Matsusada Precision DOPF Series Manuale utente

Instruction Manual

Rev. 1.2

DOPF series

MODEL

B/N 103.9.218 *103.9.218*

DOPF series

Note



No part of this publication may be reproduced, stored in a retrieval system, or

transmitted, in any form, or by any means, mechanical, electronic, photocopying,

recording, or otherwise, without the prior written permission of Matsusada Precision.



No patent liability is assumed with respect to the use of the information contained herein.

Moreover, because Matsusada Precision is constantly striving to improve its high-quality

products, the information contained in this manual is subject to change without notice.

Every precaution has been taken in the preparation of this manual. Nevertheless,

Matsusada Precision assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information

contained in this publication.

Trademarks

Company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

Warranty

We will repair this product free of charge if it has malfunctioned under normal usage

conditions within one year of delivery. However, repairs will be charged in the following

cases, even if during the warranty period.

1. Failures and damages that occurred due to inappropriate handling

2. Inappropriate repairs, adjustments, or modifications were made.

3. Failures and damages due to fire, natural disaster, abnormal voltage, etc.

This warranty is valid only in Japan.

For details, refer to the following website.

https://www.matsusada.com/support/manufacturer_warranty.html

DOPF series

For Safe Use of the Product

◆Introduction

The product generates high-voltage and high-energy.

Therefore, wrongly handling or operating the product may result in death or serious injury and maybe property

damage as well. To use the product safely, read the instruction manual thoroughly before use to understand

how to use and operate it properly.

Please note that we will not be held responsible for any damage or loss caused by not following the warnings,

cautions, and procedures described in the manual.

Keep the manual with you so that you can read it whenever you want.

◆Symbols

Symbols are used in the manual and product, which indicate precautions to be observed for safe use.

Understand these symbols first and then read the manual thoroughly.

Some symbols below are not used in products.

Indicates a potentially hazardous situation, which, if not avoided, may

result in serious injury or death.

Indicates a potentially hazardous situation, which, if not avoided, may

result in minor or moderate injury or in property damage.

Indicates danger/warning/caution. Refer to

the instruction manual when this symbol

appears on the unit.

Frame or chassis terminal

Indicates the possible danger of electric

shock under specific conditions, which

may result in serious injury or death.

Ground terminal

High Temperature Caution:

Indicates the possible danger of injury by

high temperature under specific

conditions.

Power ON

Indicates general prohibitions, including

warnings.

Power OFF

Indicates what must be followed.

Standby

Protective earth terminal (ground terminal

for preventing electric shock)

Bistable push button switch

Indicates the possible danger of death if

you drink it and burns or blindness if it

attaches.

Bistable push button switch

OFF

Indicates the possible danger of exposure

to radiation.

Alternative Current

DOPF series

Understand the risks.

The Product generates high-voltage and high-energy.

The product is designed for electrical engineers or the equivalents who install, wire, and operate it.

Read the instruction manual thoroughly before use and familiarize yourself with the proper use and danger of

the product.

Make sure to allow only specific people to handle the product.

Make sure to allow only the following people to handle the product:

1. who are electrical engineers or the equivalents and have already familiarized themselves with the proper

use and danger of the product, or

2. who are electrical engineers or the equivalents and have already been trained by the above-mentioned

people, or

3. who work under the supervision of the above-mentioned people.

If people other than those listed above install, wire, or operate the product, it may cause electric shock,

burnout, or injury.

Do not open or remove the case or panel of the product.

Do not disassemble, repair, or modify the product by yourself. High-voltage is applied to the inside of it.

Otherwise, it may cause electric shock, fire, or malfunction.

Moreover, if you do it, the safety and functions are not covered with the warranty.

The product does not suit to install and use in places where children may be present.

The product is designed to be installed in places such as factories or laboratories. Do not install and use it

where children may be present.

Make sure to ground it.

When the product has a protection ground terminal or GND terminal, make sure to ground it.

When the AC line input of it is an inlet type, connect the attached power cable or a power cable suitable for

your area to an outlet with the ground. Otherwise, it may result in electric shock or fire.

Regarding power cable

When a power cable is enclosed or attached to the product, do not use it for other products.

When no power cable is enclosed with the product, prepare the power cable suitable for the usage

environment and area by yourself.

Regarding the connection of power cable

Electrical engineers or the equivalents who have already been familiarized with the proper use and danger of

the product should connect the power cable to the AC input by referring to the instruction manual.

Regarding products that have acquired the safety standard, check the page describing the over-voltage

categories too.

Do not process or damage power cables

It may result in electric shock or fire.

Regarding the input voltage

Check the page describing the input terminals and input voltage in the instruction manual.

