Marmitek MegaView 63 Manuale utente

MegaView 63

20678/20181206 • MegaView 63TM

USER MANUAL 3

GEBRAUCHSANLEITUNG

GUIDE UTILISATEUR

MODO DE EMPLEO

MANUALE D’ISTRUZIONI

GEBRUIKSAANWIJZING

MegaView 63

_voorkant_20678_20181206_UG_103x145mm_80g_MegaView_63.pdf 1 21-12-2018 10:27:02

MegaView 63™

ENGLISH

1 Table of contents

1 Table of contents ..................................................................3

2 Safety instructions.................................................................4

3 Your product .........................................................................4

3.1 Introduction...........................................................................4

3.2 Benefits.................................................................................5

3.3 Package contents .................................................................5

4 Getting started ......................................................................6

4.1 Installation tips......................................................................6

4.2 Requirements CAT5e/6 cable ...............................................6

4.3 Installing the transmitter and receiver....................................6

4.4 Setting signal strength (equalizer).........................................7

4.5 Installing Power over Cable (POC)........................................8

5 Usage ...................................................................................8

6 Technical specifications ........................................................9

7 Frequently asked questions (FAQs) ....................................10

8 Notification..........................................................................11

8.1 Declaration of Conformity....................................................11

8.2 Recycling............................................................................11

8.3 Copyrights ..........................................................................12

2 Safety instructions

Please read these instructions thoroughly before you use the

device and keep them for future reference.

•Only for indoor use.

•Do not use the product in a damp environment or near water.

•Do not expose the product to extremely high or low

temperatures, strong light sources or direct sunlight.

•This product is not a toy. Keep out of reach of children.

•Never open the product: the device may contain parts with

deadly voltage.

•Repairs or service should only be performed by qualified

personnel.

•Improper use, self-installed modifications or repairs will void

any and all warranties.

•Marmitek does not accept any product responsibility for

incorrect use of the product or use other than for which the

product is intended.

•Marmitek does not accept liability for any consequential

damage other than the legal product responsibility.

3 Your product

3.1 Introduction

Congratulations on your purchase of the Marmitek MegaView

63™. The MegaView 63™ provides a simple way to extend an

HDMI or DVI signal over a single networking cable. Extend your

HDMI cable up to 40 metres over a single networking cable!

Supports 1080p Full HD and 3D resolutions, without compression!

Watch TV programmes or films and view photos from, for

example, your digital TV decoder, media center PC or Blu-ray

player anywhere in your home on your TV or projector, in HD

quality. All our products are designed and manufactured to the

highest quality requirements.

MegaView 63™

ENGLISH

3.2 Benefits

•Supports 1080p Full HD and 3D resolutions, without

compression.

•Built-in Power over Cable (PoC) technology eliminates the

need for a power socket for the MegaView receiver near the

TV. (MV241)

•The MegaView transmitter is USB powered via the connected

HDMI source.

•Supports HDCP and is fully compatible with all HDMI

versions.

3.3 Package contents

1 x transmitter (HD transmitter)

1 x receiver (HD receiver)

1 x Micro USB-to-USB cable

1 x user manual

4 Getting started

4.1 Installation tips

•First, switch off all devices (TV and HDMI sources) before

connecting them to the MegaView 63™. If a device cannot be

turned off, please remove its plug from the wall socket.

•For the best picture and sound quality, only use High Speed

HDMI® certified cables.

•Please be careful when connecting your HDMI cables. These

can damage easily.

4.2 Requirements CAT5e/6 cable

•UTP, FTP or STP cable

•24AWG or lower

•Solid twisted pair

•100 ohm at 1 MHz

•RJ-45 connection according to EIA/TIA T568B standard

Please note! The CAT6 cable has better specifications than the

CAT5e, often making it possible to work with longer cable lengths.

To optimise transmission quality, use solid twisted pair CAT5e or

CAT6 cables.

4.3 Installing the transmitter and receiver

1. CAT5e/6

2. HDMI input

3. 5V DC micro USB power

4. Signal strength (equalizer)

5. HDMI output

In order to check proper functioning of the system, it is advisable

to test the set-up first using a short CAT5e/6 cable length.

transmitter receiver

1 1

2 3 5

MegaView 63™

ENGLISH

1. Switch off all devices prior to installation.

2. Connect the HDMI source (Blu-ray disc player, TV decoder,

media center PC, etc.) to the transmitter [2] using an HDMI

cable (not included).

3. Connect the receiver [5] to your TV or projector using an

HDMI cable (not included).

4. Use one CAT5e/6 networking cable to connect the

transmitter and receiver [1].

Please note! The MegaView 63™ will only work when using a

direct connection between the transmitter and the receiver and

cannot be connected to an existing home network (LAN), since

this may damage the device or your network router.

5. Connect the micro USB power cable [3] to the transmitter's

"Power" jack and use a free USB port on another device to

power the transmitter.

Please note! Do not place the transmitter or receiver in an

enclosed space such as a TV cabinet or equivalent. Provide

adequate ventilation to ensure that the product is functioning

properly and to protect against overheating.

