MateGo TC14W Manuale utente

14”

Portable Monitor

User Manual

This equipment has been designed with personal considerations

in mind, but improper use may result in electric shock and fire. In order not to damage

the safety components inside the monitor, please observe the following regulations

during installation, use and maintenance.

• To prevent fire or shock hazard, do not expose this device to rain or moisture.

• Before using this equipment, make sure that all cables are properly connected and

that the power cord is not damaged. If there is any damage, please contact your

dealer immediately.

• Avoid dust, humidity and extreme temperatures. Do not place this device in any area

where it may get wet. Place the device on a stable surface.

• Never push any foreign objects or spill any liquids into theopenings on the casing of

the device.

• Please use the power cord provided with the monitor. If you use another power cord

that is not provided by the dealer, please confirm whether it meets the relevant

national standards. When the power cord is damaged, please contact your dealer for

replacement.

• Please use a power supply with a voltage of 5V and a current of 2A or above. Mobile

phone chargers, power banks, and USB3.0 ports that meet the power supply

requirements can power the display; do not use a power supply lower than 5V2A to

power the device. If you do not know the type of power supply, please ask your dealer.

Before setting up this device, users carefully read all docu-

mentations included in the product packaging.

Safety Tips

• Do not try to open the back cover of the monitor. There are no user-serviceable parts in

the machine. If the monitor is abnormal, please consult the dealer.

To avoid personal injury, observe the following:

•Do not place the monitor on a sloping surface unless there are safety measures.

• Do not drop, click or throw objects/toys on the screen. Personal injury, product damage,

and screen damage can result.

• When you leave the room for a long time, please turn off the power of the monitor.

• Do not allow children to drop or insert objects inside the monitor.

• Do not install accessories not specifically designed for the monitor.

• When the monitor is left unattended for a long time, please unplug the power cord.

• When lightning strikes, do not touch the power and signal lines, as there is a risk of

electric shock.

•Do not allow any object to press or entangle the power cord.

• Do not place the monitor where the power cord may be easily damaged.

• Put the monitor in a place where it can easily fall.

• Place the monitor near a radiator or heat source.

• The power cord is the main power isolation device and must be placed where it is

easily accessible.

Do not rub the screen panel with hard objects, as this will scratch or permanently

damage the LCD.Do not press the LCD screen with your fingers for a long time, otherwise

it will produce afterglow, which will damage the screen in severe cases.

To prevent damage to the monitor, avoid the following

situations：

To prevent fire and other injuries, please observe

the following:

・

There may be red, green and blue pixel dead pixels on the screen, but it does not

affect the display function.If possible, try to use the recommended resolution for best

results. If any mode other than the recommended resolution is used, abnormal picture

may be produced. But this is characteristic of LCD panels with fixed resolution.

A still image that stays on the screen for a long time can damage the screen and create

an afterimage. Make sure to use a screen saver. Afterimages and related problems are

not covered by the product's warranty.If you encounter any technical problems during the

use of this device, please contact professional technical service personnel or dealers.

Introduction

14”

1.The function buttons are designed with three buttons on the front, and set the

independent menu button +/-

1) Press and hold MENU for 3 seconds to turn on/off the monitor

2）Press .MENU to switch the monitor OSD menu, in the menu, press +2 to control the

cursor

3）Press MENU to confirm, the window will automatically close after 3 seconds

4）Press MENU to open the brightness shortcut adjustment menu and control the

brightness

5）Press + - to open the volume shortcut adjustment menu to control the volume

3.USB Type C full-featured interface: responsible for display power supply, audio and

video signal transmission, touch signal transmission, support positive and negative

insertion

4.USB Type C power supply interface: provides external power supply support,

supports reverse charging, is compatible with PD2.0 power supply protocol, and

supports 5V-20V protocol power supply (5V/3A is recommended)

5.Mini HDMI interface: responsible for audio and video signal transmission

6.USB interface: support external keyboard, mouse, etc.

Button Introduction

Device Connection Reference

1.Connectivity with Full-featured Type-C Interface

Device Connection Reference

The monitor supports a full-featured USB3.1TypeC interface connected to the

standard wire and one line for extended display or copy display use. The touch

version of ZB156 can be used for touch operation on the monitor (system support is

required, some systems are better optimized for touch, enter Windows 10, please

consult the dealer for details)

1.Connect Computer with Full-featured Interface

Transmission of Video, Audio,

Power Supply

TypeC to TypeC

2.Connecting Mobile Phone with TV-out Function

The monitor supports a full-featured USB3.1TypeC interface connected to the standard

cable for extended display or duplication display.

The display supports connecting the mobile phone with the standard cable, and

input the screen content of the mobile phone or customize the UI interface according

to the system settings;

* When there is no external power supply, the mobile phone battery

supplies power to the display (energy-saving mode is activated, and the display

brightness is automatically adjusted The user can adjust the brightness and volume of

the display according to the output power of the mobile phone.)

* When the external power supply is used, the monitor charges the

mobile phone reversely through the external power supply (in order to

ensure the monitor and mobile phone If you can get enough working current, please

use a charger or power bank with at least 18W as the external power supply, and a

higher power charger can quickly charge the mobile phone.)

