Max Bepop CPM-200G Manuale utente
CPM-200
OPERATION MANUAL
●Readthismanualbeforeoperation.
●Keepthismanualinasafeplace.
●Itisprohibitedtoreproducepartorallofthemanualwithoutourpermission.
●Theinformationinthemanualissubjecttochangewithoutpriornotice.
IL22610(00/02)
2
CONTENTS
Contents
BeSuretoReadThese
Introduction …………………………………………………………………………………………………………… 3
Conventions Used in This Manual ………………………………………………………………………………… 3
Precautions for Use ………………………………………………………………………………………………… 4
Disclaimers …………………………………………………………………………………………………………… 4
ProductSpecications ……………………………………………………………………………………………… 5
BeforeUse
Package Contents …………………………………………………………………………………………………… 6
Component Names…………………………………………………………………………………………………… 6
Main Key Functions ………………………………………………………………………………………………… 6
MachinePreparation
Loading the Tape……………………………………………………………………………………………………… 7
Inserting the Rellable Ribbon Cartridge ………………………………………………………………………… 8
Replacing the Ribbon Rell ………………………………………………………………………………………… 9
Installing (Replacing) the Cutting Tool (Blade) ……………………………………………………………………11
Adjusting the Cutting Pressure…………………………………………………………………………………… 12
Connecting the Cable and Turning On the Power ……………………………………………………………… 13
BepopPCEXSoftwareInstallation
Please read before installing. …………………………………………………………………………………… 14
BepopPC EX Printer Driver Installation ………………………………………………………………………… 15
CPM-200 IPAddress Settings …………………………………………………………………………………… 20
Firstlet’sgiveitatry!
Make a sign layout.………………………………………………………………………………………………… 22
Check the remaining sheet length. ……………………………………………………………………………… 25
Adjusting the print tempurature…………………………………………………………………………………… 26
Making a cutting layout, and cutting a sign……………………………………………………………………… 27
How to apply cut letter designs…………………………………………………………………………………… 28
Uninstallmethod
How to uninstall “BepopPC EX”. ………………………………………………………………………………… 31
Printer Uninstall …………………………………………………………………………………………………… 32
HowtouseBepop-net …………………………………………………………………………………………… 32
TroubleShooting …………………………………………………………………………………………………… 33
3Be Sure to Read These
BeSuretoReadThese
Introduction
Thank you for purchasing the CPM-200.
The CPM-200 is a 200 mm width signs and labels creating machine that enables anyone to easily create
displays, such as signboards and guide displays, and colorful, high quality labels. To maximize service life of
the product, please use the CPM-200 in accordance with operation manual.
ConventionsUsedinThisManual
■Indications
The manual and machine use various indications to ensure that you can use the machine safely and correctly.
The following describes the indications:
WARNING NEGLIGENCEOFTHISCOULDLEADTOADEATHORSERIOUS
INJURYOFAWORKER.
CAUTION NEGLIGENCEOFTHISCOULDLEADTOANINJURYOFA
WORKER,DAMAGEYOURMACHINE,ORCAUSECREATEDDATA
TOBELOST.
■Symbols
Denotes“whatyou
shouldbeawareof.”
A specic caution is given in
or close to this symbol.
Denotes“whatyou
mustnotdo.”
A specic prohibition is given in
or close to this symbol.
Denotes“whatyoumust
do.”
A specic instruction is given
in this symbol.
4
Be Sure to Read These
PrecautionsforUse
WARNING
●Donotinsertanyforeignobjectintothemachine,
suchasanger,pen,wire,etc.
It could malfunction or result in a re, electric shock, or injury.
●Neverputahandoranobjectintoacuttersection.
It can both cause machine damage and personal injury.
●Usethesuppliedpowercord.
Not using it could result in a re or electric shock.
●Obtainpowerdirectlyfromanelectricaloutlet.Do
notputmultipleloadsontheelectricaloutlet.
It could cause a re.
●Donotmodifythepowercord.
Doing so could cause a re or electric shock.
●Neverplaceaheavyobjectonapowercord.
It may damage the cord, resulting in a re or electric
shock.
●Donotuseabundledpowercord.
The emitted heat may cause a re or malfunction.
Be sure to unbundle the power cord before use.
●Donotconnectordisconnectapowerplugwitha
wethand.
You could receive an electric shock.
●
Donotoperatethemachinewithwethandsorwetclothes.
You could receive an electric shock.
●Donotplaceapaperclothonthemachinewhenitis
connectedtoanoutlet.
Doing so could cause a re or malfunction.
●Whendisconnectingthepowerplug,holditdirectly;
neverpullonthepowercord.
