MasterForce 244-5968 Manuale utente

Digital Inspection Camera

with 2.4" Screen

OPERATOR’S MANUAL

To Reduce The Risk Of Injury, User Must Read And

Understand Operator’s Manual. Save These Instructions For Future Reference.

CAUTION:

244-5968

Save This Manual.............................................................................

Digital Inspection Camera Safety Instructions ................................

Electrical Safety................................................................................

Use and Care...................................................................................

Cleaning and Storage......................................................................

Tool Set Up.......................................................................................

Inspection.......................................................................................

Operating Instructions.....................................................................

Parts List..........................................................................................

Speciﬁcations..................................................................................

Troubleshooting...............................................................................

Notes...............................................................................................

Warranty/Replacement....................................................................

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 10

TABLE OF CONTENTS

SAVE YOUR RECEIPTS

THIS WARRANTY IS VOID WITHOUT THEM

Digital Inspection Camera

with 2.4" Screen

Page 1 Page 10

This MASTERFORCE™brand tool carries our 90-Day Money Back Guarantee.

If you are not completely satisfied with your MASTERFORCE™brand power tool for

any reason within ninety (90) days from the date of purchase, return the tool with your

original receipt to any MENARDS®retail store, and we will provide you a refund - no

questions asked.

3 YEAR LIMITED WARRANTY

This MASTERFORCE™brand tool carries our famous No Hassle 3 Year Limited

Warranty to the original purchaser. If, during normal use, this MASTERFORCE™power

tool breaks or fails due to a defect in material or workmanship, simply bring the tool with

the original sales receipt back to your nearest MENARDS®retail store. At its discretion,

MASTERFORCE™agrees to have the tool or any defective part(s) repaired or replaced

with the same or similar MASTERFORCE™product or part free of charge, within the

stated warranty period, when returned by the original purchaser with original sales

receipt. Not withstanding the foregoing, this 3 year limited warranty does not cover any

damage that has resulted from abuse or misuse of the Merchandise. This warranty: (1)

excludes expendable parts including but not limited to blades, brushes, belts, bits, light

bulbs, and/or batteries; (2) shall be void if this tool is used for commercial and/or rental

purposes; and (3) does not cover any losses, injuries to persons/property or costs. This

warranty does give you specific legal rights and you may have other rights, which vary

from state to state. Be careful, tools are dangerous if improperly used or maintained.

Seller’s employees are not qualified to advise you on the use of this merchandise. Any

oral representation(s) made will not be binding on seller or its employees. The rights

under this 3 year limited warranty are to the original purchaser of the merchandise and

may not be transferred to any subsequent owner. This 3 year limited warranty is in lieu

of all warranties, expressed or implied including warranties or merchantability and

fitness for a particular purpose. Seller shall not be liable for any special, incidental, or

consequential damages. The sole exclusive remedy against the seller will be for the

replacement of any defects as provided herein, as long as the seller is willing or able to

replace this product or is willing to refund the purchase price as provided above. For

insurance purposes seller is not allowed to demonstrate any of these power tools for you.

For questions / comments, technical assistance or repair parts -

Please call toll free at: 1-800-255-7011 (M-F 8am - 6pm CST)

SAVE THIS MANUAL

DIGITAL INSPECTION CAMERA SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

USE AND CARE

Page 2

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate camera near moving machinery. The cable can be tangled in moving parts,

pulling in the power tool and your hands and arms.

• Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus

that produce heat.

• Children should not be allowed to use this device.

• Do not use camera to inspect spaces or enclosures known or suspected to contain live

electrical wiring

• The camera is not shock resistant, do not immerse the camera handle or display screen in water.

• Use personal protective equipment. Always wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or hearing protection used according to

appropriate conditions will reduce personal injuries.

Page 9

NOTES

• Reference this manual for all safety warnings and precautions, operating and maintenance

procedures, parts list and diagrams.

• Keep your invoice with this manual and write your invoice number on the inside

of the front cover.

• Keep the manual and invoice in a safe, dry place for future reference.

• Be sure to read and understand all safety instructions in this manual, including all safety

alert symbols such as "danger'', "warning", and "caution" before using this tool. Failure to

follow all instructions may result in serious personal injury.

• Save all warnings and instructions for future reference.

• Use personal eye protection according to the particular investigations.. Protective equipment

such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

• Switch off the instrument when not in use and store in a dry place

• This Visual Inspection Camera is not intended for medical use or personal inspection.

• Store the camera out of the reach of children and do not allow persons unfamiliar with the

camera or these instructions to operate the item.

• Use the camera and its additional cable in accordance with these instructions, taking into

account the working conditions and the work to be performed.

• Use of the camera for operations different from those intended could result in a

hazardous situation.

• Only use accessories speciﬁcally recommended for this camera, others may be hazard

WARNING:

CAUTION:

Page 3 Page 8

CLEANING AND STORAGE

TOOL SET UP

Make sure that the Camera is OFF before performing any procedure in this section.

3. Connecting Cable:

a. Carefully push Cable’s key into Cable Connector’s slot.

b. Turn Cable Connector counterclockwise until the Cable and Cable Connector

are securely attached.

4. Disconnecting Cable:

a. Turn Cable Connector clockwise until the Cable and Cable Connector are disconnected.

b. Remove Cable.

TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK:

WARNING:

1. AFTER USE, use a mild detergent on a clean cloth to remove any oil, grease or dirt from

the Camera, especially on the buttons and ports, being careful to not put excessive

pressure on the Display Screen.

2. Remove batteries before storage.

3. Store the Camera, cables and accessories in a locked area out of the reach of children.

Slot Key

Cable

Connector

NOTES

• Clean only with dry cloth or additional soap. Certain cleaning agents and solvents are harmful

to plastics and other insulated parts. Some of these include: gasoline, turpentine, lacquer

thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents

containing ammonia.

• Keep the apparatus handle clean, dry and free of oil or grease.

• Do not expose instrument (display) to moisture

• Always remove the batteries before cleaning.

• Replace all batteries at the same time with new ones and use only the size and type

of battery speciﬁed

• Attention should be given to the environment aspects of battery disposal

• Permanent damage to the ﬂex tube and loss of operation will occur if the ﬂex tube is

subjected to narrow radius or sharp angle bends.

USE AND CARE

1. Open battery compartment by sliding battery door down

2. Insert 4 AA alkaline batteries, making sure to insert correctly according to polarity

Page 4

OPERATING INSTRUCTIONS

INSPECTION

5. Attaching Accessories:

a. Hold the accessory against the Imager Head, placing the Hook in the hole.

b. Match the slot on the Sleeve to the accessory, then slide the Sleeve down the

Imager Head until it covers the Hook.

6. Connecting to External Monitor with RCA Cable:

a. Plug one end into the RCA Video Out. Port on Camera, then plug other end into

RCA Video In Port on monitor or TV.

1. Press and hold Power button to turn Camera on.

2. Adjusting Light: Press Left button to dim and turn off light. Press Right button to

turn on light and increase brightness.

3. Flip Image: Press the button to ﬂip image horizontally and vertically.

1. BEFORE EACH USE, inspect the general condition of the tool. Check for:

a. condensation in Imager Head.

b. cracked or damaged Cable.

c. cracked or broken parts.

d. any other condition that may affect its safe operation.

Power

Brighten Light

Flip Image

Dim Light

Accessory

Imager Head

Sleeve

Hook

Page 7

TOOL SET UP

NOTES

PARTS LIST SPECIFICATIONS

TROUBLESHOOTING

Battery Type

Display Screen

Handheld Display Unit

Operating Temperature

Imager Head

Imager Head Lights

Image Sensor

Imager Head Ingress

Protection Rating

Imager Head and Cable

Operating Temperature

Video Output

4 x AA 1.5V Alkaline

2.4" TFT LCD (320 x 240)

0°C to 45°C

8.5mm (0.3")

4 x Adjustable LED

1/9" VGA CMOS

IP67 - Protected against the effect of

immersion between 15cm and 1 m

-10°C to 80°

RCA Cable

HANDHELD DISPLAY UNIT

RCA CABLE

HOOK

MAGNET

MIRROR

BATTERY COMPARTMENT

PROBLEM POSSIBLE CAUSES LIKELY SOLUTIONS

Display is on, but does

not show image.

1. Light is dim at

maximum brightness.

2. Display turns itself off.

3. Camera will not turn on.

1. Cable connection loose.

2. Imager Head is dirty.

Low Batteries Replace Batteries

1. Check that cable is connected

2. Clean Imager Head.

1 pcs

PART # DESCRIPTION QTY PART # DESCRIPTION QTY

CABLE KEY

CABLE

IMAGER HEAD WITH LIGHT

RCA VIDEO OUT PORT

DISPLAY SCREEN

Page 5 Page 6

Indice

Altri manuali MasterForce Strumento analitico

MasterForce

MasterForce 244-5969 Manuale utente

Manuali Strumento analitico popolari di altre marche

Cocraft

Cocraft NLT04 Manuale utente

M&C

M&C GENTWO PMA1000 Manuale utente

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Manuale utente

CONDTROL

CONDTROL XP4 PRO Manuale utente

Extech Instruments

Extech Instruments BR200 Manuale utente

Dewetron

Dewetron DEWE-30-16 Manuale del prodotto

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Istruzioni per l'installazione e il funzionamento

RIDGID

RIDGID SeeSnake Compact Manuale utente

Teledyne

Teledyne 3000PA Manuale utente

YDLIDAR

YDLIDAR TIA Manuale utente

Olympus

Olympus IPLEX FX Series Manuale utente

Bosch

Bosch GLM 50 C Professional Manuale utente

Reflecta

Reflecta DigiEndoscope Manuale utente

Chinavision

Chinavision CVACZ-G696 Istruzioni per il montaggio

Fuji Electric

Fuji Electric ZKMA Manuale utente

Teledyne

Teledyne 3300TA Manuale utente

VOLTCRAFT

VOLTCRAFT IC-100HD Manuale utente

RIDGID

RIDGID micro CA-25 Manuale utente