4.4 Setting signal strength (equalizer)

With the MegaView 63™, you can adjust the signal strength

manually, using the ''EQ'' switch [4]. This function uses 2 positions

related to the length of the CAT5e/6 cables used.

1. With the switch in the right

position, you can use a CAT5e/6

cable of between 0.5 and 20

metres.

2. With the switch in the left

position, you can use a CAT5e/6

cable of between 20 and 40 metres.

4.5 Installing Power over Cable (POC)

The MegaView 63™ supports bi-directional Power over Cable

technology, making it easy to provide the transmitter and receiver

with supply voltage from a single point. This eliminates the need

for a power connection for the receiver near the TV. The

transmitter provides power to the receiver using the CAT5e/6

cable. This built-in technology allows you to place the receiver out

of sight behind your TV, without the need for a power outlet.

5 Usage

1. Switch on the HDMI source (for example, a TV decoder or

multimedia PC).

2. Switch on the TV or projector and select the appropriate

input. This is usually done by pressing the A/V or EXT button

on your remote control.

3. You will immediately receive images from the connected

HDMI source.

MegaView 63™

ENGLISH

6 Technical specifications

Video

Video resolution Max. 1080p@60Hz

HDMI standard HDMI 1.4, EDID, DVI, all

3D formats

HDCP standards HDCP 1.4

Colour formats RGB and YCbCr 4:4:4

Colour depth 24-bit

Data transfer Without compression

Video bandwidth 4.95 Gbps

Clock frequency 165MHz

Audio

Audio formats DTS-HD Master Audio,

Dolby TrueHD, Dolby

Digital/AC3, DTS 5.1 and

PCM stereo

Transmitter

AV input 1 x HDMI input

UTP/CATx connection RJ45, EIA/TIA T568B

Dimensions (H x W x D) 16 x 63 x 37 mm

Weight 20 g

Receiver

AV output 1 x HDMI output

UTP/CATx connection RJ45, EIA/TIA T568B

Dimensions (H x W x D) 16 x 63 x 37 mm

Weight 20 g

Cable length

CAT5e/6 cable Max. 40m@1080p

HDMI cable Max. 10 metres

General

Ambient temperature 0 to +40° C

Ambient humidity 20% to 90%

Power supply 5 VDC / 1A micro USB

Power supply technology Power over cable (POC)

Specifications may change without prior notice.

7 Frequently asked questions (FAQs)

No (or poor) image and sound

If you experience poor or no picture after connecting the

MegaView 63™, try detecting the problem by connecting the

devices to your TV or projector one at a time. This enables you to

determine whether the problem is in the HDMI sources, the HDMI

cables, the MegaView 63™ or the TV.

•Ensure that the micro USB power cable is connected to a

free USB port of another device.

•For the best picture and sound quality, only use High Speed

HDMI® certified cables.

•Do not use HDMI cables longer than those specified in the

technical data.

•Check the HDMI cables and/or connectors for damage.

•Both the HDMI source and your TV or projector should fully

support HDMI.

No (or poor) image and sound

•Is the equalizer switch (EQ) in the correct position, as

specified in section 4.4?

•Ensure that the HDMI source is switched on.

•Only use CAT5e/6 cables, as specified in section 4.2.

•Ensure that the CAT5e/6 cable is connected well (no

breakages).

•Make sure that the maximum cable length is not exceeded.

•Prevent installing your system close to RF sources (wireless

devices) as much as possible.

•Set your HDMI source to a lower resolution, the CAT5e/6

cable used may not be able to handle the bandwidth of

higher resolutions.

Do you have any questions that are not answered here? Please

check www.marmitek.com

Indice

Lingue:

Altri manuali Marmitek Estensione

Marmitek

Marmitek MegaView 67 Pro Manuale utente

Marmitek

Marmitek MegaView61 Manuale utente

Marmitek

Marmitek MegaView 65 Manuale utente

Marmitek

Marmitek IR 100 USB Manuale utente

Marmitek

Marmitek GIGAVIEW810 Manuale utente

Marmitek

Marmitek Powermid XS Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Marmitek

Marmitek IR Control 10 Manuale utente

Marmitek

Marmitek MegaView50 Manuale utente

Marmitek

Marmitek IR CONTROL 8 Manuale utente

Marmitek

Marmitek MegaView 91 Manuale utente

Marmitek

Marmitek IR CONTROL PRO 8 Manuale utente

Marmitek

Marmitek POWERMID XL Manuale utente

Marmitek

Marmitek Megaview 80 Manuale utente

Marmitek

Marmitek POWERMID XL Manuale di istruzioni

Marmitek

Marmitek MegaView 251 Pro Manuale utente

Marmitek

Marmitek IR Eye Manuale utente

Marmitek

Marmitek IR 100 USB Manuale utente

Marmitek

Marmitek VideoControl3 Manuale di istruzioni

Marmitek

Marmitek MegaView 121 Manuale utente

Marmitek

Marmitek GIGAVIEW 820 Manuale utente

Marmitek

Marmitek GigaVideo 580 Manuale di istruzioni

Marmitek

Marmitek VideoControl3 Manuale utente

Marmitek

Marmitek IR Control 10 XTRA Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manuale utente