Page 10 Mega-MaxTM 6000 Use and Maintenance Manual
1.4 - FOREWORD
The regulations/instructions for use contained in this manual constitute an essential component of the supplied
compressor.
These regulations/instructions are intended for an operator who has already been trained to use this type of
compressor. They contain all the information necessary and essential to safety and efficiency, proper use of the
compressor.
Hurried, incomplete preparation results in mistakes and this often leads to accidents.
Before beginning work, read the following suggestions carefully:
1) before using the compressor, gain familiarity with the tasks to be completed and the admissible working
position;
2) the operator must always have the instruction manual on hand;
3) program all work with due care and attention;
4) you must have a detailed understanding of where and how the compressor is to be used;
5) before starting work make sure that safety devices are working properly and that their use is understood; in
the event of any doubts do not use the compressor;
6) observe the warnings given in this manual with due care and attention;
7) constant and careful preventive maintenance will always ensure a high level of safety when using the
compressor. Never postpone repairs and have them carried out by specialized personnel only; use only
original spare parts.
1.5 - WARRANTY
Max-Air shall repair or replace those parts it acknowledges to be faulty during the warranty period.
In replacing the faulty part Max-Air shall not be liable for any other expenses sustained by the dealer or his
customer such as presumed damage (present or future), lost earnings or fines.
Routine and unscheduled maintenance must be carried out in compliance with the instructions contained
in this manual. Should the required work not be covered by the manual or assistance be required you are
advised to contact Max-Air directly by email, even where agreements have already been made on the phone.
Max-Air cannot be held liable for any delays or failure to execute work.
Max-Air cannot be held liable for any damage or malfunctions caused by work carried out on the compressor
by unauthorized personnel.
IMPORTANT:
Chap. 1 - General
The materials supplied by Max-Air are covered by a 12-month warranty, the validity of which begins on the
date of delivery as proven by the delivery document.
Max-Air guarantees that its compressors are free from defects vis-à-vis design, workmanship and the used materials
for a period of 12 months starting from the date of delivery of the compressor; should the customer note any flaws
and/or defects they must report them, in writing, to Max-Air within 14 (fourteen) days of delivery otherwise the
warranty could be rendered null and void. The warranty only covers flaws and faults that occur where the
compressor is used properly in compliance with the instructions contained in this manual and where periodic
maintenance is carried out. The warranty does not cover faults caused by improper use of the compressor,
exposure to atmospheric agents (rain etc.) or damage during transport; all materials subject to wear and those
subject to periodic maintenance are not covered by the warranty and are to be paid for by the customer in full; in
any event the warranty is rendered null and void if the compressor is tampered with or if work is carried out on it by
personnel who have not been authorized by Max-Air.
