Marshall Electronics VS-570-HDSDI Manuale utente
User Manual ver.1.0
VS-570-HDSDI
2.0 Megapixel Speed Dome
v1.0 10062010570
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
2/54
Safety Precaution
Make sure to turn off the power before installing VS-570-HDSDI.
Do not install under the direct sunlight or in dusty areas.
Make sure to use the product within the temperature and humidity specified in the specification.
Do not operate the product in the presence of vibrations or strong magnetic fields.
Do not put electrically conducting materials in the ventilation hole.
Do not open the top cover of the product. It may cause a failure or electric shock on the
components.
To prevent from overheating, make sure to keep the distance at least 10cm from the ventilation
hole.
Make sure of proper voltage (220V/100V) before connecting the power.
We appreciate your purchasing VS-570-HDSDI.
Before installing the product, please read the following with care.
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
3/54
Table of Content
1. Introduction ................................................................................................................................. 4
About this manual ..................................................................................................................... 4
Features ................................................................................................................................... 4
Product and Accessories .......................................................................................................... 7
Part Names and Functions ....................................................................................................... 8
System Connections ................................................................................................................. 9
2. Installation ................................................................................................................................. 12
DIP Switch Setup .................................................................................................................... 12
Installation Camera with Brackets ........................................................................................... 14
Wiring/Cabling & Connecting .................................................................................................. 16
Check if it works ..................................................................................................................... 19
3. System Operation ..................................................................................................................... 20
Remote Video Monitoring ....................................................................................................... 20
Initialization of IP address ....................................................................................................... 23
4. Remote Configuration ............................................................................................................... 24
Using Web Brower .................................................................................................................. 24
System Configuration ............................................................................................................. 25
Video Configuration ................................................................................................................ 29
Audio Configuration ................................................................................................................ 34
Network Configuration ............................................................................................................ 35
Serial Configuration ................................................................................................................ 40
Event Configuration ................................................................................................................ 42
PTZ Configuration .................................................................................................................. 45
Record Configuration .............................................................................................................. 49
User Configuration .................................................................................................................. 50
Camera Configuration ............................................................................................................ 52
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
4/54
1. Introduction
About this manual
This User Manual provides information on operating and managing the premium network camera, VS-570-
HDSDI. The Manual includes instructions of installation, operation and configuration of VS-570-HDSDI
troubleshooting tips.
Features
VS-570-HDSDI is a 2.0M PTZ network-based camera with remote live monitoring, audio monitoring and
control via an IP network such as LAN, ADSL/VDSL, and Wireless LAN.
Camera
•1/3” 2Megapixel CMOS Image Sensor
•X10 optical zoom, x12 digital zoom
•True Day & Night (ICR)
Video
•Highly efficient compression algorithm, H.264 & MJPEG support
•18 kinds of compression and resolutions: CIF (352x240) - Full HD (1920x1080)
•Wide range of transmission rates: 32kbps ~ 8Mbps
•Various transmission modes: CBR, VBR
•Motion detection
•Composite video output
•HD-SDI video output (Option)
Audio
•Multi-transmission mode: Simplex (VS-570-HDSDI Client PC or Decoder, Client PC or
Decoder VS-570-HDSDI), Full Duplex
Network
•Fixed IP & Dynamic IP (DHCP) support
•1:1, 1:N support
•Multicasting
•Various types of Protocol support: TCP/IP, UDP, Multicast, DHCP, SMTP, HTTP, SNMP, RTP,
RTSP
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
5/54
Serial Data
•RS-485 support:
•Data pass-through mode: Serial data communication between VS-570-HDSDI and Decoder.
Sensor and Alarm
•Supports direct connections of external sensor and alarm devices.
•Event Alarm notification.
•2 alarm sensor Inputs and 2 alarm Output relays are available.
•If an external sensor is activated, camera can be set to move to the corresponding Preset
position.
User Interface
•Diagnose and upgrade a through dedicated program called True Manager.
•System configuration using Internet Explorer
High Reliability
•Reliable embedded system.
Powerful Pan/Tilt Functions
•Max. 360/sec high speed Pan/Tilt Motion.
•Using Vector Drive Technology, Pan/Tilt motions are accomplished in the shortest path.
As a result, the time to target view is reduced dramatically and the video on the monitor is very
stable.
•When using a PTZ controller, the ultra slow speed of 0.05/sec is usefull for accurately moving
the camera to a desired view. Additionally, the zoom-proportional pan/tilt movement improves
the ability to follow a moving object.
Preset, Pattern, Swing, Group
•MAX. 128 Presets are assignable and characteristics of each preset can be set up
independently.
•Max. 8 sets of Swing action can be stored. This enables you to move the camera repetitively
between two preset positions with a designated speed.
•Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow
any trajectory operated by a joystick as closely as possible.
•Max. 8 sets of Group actions can be stored. This enables you to move camera repetitively
with a combination of Preset or Pattern or Swing. A Group is composed of a maximum
of 20 entities of Preset/Pattern/Swings.
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
6/54
PTZ(Pan/Tilt/Zoom) Control
•With RS-485 communication, a maximum of 255 cameras can be controlled at the same time.
•Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of
firmware.
Easy Installation and Perfect Outdoor Environment Compatibility
•Fans and heaters are built into the camera enclosure for both hot and cold temperature
environments. Advanced mechanical design protects the camera from damaging water and dust.
•It is easy to install and maintain the camera with a cable channel built into the mountin brackets.
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
7/54
Product and Accessories
Note: Mount Brackets are optional.
Wall Mount Bracket
Ceiling Mount Bracket
[Screws : Torx Screw M418, Hex Lag #1450]
[Screws : Torx Screw M418, Anchor Bolt 3/8"70]
Main body & Dome Cover
Accessories
Main Cable Wrench Driver 2EA of BNC
Cross LAN Cable Audio Cable CD
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
8/54
Part Names and Functions
•Dome Cover
To protect the dome cover from scratches or dust Do Not Remove the
protective vinyl from the dome before completing the installation process.
•DIP Switch
Sets up camera ID and protocol.
•Drop Prevention
Spring
This prevents the camera from dropping during installation and
maintenance. After installing the Bracket, please connect the spring to
the drop prevention hook of main body as shown in picture.
•Mounting Screw
Hole
This hole is for screws that attach the main body to the mounting
bracket.
•IP Reset Switch
Reset the network configuration to the factory defaults. You will lose
all the data that had been previously entered . To initialize the system
to the factory default, press the reset button and hold for more
than 5 seconds.
•LAN Port
This is used for the Ethernet connection.
•Audio Port
This is used for the audio in/out connection.
•Video (BNC)
This is used for the HD-SDI video out.
•Main Connector
This is used for connecting to the power wire, the RS-485
communication cable, and the alarm in/out connection cable.
①
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
9/54
System Connections
VS-570-HDSDI IP Cameras can be connected in either 1 to 1 connection where one VS-570-HDSDI
is connected to one PC client or a decoder system or, 1 to many connections where one VS-570-
HDSDI can be connected to several PCs and decoder systems. The VS-101 video server can work as a
video decoder which takes the data from a video server or IP camera, decodes and outputs analog
or digital video, HDMI and HDSDI.
Topology
Generally, the VS-570-HDSDI and PC or a decoder is connected in 1-to-1 mode or 1-to many configuration.
1:1 Connection .
One VS-570-HDSDI is installed at a site where video images are transmitted. A PC or a decoder is
installed at a central location to receive and view the video images on an analog monitor. Audio and
serial data are transferred in either direction.
Site
Remote Center (Decoder)
Remote Center
Site
Remote Center (PC SW)
VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
10/54
or
or
or
1:N Connection .
In this configuration, a site can be monitored from many remote central locations. Although up to 64 PCs
or decoders can be connected to one VS-570-HDSDI, in the real network environment, network
bandwidth can limit the maximum connections. Functionally, the central monitoring system (CMS)
software provided can replace the decoder.
Multicast Mode
If the network supports multicasting, a large number of decoders can be used to receive video effectively
from a VS-570-HDSDI using a single streaming of video and audio. However, multicast mode is
possible only when the network environment supports multicast.
Relay
Video and audio data can be retransmitted from one center to another center. This arrangement is useful
when the network bandwidth to the site is limited and there is more than one center wanting to monitor
the site.
Site
Remote Center
Site
Center 1(Decoder)
Center 2 (Decoder)
Indice
Altri manuali Marshall Electronics Telecamera di sicurezza
Marshall Electronics
Marshall Electronics VS-WM202-HDSDI Manuale utente
Marshall Electronics
Marshall Electronics CV620-WH Manuale utente
Marshall Electronics
Marshall Electronics CV620-BK2 Manuale utente
Marshall Electronics
Marshall Electronics CV620-WH4 Manuale utente
Marshall Electronics
Marshall Electronics CV-340-CS Manuale utente
Marshall Electronics
Marshall Electronics CV612HT-4K Manuale utente
Marshall Electronics
Marshall Electronics CV610-U2 Manuale utente
Marshall Electronics
Marshall Electronics VS-5326-3GSDI Manuale utente
Marshall Electronics
Marshall Electronics CV620-BK Manuale utente
Marshall Electronics
Marshall Electronics CV502-WPM Manuale utente
