform can only take place inside the tower using one of the following methods:

- vertical rung ladder, composed of beams on the side frames of the structure

- inclined rung ladder, internal

- inclined step ladder, internal.

4.2 Maximum heights of the conguration EN 1004

The maximum height of the work platform without using the stabiliser braces is 1.90 metres (maximum

tower height 3,25 metres).

The maximum height of the work platform using the stabiliser braces is 5,50 metres both inside and

outside buildings.

The minimum open height between the work platform is 1.90 metres.

The maximum vertical distance between the work platform is 4.20 metres.

The maximum vertical distance between the oor and the rst level is 4.60 metres.

ENG

5. IDENTIFICATION

EN 1004 - Class “3” (2.00 KN/m2)

Overall permitted load 200 kg

Maximum number of surfaces loaded simultaneously

Table of elements composing the congurations A1 - A2 - A3 - A4

Code Component Elements Weight CONFIGURATIONS

Kg A1 A2 A3 A4

21386 Smart più 28,00

1 33815 Foldable base 17,00 1 1 1 1

2 21936 Horizontal brace 4,50 0 1 1 1

3 33831 Work platform 10,5 0 0 0 0

21387 Tower 9,00

4 33835 Frame 4,50 0 2 4 6

5 21936 Horizontal brace 4,00 0 2 4 4

21388 Work platform with toeboards 17,5

6 33831 Work platform 10,5 1 1 1 2

7 11182 Long toeboards -166 3,00 2 2 2 4

8 11051 Short toeboards-75 0,50 2 2 2 4

20998 Stabilizers kit 16,00

9 20807 Stabilizers 4,00 0 4 4 4

To create congurations with nal tower H=0.85 m (A2T-A3T-A4T)

simply add the following elements

Code Component Elements Weight CONFIGURATIONS

Kg A2T A3T A4T

21393 Terminal tower 3,00 1 1 1

10 Final frame 1,50 2 2 2

11 Horizontal brace 4,00 2 2 2

www.marchetti.eu

“SMART TOWER”TOWER DESIGN

33815 FOLDABLE BASE

21393 FINAL TOWER

21936 HORIZONTAL BRACE

33831 WORK PLATFORM

20998 STABILIZERS

21387 TOWER 21388 WORK PLATFORM

WITH TOEBOARDS

ENG

CONFIGURATIONS EN 1004

H Tower = 3,25 m

H Work = 1,90 m

A3T

H Tower = 5,16 m

H Work = 4,00 m

A2T

H Tower = 3,66 m

H Work = 2,50 m

H Tower= 6,25 m

H Work = 4,90 m

H Tower = 4,75 m

H Work = 3,40 m

A4T

H Tower = 6,66 m

H Work = 5,50 m

Smart Più

H Tower = 1,75 m

H Work = 1,00 m

H Tower = 1,75 m

H Work = 1,00 m

www.marchetti.eu

6. ASSEMBLY AND DISMANTLING

6.1 General information

a) For assembly and dismantling of the mobile access towers, at least 2 people are necessary and it

is indispensable they are familiar with the assembly and use instructions;

b) Based on the height which must be reached, choose to set up one of the congurations outlined

on page 9. The list, the weight and quantity of the elements necessary for assembly are outlined

on page 7.

c) No damaged components must be used;

d) Only original parts must be used as indicated by the manufacturer.

6.2 Preliminary tests

a) The surfaces on which the tower is assembled and subsequently moved (if necessary) must be

capable of supporting the weight, it must be perfectly level and guarantee distribution of the

load, perhaps using planks or other equivalent devices;

b) Absence must be ensured of obstacles;

c) The assembly operations can only start in the absence of wind;

d) All the elements must be checked, accessory tools and safety equipment to assemble the tower

are available on site;

e) The verticality of the mobile towers must be checked with the level supplied.

6.3 Assembly instructions

Having conducted the checks on par. 6.2, proceed to assemble the base section:

A) Open completely the foldable base.

B) Place the work platform at the desired height.

Indice

Altri manuali Marchetti Rack e supporto

Marchetti

Marchetti DINAMICO Series Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente