Maretti 19.8643.92 Manuale utente

1/3

GUARANTEE TERMS AND CONDITIONS

The other party should inspect the delivered items immediately upon receipt with regard to its soundness. Entitlements to repair or replacement

only exist if the other party

- In the case of visible defects, informs MPV of them immediately.

- In the case of defects that are not visible, informs MPV in writing of the defects, within 2 working days after the day the defects were

found, or in all reason could have been found and furthermore demonstrates that the MPV instructions for use, maintenance and operation

were followed, whilst the defects are not the consequence of normal wear and tear, misuse, negligence, accident, exceeding the limits

prescribed by the MPV or by the legal safety regulations, or, in the case of a repair or change without MPV’s consent or the consent of its

recognised repairer, there will be no entitlement to repairs or replacement. The parts that have to be replaced must be made available free

of charge to MPV. Noncompliance by the other party to one or more of its obligations will release MPV of all its guarantee obligations.

In the case of assembly of the other party’s own products by Maretti, MPV will release itself from all guarantee stipulations.

Moreover, our general delivery terms and conditions are applicable. These can be obtained from Maretti or can be downloaded from www.maretti.com

The installation must be done by a competent installer. Maretti recommends that your (outside) lighting and xtures are inspected and

maintained annually.

D: Für Garantiebedingungen bitte lesen Sie unsere Webseite www.maretti.com

E: Consulte nuestro sitio web para los condiciones de garantia www.maretti.com

FR: Consultez notre site web pour les conditions de garantie www.maretti.com

NL: Voor garantievoorwaarden zie onze website www.maretti.com

Maretti Lighting

Bolderweg 7

1332 AX Almere

the Netherlands

T+31 (0) 36 532 66 12

F+31 (0) 36 532 17 35

E[email protected]

Wwww.maretti.com

Maretti Lighting is well-known in the World of interior design. In businesses, homes, store chains, and hospitality facilities

all over the world, Maretti is unmistakable present with its project lighting that does more than just provide light. We

make lighting an essential part of the interior. Maretti stands for stylish top quality and trendsetting design, modern,

timeless and most of all, original.

Maretti Lighting works with all the top brands in the lighting industry, but we are especially notable for our own large

product line and introduce our own brand name “Maretti”. Our production team distinguishes itself time and time

again with unique innovations from our own atelier and therefore our projects exude an entirely unique identity.

Our IM was made with the greatest of care. Nevertheless, the colours displayed in the IM may differ slightly from the real

colours because of the printing process. Colour, size and range are subject to change. Nothing from this IM may be copied,

reproduced and/or published by print, photocopy or in any other way without Maretti Lighting’s written permission. All

product and design copyrights belong to Maretti Lighting.

19.8643.92*

TUNABLE

WHITE

TUNABLE

WHITE LED

GENERAL INFORMATION

VDC VOLTAGE IP20 IP RATING Ra90 CRI 100% 1000H LUMEN

MAINTENANCE CE MARK

LED INCL. DRIVER

EXCL. 5SDCM 30.000

hours LIFETIME LED

INDOOR PROFILE NOT

INCL.

DEGREE BEAM

ANGLE

-20°C ˜

60°C

ENVIRON.

TEMPERATURE

120°

*TUNABLE WHITE LED Cutting size Colour LED Kelvin Lumen/meter LED/m Article number

96W | 5000x10mm 50mm Tunable white 2000-5000K 1700 lm/m 120 19.8643.92

IP20

1/3

WWW.MARETTI.COM

2/3

“No rights can be derived from the information provided on this Instruction Manual. Information on the Instruction Manual has been compiled with the utmost care and is updated on a continuous basis. Nevertheless Maretti cannot guarantee that all information is free of errors, complete or fully up to date.”

2/3

Installatie voorbeeld Installation example

Geel= Warm wit

Wit= Koud wit

Bruin= +

Yellow= Warm white

White= Cold white

Brown= +

Input Output

LED Controller

DC+

DC-

Receiver Power

V+

V-

DC+

DC-

V+

Input Output

V+

V-

Power

V-

CH1

CH2

CH3

DC+

DC-

V+

Input Output

V+

V-

Power

V-

CH1

CH2

CH3

POWER SUPPLY

AMPLIFIER

POWER SUPPLY CONTROLLER

TUNABLE

WHITE LED

INSTRUCTIONS

19.8643.92*

Installation instructions:

• Ensure at all times that all power is shut down.

• LED strip is supplied with self-adhesive heat-transporting tape. To bond this LED tape, the surface must be clean and free of grease.

• It’s important to provide sufcient cooling and air circulation. Mounting on an aluminum strip or heat conductive material is necessary. (The LED strip must

be mounted on an aluminum prole due to heat dissipation.). Don’t forget to peel off the tape backing so you can stick the LED trip on an aluminium prole.

• To prevent short circuit the LED strip can only be shortened at the indicated cutting lines, and if cut there it needs to be insulated. Also after soldering the

strip, it needs to be insulated.

• LED strip can be bent only once and NOT on the places where the electronic components are located.

• The LED strip can only be soldered to the appropriate contact parts, besides the cutting lines.

• Maximum soldering temperature is 273 degrees Celsius. MAXIMUM duration of heating is 8 seconds.

Additional cautions:

• The electronic components on the LED strip should NOT be burdened or clamped in any mechanical way.

• Make sure that the LED strip is NOT damaged or obstructed during assembly.

• LED strip may only be connected in parallel; series connection can cause an asymmetric voltage distribution on the module, thereby providing an overload,

which may lead to a malfunction.

• The power source must have sufcient power for the connected LED strip.

• Installation must be carried out according to the ESD standards (Electrostatic Discharge). Not working according to these standards may cause a malfunc-

tion in the LED strip.

• When installing into damp, dusty and dirty mounting spaces, adequate measures should be taken to make sure these circumstances don’t affect the LED

strip.

• Protective and insulating materials that are used in assembly should have a good light transmission, be UV-stable and be resistant to changes in tempe-

rature and atmospheric corrosive conditions.

• LED strip should only be installed by trained personnel, executing the installation of the LED strip in accordance with the applicable directives and standards.

• Cleaning and maintenance of the LED strip is only allowed with dry cloth and NEVER with liquid and/or abrasives. If the LED strip does get wet or damp,

immediately disconnect the power of the LED strip and dry all components.

Maretti Project Lighting BV. is not liable for any damage caused by misuse or incorrect installation of the LED strip. Also the warranty will be invalid if any

of these points are not respected.

Montage instructies:

• Zorg te allen tijde dat alle spanning is afgesloten.

• LED strip is voorzien van zelfklevende warmte transporterende tape. Om deze LED tape te kunnen verlijmen moet de ondergrond goed schoon en vetvrij zijn.

• Er moet voldoende koeling en luchtcirculatie aanwezig zijn, het monteren op een aluminium strip of warmtegeleidend materiaal is noodzakelijk. (De led strip moet op een

aluminium proel gemonteerd worden i.v.m. warmte afvoer.). Haal A.U.B. het papier van de plakband eraf om de LED strip op een aluminium proel te kunnen plakken.

• De LED strip is in te korten maar alleen op de aangegeven kniplijn, dit ter voorkoming van kortsluiting. Na het inkorten dient deze dan wel geïsoleerd te worden. Dit

geldt ook na solderen van de strip.

• LED strip mag eenmalig gebogen worden, echter NIET op de plekken waar de elektronica componenten zich bevinden.

• De LED strip mag enkel gesoldeerd worden op de daarvoor bestemde contactdelen, naast de inkortposities.

• Maximale soldeertemperatuur is 273 graden Celsius. De MAXIMALE verhittingstijd is 8 seconden.

Extra attentiepunten:

• De elektronicacomponenten op de LED strip mogen mechanisch NIET belast of afgeklemd worden.

• Let op dat de LED strip bij montage NIET beschadigd of onderbroken wordt.

• LED strip mag alleen parallel geschakeld worden; serieschakeling kan een asymmetrische spanningsverdeling op de module veroorzaken, waardoor er overbelasting

ontstaat die kan leiden tot een defect.

• De voedingsbron dient van voldoende vermogen te zijn voor de aangesloten LED strip.

• Montage dient te geschieden volgens de ESD normen (Elektrostatische Ontlading). Bij het niet in acht nemen van deze normen kan er een defect ontstaan in de LED strip.

• Bij montage in vochtige, stofge en vuile inbouw gelegenheden dient er voldoende maatregelen genomen te worden om eventuele inwerking hiervan op de LED strip

tegen te gaan.

• Beschermende en isolerende materialen die toegepast worden bij montage dienen een goede lichttransmissie te hebben, UV-stabiel te zijn, bestand te zijn tegen tem-

peratuurschommelingen en tegen corrosieve atmosferische omstandigheden.

• LED strip dient uitsluitend gemonteerd te worden door elektrisch geschoold personeel, die de installatie van de LED strip volgens de daartoe geldende richtlijnen en

normen uitvoert.

• Reiniging en onderhoud van de LED strip mag alleen met droge doek en NOOIT met vloeibare en/of schuurmiddelen. Als het toch nat/vochtig is geworden dan direct de

installatie spanningloos maken en alles droog maken.

Maretti Projectverlichting BV. is niet aansprakelijk voor enige schade, ontstaan door foutief gebruik of verkeerde installatie van de LED strip. Tevens vervalt de garantie als

een van deze punten niet wordt nageleefd.

Note: Profiles, opal covers and end caps are ordered separately. Opmerking: De accessoires zijn apart te bestellen.

The LED strip must be mounted on an aluminum profile due to heat dissipation.

Peel off the tape backing so you can stick the LED strip on an aluminium profile.

De led strip moet op een aluminium profiel gemonteerd worden i.v.m. warmte afvoer.

Haal het papier van de plakband eraf om de LED strip op een aluminium profiel te kunnen plakken.

Note: First degrease the profile

before placing the LED strip

LED strip

Double-sided tape for affixing the strip

Peel off the tape backing

Close-up profile

Note: First degrease the profile

before placing the LED strip

Opal cover 2M on

the aluminium profile

19.7342.05.A

Opal cover 3M

19.7347.05

Opal cover 2M

19.7346.05

Mounting clip

19.7353.17.A

LED strip

Peel off the tape backing

End cap

19.7354.07.A

Aluminium profile 2M

19.7348.14

Black profile 2M

19.7348.04

Aluminium profile 3M

19.7350.14.A

Black profile 3M

19.7350.04.A

Aluminium profile 2M

19.7340.14.A

! !

Note: First degrease the profile

before placing the LED strip

LED strip

Double-sided tape for affixing the strip

Peel off the tape backing

Close-up profile

Note: First degrease the profile

before placing the LED strip

Opal cover 2M on

the aluminium profile

19.7342.05.A

Opal cover 3M

19.7347.05

Opal cover 2M

19.7346.05

Mounting clip

19.7353.17.A

LED strip

Peel off the tape backing

End cap

19.7354.07.A

Aluminium profile 2M

19.7348.14

Black profile 2M

19.7348.04

Aluminium profile 3M

19.7350.14.A

Black profile 3M

19.7350.04.A

Aluminium profile 2M

19.7340.14.A

! !

Note: First degrease the profile

before placing the LED strip

LED strip

Double-sided tape for affixing the strip

Peel off the tape backing

Close-up profile

Note: First degrease the profile

before placing the LED strip

Opal cover 2M on

the aluminium profile

19.7342.05.A

Opal cover 3M

19.7347.05

Opal cover 2M

19.7346.05

Mounting clip

19.7353.17.A

LED strip

Peel off the tape backing

End cap

19.7354.07.A

Aluminium profile 2M

19.7348.14

Black profile 2M

19.7348.04

Aluminium profile 3M

19.7350.14.A

Black profile 3M

19.7350.04.A

Aluminium profile 2M

19.7340.14.A

! !

Note: First degrease the profile

before placing the LED strip

LED strip

Double-sided tape for affixing the strip

Peel off the tape backing

Close-up profile

Note: First degrease the profile

before placing the LED strip

Opal cover 2M on

the aluminium profile

19.7342.05.A

Opal cover 3M

19.7347.05

Opal cover 2M

19.7346.05

Mounting clip

19.7353.17.A

LED strip

Peel off the tape backing

End cap

19.7354.07.A

Aluminium profile 2M

19.7348.14

Black profile 2M

19.7348.04

Aluminium profile 3M

19.7350.14.A

Black profile 3M

19.7350.04.A

Aluminium profile 2M

19.7340.14.A

! !

Note: First degrease the profile

before placing the LED strip

LED strip

Double-sided tape for affixing the strip

Peel off the tape backing

Close-up profile

Note: First degrease the profile

before placing the LED strip

Opal cover 2M on

the aluminium profile

19.7342.05.A

Opal cover 3M

19.7347.05

Opal cover 2M

19.7346.05

Mounting clip

19.7353.17.A

LED strip

Peel off the tape backing

End cap

19.7354.07.A

Aluminium profile 2M

19.7348.14

Black profile 2M

19.7348.04

Aluminium profile 3M

19.7350.14.A

Black profile 3M

19.7350.04.A

Aluminium profile 2M

19.7340.14.A

! !

Note: First degrease the profile

before placing the LED strip

LED strip

Double-sided tape for affixing the strip

Peel off the tape backing

Close-up profile

Note: First degrease the profile

before placing the LED strip

Opal cover 2M on

the aluminium profile

19.7342.05.A

Opal cover 3M

19.7347.05

Opal cover 2M

19.7346.05

Mounting clip

19.7353.17.A

LED strip

Peel off the tape backing

End cap

19.7354.07.A

Aluminium profile 2M

19.7348.14

Black profile 2M

19.7348.04

Aluminium profile 3M

19.7350.14.A

Black profile 3M

19.7350.04.A

Aluminium profile 2M

19.7340.14.A

! !

