Marmitek BOOMBOOM 430 Manuale utente
BOOM
B
OOM 43
0
20623/20140404 • BOOMBOOM 430
ALL RIGHTS RESERVED MARMITEK ©
USER MANUAL 3
GEBRAUCHSANLEITUNG 13
GUIDE UTILISATEUR 23
MODO DE EMPLEO 33
MANUALE D’ISTRUZIONI 43
GEBRUIKSAANWIJZING 53
BOOMBOOM 430
© MARMITEK
2
BOOMBOOM 430
3
ENGLISH
SAFETY WARNINGS
xTo prevent short circuits, this product should only be
used inside and only in dry spaces. Do not expose the
components to rain or moisture. Do not use the product
close to a bath, swimming pool, etc.
xDo not expose the components of your system to
extremely high temperatures or bright light sources.
xIn case of improper usage or if you have altered and
repaired the product yourself, all guarantees expire.
Marmitek does not accept responsibility in the case of
improper usage of the product or when the product is
used for purposes other than specified. Marmitek does
not accept responsibility for additional damage other than
what is covered by the legal product responsibility.
xThis product is not a toy. Keep out of reach of children.
xAvoid using headphones/speakers with the volume
turned up for an extended period of time. Doing so may
damage your hearing. It is advisable to keep the volume
at a moderate level at all times.
xDo not open the product: the device may contain live
parts. The product should only be repaired or serviced by
a qualified expert.
xOnly connect the adapter to the mains after checking
whether the mains voltage is the same as the values on
the identification tags. Never connect an adapter or
power cord when it is damaged. In that case, contact
your supplier.
xDisconnect the AC/DC Power Adapter from the mains,
when this device is not in use for a prolonged period of
time.
© MARMITEK
4
TABLE OF CONTENTS
SAFETY WARNINGS.............................................................. 3
TABLE OF CONTENTS .......................................................... 4
INTRODUCTION..................................................................... 5
SET CONTENTS..................................................................... 5
ATTACHING THE ANTENNA ................................................. 6
CONNECTING YOUR SPEAKERS ........................................ 7
CONNECTING THE POWER ADAPTER ...............................8
PAIRING AND CONNECTING................................................ 9
RECONNECTING TO THE AMPLIFIER.................................9
FREQUENTLY ASKED QUESTIONS................................... 10
TECHNICAL DATA ............................................................... 11
COPYRIGHTS....................................................................... 12
BOOMBOOM 430
5
ENGLISH
INTRODUCTION
Congratulations on your purchase of the Marmitek
BoomBoom 430. This amplifier contains advanced audio
amplification technology which provides the audio quality of
analogue amplifiers at a superior signal-to-noise ratio and low
audio distortion while at the same time offering an extremely
small size and high power efficiency. This Bluetooth audio
device with built-in amplifier allows you to play music from a
sound source that is equipped with Bluetooth technology on
your passive speakers without having to connect the source
using cables. This could involve a PC or a laptop that has a
Bluetooth USB dongle, a mobile telephone that supports
Bluetooth, an Android telephone, an Android Tablet, an
iPhone an iPad or a Mac.
You can then organise your music via the sound source
without having to walk over to the sound system.
The BoomBoom 430 has sufficient range, allowing you to
organise your music in the same or in an adjoining room.
•Stream your music via Bluetooth to your passive
speakers.
•Listen to music or internet radio from your smartphone or
(tablet) PC on your passive speakers (wirelessly).
•Suitable for all Bluetooth® enabled sound sources such
as iPhone, Android phone, iPad, etc.
SET CONTENTS
1 x BoomBoom 430, universal Bluetooth wireless stereo
audio amplifier
1 x Power adapter
1 x Antenna
1 x Set of instructions in English, German, French, Spanish,
Italian, Dutch.
© MARMITEK
6
ATTACHING THE ANTENNA
Antenna
The antenna can swivel to other angles.
Turn the cap
clockwise to
fasten the antenna
BOOMBOOM 430
7
ENGLISH
CONNECTING YOUR SPEAKERS
The BoomBoom 430 connects to regular passive
loudspeakers via regular speaker cables (not included).
Observe the correct polarity when connecting the speakers.
© MARMITEK
8
CONNECTING THE POWER ADAPTER
•Turn the amplifier volume control to minimum prior to
connecting or disconnecting the amplifier as this may
cause loud clicks which can damage your speakers.
•Connect the AC adapter with the amplifier BEFORE
plugging the AC adapter into an outlet to avoid spark
generation!
BOOMBOOM 430
9
ENGLISH
PAIRING AND CONNECTING
The Bluetooth amplifier must be paired with your Bluetooth-
enabled device in order to be able to stream audio. To pair the
amplifier, power up the amplifier. Then go to the wireless
settings of your Bluetooth device and select "Scan for
Bluetooth devices". If in Windows, select "Add New Device" in
the Bluetooth tab.
Once the amplifier is shown as a headset with the name
"BoomBoom 430", confirm the pairing on your device. Next
your Bluetooth device will automatically connect to the
amplifier. If it doesn‘t, manually select "Connect". If streaming
from Windows, note that Windows will install drivers during the
pairing. Manually connect to the amplifier by right-clicking the
headset symbol and selecting "Connect" if Windows does not
connect automatically.
After the pairing is complete, the status LED will be on and
audio can be streamed to the amplifier from your device.
RECONNECTING TO THE AMPLIFIER
If the amplifier or your device is switched off, the connection
will be dropped. When the amplifier is switched back on, you
can manually reconnect to the amplifier by revisiting the
Bluetooth settings of your device. Then simply select the
amplifier and select “Connect". The audio streaming will
resume. In Windows, right-click the headset symbol and select
"Connect".
© MARMITEK
10
FREQUENTLY ASKED QUESTIONS
No Sound
xEnsure the AC adaptor is fully inserted into the AC outlet
and the power connection input on the BoomBoom 430.
xEnsure the BoomBoom 430 and Bluetooth device has
been paired up.
xThe volume of the BoomBoom 430 is too low. Adjust the
volume to an appropriate level.
Distorted sound
xEnsure the volume level of the BoomBoom 430 is
adjusted properly.
xThe BoomBoom 430 is too far away from the Bluetooth
device. Move them closer together.
Do you have other questions that have not been resolved by
the above information?
Please go to www.marmitek.com
Indice
Lingue:
Altri manuali Marmitek Amplificatore