Do not provide any voltage out of the specifications.

iii

DOPF series

Regarding the fuse

The product builds in a protective fuse. In the case where a fuse holder is arranged outside of the product,

you can replace it by yourself. Refer to the instruction manual to replace it.

In the case where a fuse holder is not arranged outside of the product, you cannot replace it by yourself.

In this case, do not open the case or panel of the product and contact us.

The product is designed for indoor use.

Use the product indoors only, not outdoors. Even indoors, do not use it if there is a possibility of water

leakage, flooding, or snow covering.

Regarding operating temperature and humidity

Use the product within the range of the specifications describing in the instruction manual.

Do not use it in a place where the ambient temperature exceeds the specified range or a closed place.

Do not install the product in places where condensation may occur.

Otherwise, insulation deteriorates and it may cause electric shock, fire, or malfunction.

Do not place anything on top of the product.

Otherwise, they may fall or tumble from it.

Do not put anything into the product.

Do not put foreign objects such as metal or liquid into the product through the air inlets, air outlets, or other

openings. Otherwise, it may result in electric shock, fire, or malfunction.

Operate the product with the right hand.

Use only your right hand to operate the product and keep your left hand away from it, which can reduce the

risk of electric current flowing through the left hand to the vital organs of the body in the event of an electric

shock.

Do not touch the wiring/load connected to the output and any terminals/connectors during the

operation or just after turning output off.

Very high-voltage is on the terminals and connectors during the operation and even just after the output is

turned off. Touching them may result in serious injury or death by electric shock.

The terminals here mean all terminals like input and output terminals and terminals for communications and

remote controls.

Turn off the product before touching the wiring/load connected to the product and any

terminals/connectors on the product and cut it off from the AC input.

Before touching the terminals/connectors and wiring/load, turn off the product and unplug the AC input cable

from the outlet or turn off the AC input breaker. Then, check there is no voltage remained using a tester.

Since the output and sense terminals are connected to condensers in it, there is high-voltage remained on

them even just after it is turned off.

In order to avoid electric shock, ground the terminals to discharge using a short-circuit grounding apparatus

and check the voltage again.

The terminals here mean all terminals like input and output terminals and terminals for communications and

remote controls.

DOPF series

Level the product out to use for good heat dissipation.

Do not install the product upside down or sideways. If not, the inner heat dissipation will be insufficient.

It may result in smoke or fire due to components deterioration.

Do not install the product in a place where cold air directly blows to it.

It may result in electric leakage or burnout due to condensation.

Do not install the product in a place where it is exposed to corrosive gases or liquids.

It may result in smoke or burnout due to components deterioration.

Do not store or use the product in a place where conductive dust, such as iron powder, can enter

through the air inlet/outlet.

Doing so may cause a short circuit, resulting in electric leakage, burnout, fire, or malfunction.

Do not install the product in a dusty place.

Accumulating dust in the air inlet will make hard to cool it down it, it may result in malfunction.

In that case, remove dust immediately.

Do not block the air inlet and outlet.

Secure 30 cm space at least around the openings.

If they are blocked, the product cannot show the rated performance due to the internal temperature increase.

Moreover, components deteriorate and it may result in smoke or fire.

Remove wiring to and from the product when work like welding near it is done.

Do not wipe the equipment with a dust cloth wet with chemicals (thinner or the like) or water.

Otherwise, it may result in an electric shock, electric leakage, or burnout due to water getting inside.

Regarding fan replacement

When products equip a fan, it has a lifetime. It will be worn out and deteriorated with the time passed and its

operation may become unstable. Also, its lifetime greatly varies depending on the usage environment such as

temperature, humidity, dust. It requires to be replaced at regular intervals to extend the lifetime. For the

replacement, contact us.

(It requires a replacement charge separately. Do not replace it by yourself, as there is a risk of electric shock.)

Table of Contents

DOPF series

Table of Contents

Introduction..............................................................................................................................................................11

Introduction.......................................................................................................................................................11-1 Unpacking and Inspection................................................................................................................................11-2 Transportation..................................................................................................................................................11-3 Installation Conditions......................................................................................................................................21-4 Precautions for Use..........................................................................................................................................21-5 Approach to Problem Solving...........................................................................................................................31-6 Response Speed..............................................................................................................................................31-7

Model Lineup...........................................................................................................................................................42

List of Models...................................................................................................................................................42-1 External View ...................................................................................................................................................62-2

External view A (No communication option).............................................................................................62-2-1

External view A (with communication option) ...........................................................................................82-2-2

External view B..........................................................................................................................................92-2-3

External view C........................................................................................................................................102-2-4

External view D........................................................................................................................................122-2-5

Dimensions.....................................................................................................................................................132-3

