MasterCraft 068-1577-2 Manuale utente
model no. 068-1577-2
54" (137 cm) Workstation
IMPORTANT
Please read this manual carefully before assembling and
using this product, and save it for reference.
INSTRUCTION
MANUAL
Due to continuing improvements,
the actual product may differ slightly
from the product described herein.
2
TABLE OF CONTENTS
3
3
6
18
19
TABLE OF CONTENTS
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions. Read all
instructions and follow them carefully with use of this product.
NOTE:
If any parts are missing or damaged, or if you have any questions, please call our toll-free
helpline at: 1-800-689-9928. Have the product number, cash register receipt and the date
of purchase available when you call. DO NOT SHIP YOUR PRODUCT BACK TO THE STORE
UNLESS WE SEND YOU WRITTEN INSTRUCTIONS FOR RETURN.
MAINTENANCE
COORDINATING PRODUCTS
WARRANTY
SAFETY
ASSEMBLY INSTRUCTIONS
model no. 068-1577-2 I contact us 1-800-689-9928
4
EXPLODED VIEW
5
PARTS LIST
To reduce the risk of serious injury, read and follow the safety instructions below before assembling
and using this product.
SAFETY
3
SAFETY / MAINTENANCE
Before assembling and using this product, carefully read this instruction manual and all of the labels
affixed to the product. Failure to follow all warnings and instructions may result in product damage or
personal injury.
Save all warnings and instructions for future reference.
-Maximum load: 830 lb (376 kg)
-Maximum load for shelf: 100 lb (45 kg)
-Maximum load for bottom panel: 150 lb (68 kg)
-Maximum load for each drawer: 70 Ib (32 kg)
-Maximum load for rubberwood top: 300 Ib (136 kg)
Keep the product on level surfaces. The product could become unstable and it may tip over if
stored or moved on an uneven surface, which may cause personal injury, death or product damage.
This product is intended for indoor use only.
Use at least two people to move, assemble or install this cabinet. Failure to do so can result in
personal injury or product damage.
DO NOT open more than one drawer at a time.
Fill from the bottom drawer up. If the cabinet is filled from the top drawer down, it will be top-heavy
and may tip over.
Use the brakes when not moving this product. This will prevent the product from rolling, which may
cause personal injury or product damage.
Close and lock the doors before moving this cabinet.
DO NOT alter this product in any manner. For example, do not weld external bar locks or attach
electrical equipment. This may cause product damage or personal injury.
DO NOT leave children unattended near this product. Cabinets may tip over if improperly opened.
DO NOT exceed the following weight limits for this product.
Lubricate the slides (twice a year) with a spray lubricant or light duty oil.
Periodically clean the surfaces with a soft rag and water.
MAINTENANCE
This product is not designed for commercial nor industrial usage.
For castors, use high quality bearing grease once a year.
Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable
cleaning fluid.
DO NOT step or climb on this product or on the drawers.
It is always recommended to secure this product to the wall with the anti-tip hardware provided.
EXPLODED VIEW
4
model no. 068-1577-2 I contact us 1-800-689-9928
EXPLODED VIEW
1
2
5
4
3
9
20
23 19
8
7
10
16
6
12
13
22
17
21
26
27
28
31
30
34
35
36
15
37
20
38
19
7
1
25 26
8
4
36
23
24
25
32
33
29
11
14
18
PARTS LIST
PARTS LIST
5
No.
12
1
3
524
1
5
7
M6 x 12 hex bolt 41
Description Qty.
No. Description
No. Qty.
20
22
23
25
4
2
1
4
4
6
24
26
11
Shelf
Side handle
1
10
2
12
6
16
27
Front top beam
1
29 2
Part No. Part No.
16
Right slide
Swivel castor
M8 x 25 hex bolt
Washer
Bottom panel
21
Rubber ring
2
30
1
Rigid castor
Right side panel
49
NOTE: Extra pcs are provided.
*
Handle
M6 x 40 hex tapping bolt
M6 x 16 hex socket
head screw *
Drawer panel
168
Middle drawer
front panel
Bottom drawer
front panel
M4 x 6 cross-head pan
head tapping bolt
M4 x 5 cross-head bolt
Top drawer front panel
13
1
16
Right door
4
15
Locking hook
Drawer liner
214
Lock (001-010)
Pin
117
19
Key (001-010)
Left door
28
2
Left slide
31
Centre panel
1
33
Rubberwood top
32
4
Back panel
1
35
34
4
36
1
2
16
1
1
Door stopper
37 1
Shelf bracket
NOTE:
Replacement keys may be ordered. Call our toll-free number. The code which appears on the lock will
be required.