Square opal cover

19.7345.05

Round opal cover

19.7342.05.A

DRIVERS: APART VERKRIJGBAAR / SEPARATE ORDER

ART. NR. NAME

16.9001.2405. GWZDRIVER DALI 24VDC 50W TW (DT8)

16.9001.2416. GWZDRIVER DALI 24VDC 50W TW (DT8)

G: 2m GST18 5P

W: 2m Winsta 5P

Z: 2m excl. prim. Connector

APART VERKRIJGBAAR /

SEPARATE ORDER

ART. NR.: 20.0025.07

ROTARY DIMMER SWITCH

DALI DT8 TBV TUNABLE WHITE

WWW.MARETTI.COM

3/3

R>=50mm

De plek voor de LED-strip moet vetvrij,

droog, vlak en glad zijn voordat u

de LED-strips aanbrengt.

LED-strip kan alleen op de stippellijnen

tussen soldeerpads worden geknipt.

The place for the LED strip should

be fat-free, dry, flat and smooth

before applying the LED strips.

LED-strips kunnen niet worden

gebogen of gedraaid in

de gedemonstreerde richtingen.

LED strips can not be bent

or twisted in the demonstrated directions.

LED strip can only be cut on

the dotted linesbetween solder pads.

Soldeer draden op soldeer pads (label +/-).

De soldeertemperatuur mag niet hoger

zijn dan 350°C voor een maximale duur

van max. 3 seconden.

Solder wires on solder pads (label +/-).

The soldering temperature must not

exceed 350°C for a maximum duration

of max. 3 seconds.

LED-strips zijn buigbaar.

Max. buigradius is 30mm.

LED strips are bendable.

Max. bending radius is 30mm.

When install the LED strip, please note the installation technique. The LED strip can be bent, but not distorted, as shown below:

Let bij het plaatsen van de ledstrip op de installatietechniek. De ledstrip kan worden gebogen, maar niet vervormd, zoals hieronder weergegeven:

CAUTIONS

- LED strips are low voltage products, you must use a power supply (transformer).

- Please do not connect the LED strip directly to the AC 110V or AC 220V,

otherwise it will burn out the LED strips.

- LED-strips zijn laagspanningsproducten, u moet een voeding (transformator) gebruiken.

- Sluit de ledstrip a.u.b. niet rechtstreeks aan op AC 110V of AC 220V,

anders zullen de ledstrips doorbranden

- Clean up the installation surface, it will ensure the reliability of the adhesive.

-The electrical connection process must be operated by a professional person.

- Reinig het installatieoppervlak, dit zorgt voor de betrouwbaarheid van de lijm.

- Het elektrische aansluitproces moet worden uitgevoerd door een professionele persoon.

30mm

3 4 5 6

Verwijder het plakband op de

achterkant van de LED-strip tijdens

het vastplakken van de LED-strip

Remove the adhesive tape on

the back side of the LED strip.

Buigende diameter

Bending diameter

Druk voorzichtig op de LED-strip tussen

elektronische componenten.

Druk niet op elektronische componenten.

Press the LED strip gently between electronic

components to stick it to the surface.

Avoid pressing electronic components.

LED-strips moeten worden geïnstalleerd op aluminium (of materiaal met vergelijkbare

thermische geleiding) om te voorkomen dat LED’s oververhit raken en zorgen voor een

goede warmteafvoer. Meet deTC-temperatuur na 30 min. tijdens gebruik. DeTC-temperatuur

mag niet hoger zijn dan 75°C.

LED strips must be installed on aluminum (or material with comparable thermal

conductivity) to prevent LEDs from overheatingand ensure proper heat dissipation.

Measure theTC temperatureafter 30 min. during use.TheTC temperature

should not exceed 75°C.

< 75°C

Houd de LED-strip op de haspel terwijl u

deze op het oppervlak aanbrengt. Verwijder

het plakband en breng de tape aan terwijl

u de haspel tegelijkertijd uitrolt.

Keep the LED strip on the reel while you

apply it to the surface. Remove the adhesive

tape and applythe tape while unrolling

the reel at the same time.

UIT

OFF

Schakel altijd eerst de stroom uit

voordat u installatie-, onderhoud of

reparatie-werkzaamheden uitvoert.

Always switch off the mains voltage

before carrying out installation,

maintenance and repair work.

TUNABLE WHITE LED

INSTRUCTIONS

19.8643.92*

Cutting size, see page 1

Knipafstand, zie pagina 1

Altri manuali Maretti Apparecchio di illuminazione

Maretti

Maretti 19.8617.35 Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente