Marvel M60CSS Manuale
Installation
Operation
and
Maintenance
Instructions
Built In
Side by Side
Refrigerator/Freezer
M60CSS
M72CSS
MPRO42CSS
MPRO48CSS
MPRO60CSS
MPRO72CSS
2
is committed to building a quality product
in an environmentally friendly manner. Our processes are
tightly controlled and closely monitored. We have achieved
certications in ISO 9001 for quality assurance, ISO 14001
for environmental management, and OHSAS 18001 for oc-
cupational health and safety from Lloyd’s Register Quality
Assurance.
NOTE
!CAUTION
Important Safety Instructions
Warnings and safety instructions appearing in this guide
are not meant to cover all possible conditions and situa-
tions that may occur. Common sense, caution, and care
must be exercised when installing, maintaining, or operat-
ing this appliance.
Recognize Safety Symbols,
Words, and Labels.
!WARNING
WARNING-Hazards or unsafe practices with
high probability of personal injury or property / prod-
uct damage.
CAUTION-Hazards or unsafe practices which could
result in personal injury or property or product damage.
NOTE-Important information to help assure a problem
free installation and operation.
CONTENTS
Unpacking the refrigerator/freezer ......................................3
Tools required ..................................................................3
Warranty registration ...........................................................4
Dimensions for M(XX)CSS with Solid Doors .......................5
Dimensions for M(XX)CSS with Solid Overlay Doors ...........6
Dimensions for M(XX)CSS with Solid Freezer Door and Glass
Refrigerator Door ............................................................7
Dimensions for M(XX)CSS with Solid Freezer Overlay Door
and Glass Refrigerator Overlay Door ............................8
Dimensions for MPRO(XX)CSS with Solid Doors .................9
Dimensions for MPRO(XX)CSS with Solid Freezer Door and
Glass Refrigerator Door ................................................10
Preinstallation considerations ............................................11
Rough in opening ..........................................................11
Select location ...............................................................11
Electrical requirements .................................................12
Plumbing requirements .................................................12
Installing the cabinet .........................................................13
Corner installation .........................................................13
Anti tip bracket considerations .......................................14
Leveling the unit ................................................................15
Installing two units side by side ...........................................16
Installing the power module ..............................................17
Placing power module on top of cabinet .........................17
Power module electrical connections .............................17
Installing Ice Maker Water Valve .........................................18
Installing the grille .............................................................19
Custom Grille and Door Overlay Panels ............................22
Mounting Grille Facia Panel .........................................22
Overlay Door Panel Instructions ....................................23
Hinge and gasket adjustments ..........................................25
Installing side panels .........................................................26
Installing the kickplate .......................................................26
Installation checks ............................................................27
Common installation errors ..............................................27
Use and care guide ...........................................................27
Using your refrigerator ....................................................27
Using your freezer ..........................................................28
Temperatures ..................................................................29
Defrosting .......................................................................29
Cleaning .........................................................................29
Condenser cleaning procedure ......................................29
Energy saving tips .............................................................30
Product sounds .................................................................30
Troubleshooting guide ......................................................31
Obtaining service ..............................................................31
Warranty ...........................................................................32
3
!CAUTION
!CAUTION
!WARNING
EXCESSIVE WEIGHT HAZARD
Use two or more people to move product.
Failure to do so can result in back or other injury.
Remove Interior Packaging
Your refrigerator/freezer has been packed for shipment
with all parts that could be damaged by movement securely
fastened. Remove internal packing materials and any tape
holding internal components in place. The owners manual
is shipped inside the product in a plastic bag along with the
warranty registration card, and other accessory items.
Important
Keep your carton and packaging until your refrigerator/
freezer has been thoroughly inspected and found to be in
good condition. If there is damage, the packaging will be
needed as proof of damage in transit. Afterwards please
dispose of all items responsibly in particular the plastic
bags which can be a suffocation hazard.
Note to Customer
This merchandise was carefully packed and thoroughly
inspected before leaving our plant. Responsibility for its
safe delivery was assumed by the retailer upon acceptance
of the shipment. Claims for loss or damage sustained in
transit must be made to the retailer.
DO NOT RETURN DAMAGED MERCHANDISE TO THE
MANUFACTURER - FILE THE CLAIM WITH THE RE-
TAILER.
If the power module was shipped or has been laying on
its side for any period of time allow the power module to
sit upright for a period of at least 24 hours before plugging
in. This will assure oil returns to the compressor. Plugging
the power module in immediately may cause damage to
internal parts.