Pulling on the cord can damage it, resulting in a re or
electric shock.
●Ensurethatnowaterorchemicalsaresplashed
overthemachines.
If water, etc., gets inside for some reason, disconnect the
power plug immediately from the electrical outlet, and
contact your dealer for repair. If the machine
is used in
such a state, it could malfunction or result in a re or
electric shock.
●Donotusethemachineifithasasymptomofaproblem.
Such as smoke, abnormal sound, or foul odour.
Using the machine in such a state could result in a re
or electricshock.
Insuchacase,immediatelydisconnectthepower
plugfromtheelectricaloutlet,andcontactyour
dealerforrepair.
●Neverdisassembleorremodelthemachine.
It could result in a re, electric shock, or trouble.
●Runthemachineonlyontheindicatedsupply
voltage.
Use of any other voltage could result in a re or trouble.
● Besuretogroundthemachine.
Otherwise, if a short circuit occurs, a re or electric
shock may result.
● Cleanthepowerplugperiodically.
Dust accumulated over a long period could cause a re
or trouble.
●Keepthecuttingtool(blade)outofthereachof
children.
If swallowed, seek immediate medical attention.
CAUTION
●Installthemachineonaatsurface.Donotinstallin
anunstablelocation,suchasonawobblyplatform
oraninclinedsurface.
The machine could fall over or fall from the platform and
cause injury or malfunction.
●Donotusethemachineunderdirectsunlight,ina
hot,humidlocation,orwhenthereiscondensation.
It may cause unstable operation or a malfunction.
●
Donotshareanelectricaloutletwithanydevice
(airconditioner,refrigerator,microwave,ofce
automationequipment,etc.)thatrequiresalarge
capacity.
It could lower the supply voltage and cause the machine
to malfunction.
●DonotdirectlytouchtheUSBconnectorwithyour
hands.
Static electricity may cause trouble.
●Whennotusingthemachineforalongtime,besure
todisconnectthepowerplugfromtheelectrical
outletforsafety.
●Whenmovingthemachine,besuretodisconnect
thepowerplugfromtheelectricaloutlet.
Moving the machine with the power plug connected to
the electrical outlet may damage the plug or cord and
cause a re or electric shock.
●Whenprintingorcuttingdoesnotfunctionproperly
duetojammingofanadhesivetape,ribbonrell,or
foreignobjectinsidethemachine,besuretoturnoff
thepowerbeforeeliminatingjamming.
Otherwise, you could be injured by abrupt activation of
the machine.
●Whenopeningorclosingadoorcover,becareful
nottogetahand,etc.,caught.
●Whenmovingthemachine,besuretoclosethedoor
coverandholdthebottomofthebodytocarryit.
Neglecting this could cause an injury or trouble.
●Whenreplacingthecuttingtool(blade),besureto
turnoffthepower.
Otherwise, you could be injured by abrupt activation of
the machine.
●Notethattheedgeofthecuttingtool(blade)isvery
sharp.
Do not touch it. You may be injured.
●Nevertouchtheprinthead.
Immediately after printing, it is very hot and could burn
you. Also, if the printing head is thumbed, it may cause
trouble.
●Datasavedinapersonalcomputercannotbesaved
permanently.
We cannot be responsible for damage due to loss of
data attributable to trouble or repair, or lost prot.
Disclaimers
MAX will not be held responsible for any damages that occur as a result of not following the instructions in this
manual, damages and lost prots resulting from not being able to use the machine (malfunction), or any relevant
secondary damages.
5Product Specications
ProductSpecications
Product CPM-200G
Printer section
Printing method Thermal transfer
Printing density 300dpi
Printing speed 1.0”/sec. (25mm/sec.)
Cutter section Resolution 0.001”/step (0.025mm/step)
Cutting speed 4.7”/sec. max (120mm/sec. max) (axial direction)
Maximum output range 8” × 78.7” (200 × 2,000mm)
Interface USB2.0
LAN 100baseTX
Working environment Temperature 50 - 80°F(10 - 27°C) (77°F(25°C) recommended for
process color)
Humidity: 35 - 70 % (No dew condensation allowed)
Power input AC 100 - 240 V 50/60 Hz
Rated current 2A
Outer dimensions 13.8” × 12.4” × 12.4” (425mm × 315mm × 315mm)
(W) × (D) × (H)
Mass (Main body only) 34.2lbs (15.5 kg)
* Design, specications, and the like are subject to change without notice.
FCCCAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
6
Before Use
BeforeUse
PackageContents
Open the package and conrm that all of the following items are included.
(1) CPM-200 (2) Power Cord (3)Cutting Tool (Blade)
(1 pc.) (4)
Weeding Tool (5) Squeegee
(6)
Blade Holder
(Attached upon
shipment)
(7)
Blade Holder
Replacing Spanner (8)
PC Software
(CD-ROM) (9)
Operation Manual
(this manual)
ComponentNames
[FrontofMainBody] [BackofMainBody]
Door Cover
Tape Outlet
LED Lamp
Cutting Pressure Control Dial
Scissors Button
Tape Reverse Button
Tape Feed Button
Power Button USB Connector
Front bar
Opening/Closing Lever Print Head
Blade Holder
Cutting Head
Tape Retainer
Sprocket Pins
Power Connector
Tape Holder
[Consumables]
MainKeyFunctions
Powerbutton : Used to turn on/off the power.
LEDlamp : Illuminated in green when the power is turned on.
It is illuminated or blinks in red when informing you of an error.
(For details on errors, see the status monitor information displayed on the PC screen.)
Tapefeedbutton : Tape is fed while the button is held down.
Tapereversebutton : Tape is reverse-fed while the button is held down.
Scissorsbutton : Used to fully cut the tape.
Tape Roll
Ribbon Rell
Rellable Ribbon
Cartridge
Hinges
Ribbon Gears (4 pcs.)
Hinges
Sprocket Holes
7Machine Preparation
MachinePreparation
LoadingtheTape
1
Pull up the opening/closing lever to open the door
cover.
5
Align the holes in the tape with the right and
left sprocket pins.
Opening/Closing Lever
Door Cover Sprocket Pins
Ensure that the sprocket pins are inserted in the
sprocket holes in the tape and that the tape is
loaded straight on the roller.
If the sprocket pins are not inserted into the holes
or the tape is not straight, the tape will not be fed
properly.
2
Pull up the front lever. Load the tape straight.
Front bar
Vinyl Holder
Yes No
3
Place the tape on the tape holder.
Vinyl
6
Lower the front lever to retain the tape.
Front bar
4
Pull the tape forward and feed it under the bar
at the front. Then, feed the tape further into the
rollers in the back.
Roller in the Back
Vinyl Retainer
Front bar
7
Close the door cover until it “clicks” to lock.
8
Machine Preparation
InsertingtheRellableRibbonCartridge
1
Pull up the opening/closing lever to open the door
cover.
3
Fit the Hinges of the rellable ribbon cartridge into
the slots in the back of the door cover. Ensure
that the ribbon gear color matches the colour
printed on the CPM-200.
Opening/Closing Lever
Door Cover
Orange
Green
4
Turn the rellable ribbon cartridge upward, using
the Hinges as leverage. Push it in rmly until
the rellable ribbon cartridge locks with a “click”
sound.
2
Check for slack in the ribbon rell.
If there is slack in the ribbon rell, hold the
rellable ribbon cartridge as shown in the gure,
turn the ribbon gear in the arrow-indicated
direction, and take up the slack.
Click
Ribbon Refill
Hinges
Hinges
RemovingtheRellableRibbonCartridgefromtheCPM-200
1
Open the door
cover. Hold the
rellable ribbon
cartridge catch
and pull it forward.
Catch
CAUTION
Donottouchtheprinthead.
Getting burned or a malfunction may
result.
2
Turn the cartridge
downward and
then pull it out.
9Machine Preparation
ReplacingtheRibbonRell
1
Open the door cover. Hold the rellable ribbon
cartridge catch and pull it forward.
5
Prepare the new ribbon rell.
Catch
Transparent Frame
Retaining Tape
Take Up Core
Take Up Core
2
Turn the cartridge downward and then pull it out.
6
Insert two gears (one orange, one green) into
the take up core on the transparent frame side.
Ensure the at edges are face up.
※交換手順の詳細は箱に印字の説明を参照ください。
リボンギヤ取付位置とリボン取付方向
赤
緑
赤
緑
透明枠
Transparent FrameRetaining Tape Green
Orange
Flat
edge up
Flat
edge up
3
Open the cartridge cover and remove the old
ribbon rell.
7
Place the transparent frame side of the ribbon
rell into the cartridge on the at cover side.
If the cover is difcult to open, pull up the location
indicated as ①and then ②.
Green
Orange
Label
Flat Cover
4
Remove the four gears (two orange, two green)
from the ribbon rell take up core. Firmly insert the protruding part of the orange
gear into the recessed part of the cartridge.
Orange Green
The shape of the orange gears are different from
that of the green gears.
Orange Green
Ribbon Refill
Flat Cover
①
②
Indice
Altri manuali Max Etichettatrice