Dimension A............................................................................................................................................132-3-1

Dimension B............................................................................................................................................152-3-2

Dimension C............................................................................................................................................162-3-3

Dimension D............................................................................................................................................18

2-3-4

Instruction for Handling.........................................................................................................................................193

Overview.........................................................................................................................................................193-1 Connection to the load ...................................................................................................................................193-2 Connection of AC input cable.........................................................................................................................203-3 Remote sensing (DC output only)..................................................................................................................203-4 Other Function................................................................................................................................................213-5 Overcurrent Protection...................................................................................................................................213-6 Output Range.................................................................................................................................................213-7

Table of Contents

DOPF series

Operation Setting ...........................................................................................................................................223-8

Normal Operation....................................................................................................................................233-8-1 OUTPUT ON / OFF..........................................................................................................................253-8-1-1 MODE SET.......................................................................................................................................253-8-1-2 SIGNAL SWITCH.............................................................................................................................263-8-1-3 VOLTAGE / CURRENT SET............................................................................................................273-8-1-4 ITEM SWITCH..................................................................................................................................283-8-1-5 WAVEFORM SET ............................................................................................................................293-8-1-6 FREQUENCY SET...........................................................................................................................303-8-1-7 PHASE / ON DUTY SET..................................................................................................................313-8-1-8 DISPLAY SWITCH...........................................................................................................................333-8-1-9 MEMORY........................................................................................................................................343-8-1-10 OVP (Overvoltage protection) / OCP (Overcurrent protection)......................................................363-8-1-11 Measurement setting......................................................................................................................383-8-1-12 KEY LOCK......................................................................................................................................403-8-1-13 Voltage monitor ..............................................................................................................................403-8-1-14 Current monitor...............................................................................................................................403-8-1-15

Sequence ................................................................................................................................................413-8-2 Sequence feature.............................................................................................................................413-8-2-1 Sequence Spec................................................................................................................................423-8-2-2 Transit to sequence operation (from normal operation)...................................................................443-8-2-3 State of sequence program..............................................................................................................463-8-2-4 Recall of the program data whose program number is specified ....................................................513-8-2-5 Sequence program and parameters ................................................................................................523-8-2-6 Procedure for parameter of program................................................................................................583-8-2-7 Procedure for parameters of step.....................................................................................................633-8-2-8 Save sequence program..................................................................................................................773-8-2-9

Option....................................................................................................................................................................82

Remote ON/OFF Switch (-LS).......................................................................................................................824-1 Interlock (-LD).................................................................................................................................................834-2 Floating ground (-LF)......................................................................................................................................844-3 Master/Slave option (-LMs)............................................................................................................................844-4

Master-slave connection .........................................................................................................................854-4-1

Capacitive load operation........................................................................................................................864-4-2

Cautions when using...............................................................................................................................864-4-3

Setting......................................................................................................................................................874-4-4

Monitor.....................................................................................................................................................884-4-5

Troubleshooting.....................................................................................................................................................89

1Introduction

DOPF series

Introduction

1-1

Thank you very much for your purchase of our product, DOPF series.

Matsusada Precision takes every precaution to ensure the quality of our products. Please follow the

instructions in the manual to ensure full performance and safe use of the product.

We have made every effort to provide all the necessary information in this manual. However, if you notice

any errors or omissions, please contact us.

Unpacking and Inspection1-2

After unpacking the product and checking the power supply, make sure all the following accessories are

included. If an abnormality is found, contact Matsusada Precision.

[Accessories]

□

AC input cable

□

Instruction Manual (this)

□

Option Instruction Manual (when selecting option)

□

CO-OPT cable (for -LGob option)

□

Master-Slave connection cable (for -LMs option)

After unpacking the box, check the panel and chassis for obvious impact such as scratches, dents, or any

abnormalities during transportation If you find any abnormalities, please contact the carrier and us.

Transportation1-3

When carrying the unit, carry it by two or more people. Hold the bottom of the front panel and the rear

panel to carry the unit.

When placing the unit, be careful not to get your fingers caught between the bottom of it and the floor or

so.

Introduction

1Introduction

DOPF series

Installation Conditions1-4

When installing the product, observe the following

Place and use the unit horizontally.

Do not place anything on top of the unit.

Avoid using this unit in locations that are subject to dust and corrosive gas.

Do not install the unit in a place where condensation may occur.

Prevent liquids or metals from entering the unit through the air inlet and outlet. It may result in

malfunction, electric shock, or fire.

The product is designed for a 19-inch rack. Support the chassis with the guide rails of a rack when

installing the unit. Never support it only with the mounting holes on the front panel.