Help Prevent Tragedies
Child entrapment and suffocation are not problems of the
past. Junked or abandoned refrigerators are still dangerous
- even if they sit out for "just a few days".
If you are getting rid of your old freezer, please follow the
instructions below to help prevent accidents.
Before you throw away your old refrigerator:
• Take off the doors or remove the drawers.
• Leave the shelves in place so children may not easily
climb inside.
UNPACKING YOUR REFRIGERATOR/FREEZER
Tools to have available for installation:
• Phillips screwdriver
• Flat blade screwdriver
• Hex head nut drivers size 1⁄4" and 5⁄16"
• Level
• Drill and drill bit (#6 - .204)
• Open end wrenchs size 1⁄4", 7⁄16" and 1⁄2"
• Slip joint pliers
• Adjustable wrench
• Tape measure
• Hex socket and ratchet size 7⁄16"
• 3/32" Hex key (Allen wrench)
4
Power module serial
plate is behind the
grille on the front of
the power module-
Cabinet serial plate is on the
inside top liner toward the right
side-
It is important you send in your warranty registration cards
immediately after taking delivery of your refrigerator/
freezer.
The following information will be required when registering
your units.
Service Number
Serial Number
Date of Purchase
Dealer’s name and address
The service number and serial number can be found on the
serial plates which are located on the power module and
the cabinet. See gure 1 above for locations.
Warranty Registration
Figure 2
Power module
serial plate
Figure 3
Cabinet
serial plate
Figure 1
Serial plate
locations
(42CSS shown)
WARRANTY REGISTRATION
Each unit will have two sets
of serial plates which will
require lling out two warranty
registration cards.
5
"A"
11"
(27.9cm)
73" to 735⁄8"
(185.4cm to 187cm)
84" to 845⁄8"
(213.4cm to 214.9cm)
1⁄2"
(12.7mm)
1⁄2"
(12.7mm)
35"
(88.9cm)
"B" 1"
(25.4mm)
241⁄2"
(62.2cm)
To kickplate
To face of door
197⁄8"
(50.5cm)
251⁄8"
(63.8cm)
273⁄16"
(69.1cm)
29⁄16"
(6.5cm)
593⁄4"
(151.8cm)
Electrical Requirements:
A grounded 115 volt, 60 cycle, single phase, 15 amp
dedicated circuit is required. Follow all local building codes
when installing electrical and unit.
MODEL "A" "B"
M60CSS-WS 60" (152.4cm) 23" (58.4cm)
M60CSS-SS 60" (152.4cm) 23" (58.4cm)
M72CSS-WS 72" (182.9cm) 35" (88.9cm)
M72CSS-SS 72" (182.9cm) 35" (88.9cm)
PRODUCT DIMENSIONS FOR M(XX)CSS WITH SOLID DOORS
6
PRODUCT DIMENSIONS FOR M(XX)CSS WITH SOLID OVERLAY DOORS
"A"
11"
(27.9cm)
73" to 735⁄8"
(185.4cm to 187cm)
84" to 845⁄8"
(213.4cm to 214.9cm)
1⁄2"
(12.7mm)
1⁄2"
(12.7mm)
35"
(88.9cm)
"B" 1"
(25.4mm)
241⁄2"
(62.2cm)
To kickplate
To face of door
197⁄8"
(50.5cm)
251⁄8"
(63.8cm)
593⁄4"
(151.8cm)
Electrical Requirements:
A grounded 115 volt, 60 cycle, single phase, 15 amp
dedicated circuit is required. Follow all local building codes
when installing electrical and unit.
MODEL "A" "B"
M60CSS-WP 60" (152.4cm) 23" (58.4cm)
M60CSS-SP 60" (152.4cm) 23" (58.4cm)
M72CSS-WP 72" (182.9cm) 35" (88.9cm)
M72CSS-SP 72" (182.9cm) 35" (88.9cm)
7
PRODUCT DIMENSIONS FOR M(XX)CSS WITH SOLID FREEZER DOOR
AND GLASS REFRIGERATOR DOOR
"A"
"D"
11"
(27.9cm)
73" to 735⁄8"
(185.4cm to 187cm)
84" to 845⁄8"
(213.4cm to 214.9cm)
1⁄2"
(12.7mm)
1⁄2"
(12.7mm) "C"
"B" 1"
(25.4mm)
241⁄2"
(62.2cm)
To kickplate
To face of door
197⁄8"
(50.5cm)
251⁄8"
(63.8cm)
273⁄16"
(69.1cm)
29⁄16"
(6.5cm)
Electrical Requirements:
A grounded 115 volt, 60 cycle, single
phase, 15 amp dedicated circuit is
required. Follow all local building codes
when installing electrical and unit.
