MasterCraft 058-9321-6 Manuale utente

INSTRUCTION MANUAL

AIR-POWERED

IMPACT WRENCH

058-9321-6

TABLE OF CONTENTS

AIR-POWERED IMPACT WRENCH 058-9321-6

QUICK START GUIDE

TECHNICAL SPECIFICATIONS 3

SAFETY GUIDELINES 4–9

KEY PARTS DIAGRAM 10

IMPORTANT INFORMATION 11–13

OPERATING INSTRUCTIONS 14–15

MAINTENANCE 16–17

TROUBLESHOOTING 18–19

EXPLODED VIEW 20

PARTS LIST 21

WARRANTY 22–23

SAFETY GUIDELINES

AIR-POWERED IMPACT WRENCH 058-9321-6

This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING

EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it

thoroughly before using the product. The symbols listed below are used to indicate this information.

Note- The word “Note” is used to inform the

reader of something he/she needs to know about

the tool.

PERSONAL SAFETY

These precautions are intended for the personal safety of the user and others working with the user.

Please take time to read and understand them.

DANGER!

Potential hazard that will result in serious

injury or loss of life.

WARNING!

Potential hazard that could result in

serious injury or loss of life.

CAUTION!

Potential hazard that may result in

moderate injury or damage to equipment.

SAFETY GUIDELINES

AIR-POWERED IMPACT WRENCH 058-9321-6

DANGER!

Potential hazard that will result in serious injury or loss of life.

•Keep children away from the work area. Do not allow children to handle

power tools.

•Keep air hose away from heat, oil, and sharp edges. Check air hose for

wear before each use and ensure that all connections are proper.

•Always ensure that the workpiece is firmly secured leaving both hands free

to control the tool.

•Always ensure that the tool has stopped before putting it down after use, for

safety purpose and to prevent possible damage to the tool/user.

•Keep proper footing at all times in order to ensure correct balance.

•Do not use oxygen or any other combustible or bottled

gas to power air-powered tools. Failure to observe this

warning can cause explosion and serious personal injury

or death. Use only the compressed air to power the

air-powered tools. Use a minimum of 25' (7.6 m) of hose

to connect the tool to the compressor. Failure to comply

will result in serious injury or loss of life.

•Risk of electric shock: Do not expose the compressor to rain. Store it

indoors. Disconnect the compressor from power source before servicing.

Compressor must be grounded. Do not use grounding adaptors.

•Risk of personal injury: Do not direct compressed air from the air hose

towards the user or other personnel.

•Risk of inhallation: Never inhale the air produced by a compressor. Failure to

comply will result in serious injury or loss of life.

Oxygen

Hydrogen

Explosive

Combustible

MC-OM-02

SAFETY GUIDELINES

AIR-POWERED IMPACT WRENCH 058-9321-6

•Risk of bursting: Do not adjust the pressure switch or safety valve for any

reason. They have been preset at the factory for this compressor’s maximum

pressure. Tampering with the pressure switch or the safety valve may cause

personal injury or property damage.

•Risk of burns: The pump and the manifold generate high temperatures. In

order to avoid burns or other injuries, do not touch the pump, the manifold,

or the transfer tube while the compressor is running. Allow the parts to cool

down before handling or servicing. Keep children away from the compressor

at all times.

•Risk of bursting: Make sure the regulator is adjusted so

that the compressor outlet pressure is set lower than the

maximum operating pressure of the tool. Before starting

the compressor, pull the ring on the safety valve to make

sure that the valve moves freely. Drain water from tank

after each use. Do not weld or repair tank. Relieve all

pressure in the hose before removing or attaching

accessories. MC-OM-22

SAFETY GUIDELINES

AIR-POWERED IMPACT WRENCH 058-9321-6

WARNING!

Potential hazard that could result in serious injury or loss of life.

•Do not allow inexperienced or untrained individuals to operate the

Air-powered Impact Wrench.

•Always ensure that the accessories such as impact sockets are specially

designed for use with the tool. Also ensure they are secured and correctly

fastened before connecting the tool to the air supply.

•Do not use the Air-powered Impact Wrench for any task other than that

which it is designed to perform.

•Do not use Air-powered Impact Wrench unless you have been instructed on

its use. Only a qualified person should use the tool.

•Pull the pressure safety valve ring of the compressor everyday in order to

ensure that the valve is functioning properly.

•Locate the compressor in a well-ventilated area for cooling, and a minimum

of 12" (31 cm) away from the nearest wall.

•Protect the air hose and the power cord from damage and puncture. Inspect

them for weak or worn spots every week, and replace them if necessary.

•Always wear hearing protection when using an air compressor. Failure to do

so may result in hearing loss.

•Do not carry the compressor while it is running.

•Do not operate the compressor if it is not in a stable position.

•Do not operate the compressor on a rooftop or in an elevated position that

could allow the unit to fall or be tipped over.

SAFETY GUIDELINES

AIR-POWERED IMPACT WRENCH 058-9321-6

CAUTION!

Potential hazard that may result in moderate injury or damage to

equipment.

•Always ensure that the tool has stopped before connecting to the air supply.

•Do not wear watches, rings, bracelets, or loose clothing when using any air

tool.

•Do not overload the tool. Allow the tool to operate at its optimum speed for

maximum efficiency.

• Do not use a tool that is leaking air, with missing or damaged parts, or that

requires repairs. Verify that all screws are securely tightened.

• For optimal safety and tool performance, inspect the tool daily in order to

ensure free movement of the trigger, safety mechanisms, and springs.

•Always keep your air tool clean and lubricated. Daily lubrication is essential

to avoid internal corrosion and possible failures.

•Ensure that the floor is not slippery and wear non-slip shoes. Floors should

be kept clean and clear.

•Always follow all workshop safety rules, regulations, and conditions when

using the Air-powered Impact Wrench.

•Do not carry the tool by the air hose.

•Do not use the tool near or below freezing temperatures, as doing so may

cause tool failure.

•Do not store the tool in a freezing environment to prevent ice formation on

the operating valves of the tool, as doing so may cause tool failure.

•Handling and storage of oil: Use with adequate ventilation. Avoid contact of

oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a

tightly closed container in a cool, dry, well-ventilated area free from

incompatible substances.

Indice

Altri manuali MasterCraft Utensili elettrici

MasterCraft

MasterCraft 054-8251-6 Manuale utente

MasterCraft

MasterCraft 058-7732-0 Manuale utente

MasterCraft

MasterCraft 054-8258-2 Manuale utente

MasterCraft

MasterCraft 54-4790-6 Manuale utente

MasterCraft

MasterCraft 054-1266-4 Manuale utente

MasterCraft

MasterCraft 055-5509-2 Manuale utente

MasterCraft

MasterCraft 054-1249-6 Manuale utente

MasterCraft

MasterCraft 054-3121-6 Manuale utente

MasterCraft

MasterCraft SC20IFDB Manuale utente

MasterCraft

MasterCraft 054-8263-8 Manuale utente

MasterCraft

MasterCraft 057-7944-8 Manuale utente

MasterCraft

MasterCraft 54-8110-2 Manuale utente

MasterCraft

MasterCraft 054-1252-6 Manuale utente

MasterCraft

MasterCraft 055-5530-8 Manuale utente

MasterCraft

MasterCraft 055-3505-2 Manuale utente

MasterCraft

MasterCraft 054-4289-2 Manuale utente

MasterCraft

MasterCraft 054-6908-8 Manuale utente

MasterCraft

MasterCraft 054-8259-0 Manuale utente

MasterCraft

MasterCraft 054-0277-4 Manuale utente

MasterCraft

MasterCraft 054-8223-4 Manuale utente

MasterCraft

MasterCraft 058-9852-2 Manuale utente

MasterCraft

MasterCraft MAXIMUM 054-1232-4 Manuale utente

MasterCraft

MasterCraft 058-9642-2 Manuale utente

MasterCraft

MasterCraft 054-4273-8 Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale