Master cook SRPGT19002 Manuale utente
Cart Assembly
Model#: SRPGT19002
Questions, problems, missing parts? Please call our customer service
department at 1-888-909-3888, 7:30AM - 4:30PM PST, Mon. - Fri., or
SKU# : LGG09-0019
R
USER MANUAL
Read this User Manual carefully and
completely before using your grill to
reduce the risk of fire, burn hazard
or other injury.
TABLE OF CONTENTS
1
Exploded View ............................................................................................................................2
Part List .......................................................................................................................................3
Assembly Instructions..................................................................................................................4
Connecting The Gas Grill To The Cart.........................................................................................7
Connecting 20LB Gas Cylinder....................................................................................................8
Gas Hook Up................................................................................................................................9
Leak Testing.................................................................................................................................11
Warranty.......................................................................................................................................12
2
EXPLODED VIEW
H
I
J
K
L
R
Q
P
N
M
O
T
3
PARTS LIST
HARDWARE
Hardware # Description Picture Qty
M6 x 12 Bolt
8
AA
CC
M10 Nut
2
BB
M4 x 8 Bolt
24
EE
DD
Phillips screwdriver
Wrench
1
1
Part No Description Quantity Part No Description Quantity
H1
I
K
L
M
1
1
1
1
1
1
1
1
2
2
Picture
J
Picture
O
Q
R
N
P
Cart Left
Rear Leg
Cart Left
Front Leg
Cart Front
Panel
Cart Right
Front Leg Wheel Cap
Wheel
Wheel Axle
Cart Bottom
Panel
Cart Right
Rear Leg
Cylinder Fixing
Rod
Cart Upper
Panel
T2
Fixing Bar
4
ASSEMBBLY INSTRUCTIONS
1
2
Flip over the cart assembly, install the
cart bottom panel (N) with 4pcs bolts
(AA).
AA x 4:
BBx 16:
I
J
L
M
H
Install four cart legs to the
cart upper panel (H) with
16pcs bolts (BB).
AA x4
N
BBx16
5
ASSEMBBLY INSTRUCTIONS
3
4
BBx 8:
Install cart front panel (K) with
4pcs bolts (AA).
BB x8
AAx 4:
Install 2pcs fixing bar (T) to
four legs as illustrated with
8pcs bolts (BB).
T
AA x 4 K
Flip over the cart assembly
6
ASSEMBBLY INSTRUCTIONS
5
6
CCx 2:
Insert the cylinder fixing rod (O) to
the cart bottom panel (N).
R x2
Q x2 P x1
CCx2
Insert the wheel axle (P) as
illustrated.
Install two wheels (Q) to the wheel
axle (P) with 2pcs nuts(CC).
Place two wheel caps (R) to the
wheels (Q).
O x1
7
TRACEHTOTLLIRGSAGEHT
1. Make sure the burner control knob of the gas grill is in the OFF position.
Install the gas grill to the cart by connecting the hasp parts which preinstalled on the cart and the
gas grill.
2.
CONNECTING
CONNECTING 20LB GAS CYLINDER (NOT INCLUDED) TO THE GAS GRILL ASSEMBLY
4. Place the 20LB gas cylinder (not included) into hole at the cart bottom panel(N).
5. Check to ensure the valve of gas cylinder is securely turned off prior to making the connection.
6. Connect another side of the hose assembly to the gas cylinder. Turn the nut clockwise to make
sure it’s securely tightened.
Shut off gas supply by rotating valve of gas cylinder clockwise.
Gas cylinder
Fix hose assembly to
the regulator by rotating
clockwise
8
3. Connect the hose assembly (S) to the regulator (F) by rotating it clockwise and fasten.
it
S x1
2. Disconnect gas canister (not included) from canister holder if there is a gas canister on the gas grill.
1. Make sure the burner control knob of the gas grill is in the OFF position.
F
GAS HOOK-UP
Only the hose assembly supplied with the grill should be
used. Any hose assembly must be specified by the grill
manufacturer.
This is a liquid propane configured grill.
Do not attempt to use a natural gas supply.
Total gas consumption (per hour) of this grill with
burners on “MAX”: 11,500 btu/hr
The 20lb. cylinder must be provided with a shut off valve
terminating in an LP gas supply cylinder valve outlet
specified, as applicable, for connection type QCC1 is the
standard for compressed gas cylinder valve outlet and
inlet connection .ANSI/CSA-V-1
The cylinder supply system must be arranged for vapor
withdrawal. The cylinder must include a collar to protect
the cylinder valve.
Other cylinders may be acceptable for use with the
appliance provided they are compatible with the appliance
retention means.
A dented or rusty LP Gas Cylinder may be hazardous and
should be checked by your LP supplier. Never use a
cylinder with a damaged valve. The LP gas cylinder must
be constructed and marked in accordance with the
specifications for LP - Gas Cylinders of the U.S Department
of Transportation (D.O.T.) or the National Standard of
Canada, , Cylinders, Spheres and Tubes
for Transportation of Dangerous Goods; and Commission,
as applicable.
CAN/CSA-B339
LP GAS CYLINDER REQUIREMENTS
(20LB. CYLINDER)
Main Man ifold operating pressure: 11” water column
(W.C.)/2.74kPa.
LP Gas Cylinder must be fitted with Overfill Prevention
Device (OPD).
Ensure that the black plastic grommets on the LP cylinder
valve are in place and that the hose does not come into
contact with the grease tray or the grill head.
Your grill is equipped with gas supply orifices for use only
with liquid propane gas. It is also equipped with a high
capacity hose assembly for connection to a standard 20lb.
LP cylinder (18-1/4” high, 12-1/4” diameter).
Make sure cylinder valve is in its full off position (turn
clockwise to stop).
2. Check cylinder valve to ensure it has proper external
male threads (type 1 connection per ).ANSIZ21.81
3. Make sure all burner valves are in the OFF position.
4. Inspect valve connections, port and hose assembly.
Look for any damage or debris. Remove any debris.
Inspect hose for damage. Never attempt to use
damaged or obstructed equipment. See your local LP
gas dealer for repair.
When connecting hose assembly to the valve, hand
tighten the nut clockwise to a complete stop. Do not
use a wrench to tighten. Use of a wrench may damage
the quick coupling nut and result in a hazardous
condition.
6. Open the cylinder valve fully (counterclockwise). Use
a soapy water solution to check all connections for
leaks before attempting to light the grill. See below. If
a leak is found, turn the cylinder valve off and do not
use the grill until a local LP gas dealer can make
repairs.
LP GAS HOOK-UP
CONNECTION
TO CONNECT THE LP GAS SUPPLY CYLINDER
9
1.
5.
Questo manuale è adatto per i seguenti modelli
1
Indice