MODEL "A" "B" "C" "D"
M60CSS-SGX 60" (152.4cm) 23" (58.4cm) 35" (88.9cm) 593⁄4" (151.8cm)
M72CSS-SGX 72" (182.9cm) 35" (88.9cm) 35" (88.9cm) 593⁄4" (151.8cm)
8
PRODUCT DIMENSIONS FOR M(XX)CSS WITH SOLID FREEZER OVERLAY
DOOR AND GLASS REFRIGERATOR OVERLAY DOOR
"A"
11"
(27.9cm)
73" to 735⁄8"
(185.4cm to 187cm)
84" to 845⁄8"
(213.4cm to 214.9cm)
1⁄2"
(12.7mm)
1⁄2"
(12.7mm) "C"
"D"
"B" 1"
(25.4mm)
241⁄2"
(62.2cm)
To kickplate
To face of door
197⁄8"
(50.5cm)
251⁄8"
(63.8cm)
Electrical Requirements:
A grounded 115 volt, 60 cycle, single
phase, 15 amp dedicated circuit is
required. Follow all local building codes
when installing electrical and unit.
MODEL "A" "B" "C" "D"
M60CSS-SGP 60" (152.4cm) 23" (58.4cm) 35" (88.9cm) 593⁄4" (151.8cm)
M72CSS-SGP 72" (182.9cm) 35" (88.9cm) 35" (88.9cm) 593⁄4" (151.8cm)
9
PRODUCT DIMENSIONS FOR MPRO(XX)CSS WITH SOLID DOORS
241⁄2"
(62.2cm)
To kickplate
To face of door
197⁄8"
(50.5cm)
251⁄8"
(63.8cm)
"A"
"B" 35"
(88.9cm)
11"
(27.9cm)
73" to 735⁄8"
(185.4cm to 187cm) 84" to 845⁄8"
(213.4cm to 214.9cm)
1⁄2"
(12.7mm)
1⁄2"
(12.7mm)
1"
(25.4mm)
275⁄8"
(70.2cm)
3"
(7.6cm)
593⁄4"
(151.8cm)
Electrical Requirements:
A grounded 115 volt, 60 cycle, single phase,
15 amp dedicated circuit is required. Follow all
local building codes when installing electrical
and unit.
MODEL "A" "B"
MPRO60CSS-SS 60" (152.4cm) 23" (58.4cm)
MPRO72CSS-SS 72" (182.9cm) 35" (88.9cm)
10
PRODUCT DIMENSIONS FOR MPRO(XX)CSS WITH SOLID FREEZER DOOR
AND GLASS REFRIGERATOR DOOR
241⁄2"
(62.2cm)
To kickplate
To face of door
197⁄8"
(50.5cm)
251⁄8"
(63.8cm)
"A"
"B" "C"
11"
(27.9cm)
73" to 735⁄8"
(185.4cm to 187cm) 84" to 845⁄8"
(213.4cm to 214.9cm)
1⁄2"
(12.7mm)
1⁄2"
(12.7mm)
1"
(25.4mm)
275⁄8"
(70.2cm)
3"
(7.6cm)
"D"
MODEL "A" "B" "C" "D"
MPRO42CSS-SGX 42" (106.7cm) 17" (43.2cm) 23" (58.4cm) 4711⁄16" (121.1cm)
MPRO48CSS-SGX 48" (121.9cm) 17" (43.2cm) 29" (73.7cm) 5311⁄16" (136.4cm)
MPRO60CSS-SGX 60" (152.4cm) 23" (58.4cm) 35" (88.9cm) 593⁄4" (151.8cm)
MPRO72CSS-SGX 72" (182.9cm) 35" (88.9cm) 35" (88.9cm) 593⁄4" (151.8cm)
Electrical Requirements:
A grounded 115 volt, 60 cycle, single
phase, 15 amp dedicated circuit is re-
quired. Follow all local building codes
when installing electrical and unit.
Questo manuale è adatto per i seguenti modelli
5
Indice
Lingue:
