9
O ption Details continued
O ption 3 Timeout Length
O ption 3 is used to set the timeout length. The timeout length
is the maximum amount of time expected between data streams
before communication is considered interrupted. The default
(0/O ff) acts as a 5 second timeout, all other values represent the
number of seconds the display will wait for a new data stream.
The display will then do one of three things after the timeout
depending on how O ption 5 is set. The maximum timeout
allowed to be set is 255 seconds. While in setup for the time
out option LE FT decrements the value and R IG HT increments.
O ption 4 Display on Demand
O ption 4 sets the display for O n Demand mode. It is
recommended to be turned on when connected to the print
button of an indicator or when data is only sent once every 2
or more seconds. While in O n Demand mode the display will
wait for and display every data stream. While in the default
(off) the display uses every other data stream to ensure data
integrity.
O ption 5 N o Data
O ption 5 sets the display to do one of three things after a data
stream time out. The default is to display " NoData" . The other
two options are " Clear" (blank the display) and " Hold" (keep the
last weight sent). The time out length can be specified with
O ption 3. RIG H T toggles between the three choices, " N oData" ,
" Clear" , and " Hold" .