-06-

The monitor supports a full-featured USB3.1TypeC interface connected to the

standard wire and one line for extended display or copy display use. The touch

version of ZB156 can be used for touch operation on the monitor (system support is

required, some systems are better optimized for touch, enter Windows 10, please

consult the dealer for details)

The display supports connecting the mobile phone with the standard cable, and

input the screen content of the mobile phone or customize the UI interface

according to the system settings;

*When there is no external power supply, the mobile phone battery supplies

power to the display (energy-saving mode is activated, and the display brightness is

automatically adjusted

The user can adjust the brightness and volume of the display according to the output

power of the mobile phone. )

2.Connect Mobile Phone with TV-out function

External Power Supply

(5V2A above)

Transmission of Video, Audio,

Power Supply

TypeC to TypeC

3.Connect Nintendo Switch

4.Connect Computer with HDMI Interface

The monitor has a Mini HDMI interface, which is compatible with most HDMI devices,

when connecting to a computer with an HDMI interface, you need to connect HDMI to

the computer, support computer USB3.0 power supply (Some brands of computers

may have insufficient power supply from the usb interface) and external 5V2Apower

supply.

* In the case of an external power supply, the monitor supports connecting

the Switch host with a standard cable and turning on the Switch TV mode.

* When an external 5V power supply is connected, the external power

supply supplies power to the display, and the Switch uses the body battery to run the

program, and the display output is 720P;

* When an external 15V PD protocol power supply is connected, the

external power supply supplies power to the display and the Switch at the same time.

The battery of the Switch body is in charging state/display output is 1080P.

-07-

*When the external power supply is used, the monitor charges the mobile

phone reversely through the external power supply (in order to ensure the

monitor and mobile phone

If you can get enough working current, please use a charger or power bank with at

least 18W as the external power supply, and a higher power charger can quickly

charge the mobile phone. )

3. Connect Nintendo Switch

4.Connect Computer With HDMI Interface

Video and Audio Signal

TypeC to USB A

Touch Screen Signal

and Power Supply

In the case of an external power supply, the monitor supports connecting the

Switch host with a standard cable and turning on the Switch TV mode.

When an external 5V power supply is connected, the external power supply

supplies power to the display, and the Switch uses the body battery to run the

program, and the display output is 720P;

When an external 15V PD protocol power supply is connected, the external

power supply supplies power to the display and the Switch at the same time. The

battery of the Switch body is in charging state/display output is 1080P.

If power supply of the computer USB interface is insufficient, use the external 5V2A power supply

External Power Supply

(5V2A above) TypeC to TypeC

-07-

*When the external power supply is used, the monitor charges the mobile

phone reversely through the external power supply (in order to ensure the

monitor and mobile phone

If you can get enough working current, please use a charger or power bank with at

least 18W as the external power supply, and a higher power charger can quickly

charge the mobile phone. )

3. Connect Nintendo Switch

4.Connect Computer With HDMI Interface

Video and Audio Signal

TypeC to USB A

Power Supply

In the case of an external power supply, the monitor supports connecting the

Switch host with a standard cable and turning on the Switch TV mode.

When an external 5V power supply is connected, the external power supply

supplies power to the display, and the Switch uses the body battery to run the

program, and the display output is 720P;

When an external 15V PD protocol power supply is connected, the external

power supply supplies power to the display and the Switch at the same time. The

battery of the Switch body is in charging state/display output is 1080P.

If power supply of the computer USB interface is insufficient, use the external 5V2A power supply

External Power Supply

(5V2A above)

MINI HDMI to HDMI

Note:

5.Connect More HDMI Devices

5V2A above

•The TypeC port on the right is a full-featured USB3.1 port with power supply function.

The TypeC port on the left is an auxiliary power supply port. In general, please connect

the TypeC port on the right to power the device first.

• When connecting an external HDMI cable, please connect the power

supply first, and then connect the HDMI to ensure the smooth transmission of the

signal.

• When a single wire is connected to the right typeC port, the power

saving function of the monitor will be activated, and the brightness will be automatically

adjusted to 30% to ensure power supply and save equipment power, users can adjust

the brightness according to the actual situation.

-08-

The monitor has a Mini HDMI interface, which is compatible with most HDMI

devices,

when connecting to a computer with an HDMI interface,you need to connect HDMI

to the

computer, support computer USB3.0 power supply and external 5V2A power supply.

( The touch screen version of the model must connect the TypeC to the USB interface

the computer to realize , and the user can provide the USB A to C cable by himself)

5. Connect More HDMI Devices

Video and Audio Signal

Cable Power Supply

Type C To USB

If power supply of the computer USB

interface is insufficient, use the external

5V2A power supply

Note:

•The TypeC port on the right is a full-featured USB3.1 port with power supply

function. The TypeC port on the left is an auxiliary power supply port. In general,

please connect the TypeC port on the right to power the device first.

•When connecting an external HDMI cable, please connect the power supply first,

and then connect the HDMI to ensure the smooth transmission of the signal.

• When a single wire is connected to the right typeC port, the power saving

function of the monitor will be activated, and the brightness will be automatically

adjusted to

30% to ensure power supply and save equipment power, users can adjust the

brightness according to the actual situation.

External Power Supply

(5V2A above)

MINI HDMI to HDMI

Indice

Altri manuali MateGo Monitor

MateGo

MateGo TC133X Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione