Maxell SSB-3 WB Quick Start Guide
Connect using Bluetooth
Connect to a Bluetooth Device
You can listen to music from a Bluetooth-enabled device via this SoundDeck.
Pairthe Bluetooth-enabled device
The first me you connect your Bluetooth device to this speaker system, you need to
pair your device to the speaker system.
1. Turn on the Bluetooth funcon on your device.
2. Press the “BT/PAIR” buon on the remote control or the buon on the touch
panel of the SoundDeck. The Blue LED on the front panel of the SoundDeck should
begin flashing slowly (search mode).
3. Search for a Bluetooth device with your device. The name “SSB-3WB” will appear
on your device’s list.
4. Select “SSB-3WB” in the pairing list on your device and your device will
automacally pair with the SoundDeck.
5. Once the SoundDeck is successfullypaired with your device, the Blue LED on the
SoundDeck will remain steadily ON for 5 full seconds and your device will show
“connected” or “paired”. (All LED indicators turn OFF aer 5 seconds to avoid any
annoyance or distracon to the user.)
6. To disconnect the connecon, turn off the Bluetooth funcon on your device or
switch the speaker’s input to another source.
Listen to music from Bluetooth device
•If the connected Bluetooth device supports the Advanced Audio Distribuon
Profile(A2DP), you can listen to the music stored on the device through the
speaker system.
•If the device also supports Audio Video Remote Control Profile (AVRCP), you can
use the speaker’s remote control to play music stored on the device.
1. Pair your device with the SoundDeck.
2. Start to play music via your device (if it supports A2DP)
3. Use the supplied remote control to control playback (if it supports AVRCP)
- To pause/resume play, press the buon.
* For more detailed informaon and some helpful ps for using the Bluetooth feature,
please refer to the Bluetooth secon on page 10 of the SoundDeck User Manual.
