MasterCraft 046-8652-2 Manuale utente
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
INSTRUCTION
MANUAL
IMPORTANT:
Please read this manual carefully before installing
this gear rack and save it for reference.
GEAR RACK
model no. 046-8652-2
99001
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
3
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
NOTE:
If any parts are missing or damaged, or if you have any questions, please call our
toll-free helpline at 1-800-689-9928.
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions.
Read all instructions and follow them with use of this product.
TABLE OF CONTENTS
Pre-installation 4
Installation 6
Warranty 8
TABLE OF CONTENTS
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
4
model no. 046-8652-2 | contact us 1-800-689-9928
PRE-INSTALLATION
TOOLS REQUIRED
Stud finder Drill
Level Ratchet
Marker
HARDWARE INCLUDED
AA BB CC DD EE FF
HARDWARE LIST
No. Description Qty.
AA Lag bolt 6
BB Mushroom head screw 8
CC Large nut 8
DD Lock pin 4
EE Lock pin nut 4
FF Hex key 1
GG Cross head screws 3
GG
5
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
PRE-INSTALLATION
PACKAGE CONTENTS
PART LIST
No. Description Qty.
MA Horizontal Shelf Support Left 1
MB Horizontal Shelf Support Right 1
MC Diagonal Shelf Support Brackets 2
MD Vertical base assembly Brackets 2
MF Front Shelf Bracket 1
MH Wall Mount Base Assembly – Top Bracket 1
MI Grid 1
MJ Organizer Unit 1
MK 5” (2.7 cm) S hooks 2
ML 12‘‘ (30,5 cm) S hooks 2
MM Side Hook 1
MA
MB
MC x 2
MD x 2
MF
MH
MI
MJ
ML x 2
MM
MK x 2
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
6
model no. 046-8652-2 | contact us 1-800-689-9928
headline bars
continuation tabs
notes
warnings
INSTALLATION INSTRUCTIONS
WARNING! The gear rack must be installed into wall studs. It is the responsibility of the
installer to ensure that wall mounting surface and structure are sufficient in strength and capacity to
support the weight of the gear rack and its contents. Failure to observe these conditions may result
in injury or death. Locate your studs. You should have studs located 48’’ (122 cm) apart. If this is
the case, use lag bolts to screw through holes in parts MD into wall. If your studs are not a standard
width, use the holes in the backplate MH.
FPO
Assemble MD, MD, MH as shown below and tighten bolts lightly as you will remove these to
install parts in steps 3 and 4.
1
2Find your studs and predrill (use 5/32’’ drill bit) one top hole, and screw in using your
ratchet. Level, predrill and install the other side. Continue installing four other bolts to studs.
Use these holes to install if your studs aren’t
exactly 48” (1.22 m) apart.
x 2 BB
MD
MH
MD x 2 CC
Dimensions : 48 x 18 x 18”
(121.92 x 45.72 x 45.72 cm)
6 X AA
7
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
INSTALLATION INSTRUCTIONS
Connect MC to MD. Connect
MA to MD with the bolts used
in step 1.
Connect MC to MD. Connect
MB to MD with the bolts used
in step 1.
Connect front shelf bracket
MF with MA and MC/left side
and MB and MC/right side.
4
INSTALLATION INSTRUCTIONS
3
5
x 2 BB
x 2 CC
MD
MA
MB
MB
MC
MC
MA
MF
MC
MD
MC
x 2 BB
x 2 CC
x 2 BB
x 2 CC
headline bars
continuation tabs
notes
warnings
8
model no. 046-8652-2 | contact us 1-800-689-9928
INSTALLATION INSTRUCTIONS
This Mastercraft product carries a one (1) year replacement warranty against defects in
workmanship and materials. Mastercraft Canada agrees to replace the defective product free of
charge within the stated warranty period, when returned by the original purchaser with proof of
purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by
Mastercraft Canada Toronto, Canada M4S 2B8
WARRANTY
TIGHTEN ALL BOLTS.
Install grid. Install 2 lock pins at each end.
Install the rear organizer onto the MH bar with the 3 mushroom head screws.
Attach S hooks and rear organizer.
6
7
8
x 4x 4
x 3
BB
ML x 2
MM x 1
MJ x 1
MK x 2
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
8
N° de modèle : 046-8652-2 | Communiquez avec nous au 1 800 689-9928
INSTALALTION INSTRUCTIONS
Ce produit Mastercraft est couvert par une garantie de remplacement d’un (1) an contre les
défauts de fabrication et de matériaux. Mastercraft Canada s’engage à remplacer gratuitement
le produit défectueux dans la période de garantie indiquée, lorsqu’il est retourné par l’acheteur
original avec une preuve d’achat. Ce produit n’est pas garanti contre l’usure ou les dommages
dues à une mauvaise utilisation et / ou abus.
Fabriqué en Chine
Importé par
Mastercraft Canada Toronto, Canada M4S 2B8
GARANTIE
SERREZ TOUS LES BOULONS
Installez la grille. Fixez 2 boulons d’arrêt.
Installez l’unité de rangement sur la barre MH au moyen de 3 vis à tête
bombée. Fixez les crochets en S.
6
7
8
x 4
x 4
x 3
BB
ML x 2
MM x 1
MJ x 1
MK x 2
7
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
INSTRUCTIONS D’INSTALLATION
Connectez MC à MD.
Connectez MA à MD avec les
vis utilisées à l’étape 1
Connectez MC à MD. Connectez
MB à MD avec les vis utilisées
à l’étape 1.
4
3
5Connectez le support de
tablette avant MF avec MA
et MC/côté gauche et MB et
MC/côté droit.
x 2 BB
x 2 CC
x 2 BB
x 2 CC
x 2 CC
MD
MA
MC
MB
MC
MD
MB
MC
MC
MA
MF
x 2 CC
Indice