The handles on the front panel are used to change the direction of the unit or pull out the unit

mounted in a rack. Avoid any application that the entire weight of the unit is applied to the handles on

the front panel.

Secure a space at least 30 cm or more in front and back of the unit not to block air inlet and outlet.

Secure openings for air inlet and outlet in an external cabinet as the same size as the unit openings

respectively.

When installing the unit in a closed cabinet, mount forced exhaust to prevent exhaust heat from

returning to the air inlet.

When dust collects in the air inlet, remove it immediately. Otherwise, it may result in malfunction due

to less cooling.

When doing work such as welding near the unit, disconnect all wires from the unit.

This product applies to “High-frequency use equipment”.

DOPF series applies to "high-frequency use equipment" that requires a license for use from the Minister of

Internal Affairs and Communications in accordance with the provisions of Article 100 of the Radio Law.

(This is required when the frequency is 10 kHz and the output power is over 50 W.)

For details on the application for permission, please contact the competent telecommunications bureau.

Precautions for Use1-5 WHEN TOUCHING LOAD AFTER TURNING OFF HIGH VOLTAGE

1. Make the setting of an output voltage to zero (0).

2. Turn off the POWER ON/OFF switch.

3. Check and confirm that the voltage is zero at an output voltmeter of this unit.

Earthling an output for more than 10 seconds, check and confirm that the voltage is zero with

another high voltage meter.

It is especially dangerous that the load is capacitive or a long cableis used.

4. Make it a rule to touch load with right hand.

GROUNDING

1. For the safe operation, be sure to ground the ground terminal of power supply at one point.

2. Make sure to ground properly as per the above sketch Insufficient ground can cause electrical

shock or serious damage to the unit.

3. In case output short circuit or arcing is expected, please make the ground wire shorter and thicker.

Input terminal block

Indice

Altri manuali Matsusada Precision Alimentazione elettrica

Matsusada Precision

Matsusada Precision PZJ Series Manuale utente

Matsusada Precision

Matsusada Precision DOS Series Manuale utente

Matsusada Precision

Matsusada Precision DOKF Series Manuale utente

Matsusada Precision

Matsusada Precision EGD Series Guida all'installazione

Matsusada Precision

Matsusada Precision REK Series Manuale utente

Matsusada Precision

Matsusada Precision PSS2en-DCPS Manuale utente

Matsusada Precision

Matsusada Precision R4G Series Guida all'installazione

Matsusada Precision

Matsusada Precision eK-FGJ Series Manuale utente

Matsusada Precision

Matsusada Precision EGS Series Guida all'installazione

Matsusada Precision

Matsusada Precision R4GT Series Manuale utente

Matsusada Precision

Matsusada Precision PRKT Series Manuale utente

Matsusada Precision

Matsusada Precision DOEF Series Manuale utente

Matsusada Precision

Matsusada Precision ECU Series Manuale utente

Matsusada Precision

Matsusada Precision eK-FG2 Manuale utente

Matsusada Precision

Matsusada Precision AMT Series Manuale utente

Matsusada Precision

Matsusada Precision RE Series Manuale utente

Matsusada Precision

Matsusada Precision ASX-3R5 Manuale utente

Matsusada Precision

Matsusada Precision RK Series Guida all'installazione

Matsusada Precision

Matsusada Precision XR Series Manuale utente

Matsusada Precision

Matsusada Precision EPR Series Manuale utente

Matsusada Precision

Matsusada Precision AK Series Manuale utente

Matsusada Precision

Matsusada Precision ECA Series Manuale utente

Matsusada Precision

Matsusada Precision CD Series Guida all'installazione

Matsusada Precision

Matsusada Precision R4GN Series Guida all'installazione

Manuali Alimentazione elettrica popolari di altre marche

Monacor

Monacor PS-12CCD Manuale utente

VOLTIMA

VOLTIMA MagicBox 15 Manuale utente

Agilent Technologies

Agilent Technologies 6032A Manuale utente

Miller

Miller Auto Deltaweld 452 Manuale utente

BCP

BCP PUOUBK Foglio di istruzioni

HC 2210 Manuale utente

Puls

Puls CT5.241 Manuale utente

OCZ

OCZ ZX1250W Manuale utente

iseg

iseg ECH 238 Manuale utente

Power

Power XXL A Series Manuale utente

Agilent Technologies

Agilent Technologies 6631B Manuale utente

Renogy

Renogy PHOENIX 300 Manuale utente

HP 6200B Manuale di servizio

Epson

Epson Stylus Scan 2500 Manuale operativo

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuale utente

Puls

Puls MiniLine ML50.100 Manuale utente

Puls

Puls AS-Interface SLA4.100 Manuale utente

Kenwood

Kenwood PS-60 Manuale utente