Give information for spare parts: part number and quantity required.
1
18
Magnet
Left side panel
Back top beam
38
Hex wrench
1
321051
306046
121645
320327
242933
242781
320335
320336
300399
121548
121549
121550
302065
552183
304236
236397
118124
306018
237444
314219
118123
203902
121659
321047
324002
302066
121644
312033
236270
300398
121608
113539
121646
572164
320328
242934
317023
304196
*
*
*
STEP 1 ATTACH THE SIDE AND BOTTOM PANELS
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
• Hex wrench (38)
• Cross-head Screwdriver (not included; magnetic is preferable)
• Measuring Tape (not included)
Please wear gloves during the whole assembly process.
NOTE: Assemble on a flat surface. A piece of cardboard is recommended to keep the product
from being scratched during assembly.
6
model no. 068-1577-2 I contact us 1-800-689-9928
ASSEMBLY INSTRUCTIONS
• Power Drill (not included)
Lay the bottom panel (28) on its front and attach the side panels (3 & 32) to the bottom
panel (28) with two M6 x 16 hex socket head screws (4) through the holes on bottom left
and right corners. D0 NOT tighten.
Back
•
• Screw two M6 x 16 hex socket head screws (4) at the middle of bottom. Tighten securely.
3
28
32
4
STEP 3 ATTACH THE CENTRE PANEL
STEP 2 INSTALL THE CASTORS
NOTE: For easy movement, the swivel casters are suggested to be installed on the same side
as the side handle.
ASSEMBLY INSTRUCTIONS
7
Position the two rigid castors (27) on one side of the bottom of the cabinet. Insert the M8 x 25
hex bolts (25) through washers (26), then through the castors and into the bottom of the cabinet.
Tighten securely.
•
Repeat for the two swivel castors (14) on the other side of the cabinet.
•
Attach the centre panel (34) to the bottom panel (28) with two M6 x 16 hex socket head screws (4).
Tighten securely.
14
25
26
27
34
4
28
STEP 5 ATTACH THE BACK PANELS
STEP 4 ATTACH THE BACK TOP BEAM
8
model no. 068-1577-2 I contact us 1-800-689-9928
ASSEMBLY INSTRUCTIONS
Attach the back panels (33) to the back of the cabinet with twenty-eight M6 x 16 hex socket head
screws (4). Insert the screws by hand. DO NOT tighten.
•
Attach the back top beam (37) to the side panels (3 & 32) with two M6 x 16 hex socket head
screws (4). Insert the screws by hand. DO NOT tighten.
The top edge of the top back panel should be inserted under the back top beam.
4
37
32
3
33
4
123
30
29
STEP 6 ATTACH THE DOOR STOPPER
First press the two trapezoidal tabs at the right side of the front top beam (5) inwards by 90 degrees.
•
Insert the door stopper (30) onto the two tabs. Make sure the magnets (29) are outside of the front
top beam and face toward the front of the cabinet.
•
Finally, bend the two trapezoidal tabs of the front top beam (5) outwards until they are against the
door stopper (30).
•
STEP 7 ATTACH THE FRONT TOP BEAM
Attach the front top beam (5) to the side panels (3 & 32) with six M6 x 16 hex socket head screws (4).
Insert the screws by hand. DO NOT tighten.
•
At the same time, screw four M6 x 16 hex socket head screws (4) through the side panels (3 & 32) to
the bottom panel (28). DO NOT tighten.
•
ASSEMBLY INSTRUCTIONS
9
5
3
5
34
32
28
4
STEP 8 INSTALL THE SLIDES
Front
Front
Back
Back
Left slide
Right slide
31
9
•Slide the back clip of the outer rail of a right slide (9) into the back slot at the right side panel (3) and
slide the front clip of the outer rail into the slot at the front of the right side panel (3).
•Repeat the same procedure to install the other right slides (9) to the right side panel (3).
•Repeat the same procedure to install four left slides (31) to the centre panel (34).
•Bend the eight clips above the left and right slides outwards with the help of a straight screwdriver
so as to secure the slides.
1
3
model no. 068-1577-2 I contact us 1-800-689-9928
ASSEMBLY INSTRUCTIONS
10
3
(back slot)
2(front slot)
Indice
