MAXHUB ND86CMA Manuale utente
Commercial Display
User Manual
Model: ND86CMA
TABLE OF CONTENTS
Contents
-——————————————————————————————————————————— 01
1.Safety Warning
-——————————————————————————————————————— 02
2.Control Panel
-———————————————————————————————————————— 05
3.Connection and Setting
——————————————————————————————————— 10
4.Simple Troubleshooting
——————————————————————————————————— 12
5.Maintenance
-———————————————————————————————————————— 14
01
6.Statement
-—————————————————————————————————————————— 15
02
1. Safety Warning
Before operating, please read this manual thoroughly, and keep it for future reference. Image shown in this manual is
indicative only. There may be differences between the pictures and the actual product, please prevail in kind.
• Placement
DO NOT put heavy objects on top of the unit.
DO NOT put the unit near appliances that generate magnetic fields.
DO NOT expose the unit to direct sunlight and other sources of heat.
DO NOT place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
DO NOT put any liquid near or on the unit, make sure do not spill any liquid inside the unit.
• Power Supply
Please keep power cable from physical or mechanical damage.
Please check and ensure AC source is connected with the ground.
This power cable comes with the device exclusively for this device only.
Please unplug power supply when the weather is thunder-storm or lightning.
Check that the unit's operating voltage is identical with your local power supply.
Please use the original power cable from the accessory bag, don't modify or lengthen it.
Please unplug power supply, when there is nobody home or the unit will be in idle for a long time.
Note: All the pictures in this manual are for reference only, subject to our available products.
03
• LED Screen
Unplug the power cable before cleaning.
Clean the screen with a soft, dustless and dry cloth.
For deep clean, please contact an authorized service center.
Never use water or the spray type detergent to clean the unit.
Better for the panel lifetime and the display performance, do not display high brightness image for long time.
Suitable operating time: under 16hours a day.
Cycling display between 5 minutes information (static) display and 10 seconds' moving image.
Periodical display contents should be changed from static image to moving picture.
Periodical power-off the system for a while or screen saver is needed after long-term static display.
Black image or moving image is strongly recommended as a screen saver.
• Temperature
Normal operating temperature is 0 ~ 40℃.
Do not place the unit near or over a radiator or a heater.
If your unit is suddenly moved from a cold to a warm place, please unplug the power cable and do not turn it on at
least 2 hours, making sure the moisture inside the unit is all evaporated.
• Humidity
Do not expose the unit in rain, or place in high humidity area.
Please make sure indoor environment is dry and cool.
Normal operating humidity is 10%~90%RH.
• Ventilation
Please put the unit in a well-ventilated place, so the heating can be released easily.
Ensure that the unit has enough space for ventilation. Space requirement: left, right and back >10cm, top> 20cm.
• Earphone
Before using earphone, please turn down the volume in advance.
Using the earphone to listen loud sound for a long time might affect the hearing.
• Standby
It will enter standby mode but not turn off the unit after press the standby key.
04
• Battery
Please make sure the battery gets proper disposal or recycle after using.
Please keep the battery away from kids and don't throw the battery into fire.
Caution risk of fire or explosion if the battery is replaced by an incorrect type.
• Notes for Cleaning
There are vents on back cover, please do not use any liquid or spray directly during cleaning.
• Power Switch Status Signs
“I” means power on, “O” means power off.
• Notes for Maintenance
This machine can only be maintained by certified engineer.
• FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the
receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced
radio/TV technician for help
• FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
05
2. Control Panel
(1) Please check connections are correct before starting.
2
1
3
4
5
6
7
8
9
9
9
Number
Power indicator light
Items
: Tap to enter energy-saving, press at least 2 seconds to enter
standby mode
MENU: Pop up Settings menu
: Press to scroll left
: Press to scroll right
INPUT: Pop up channel Setting
: Press to scroll up / Volume up
Loudspeaker
1
2
3
5
6
4
8
: Press to scroll down / Volume down7
9
Note: Different sizes of product horn position is not the same,subject to our available products
06
(2) Terminal Interface
Type 1:
Type 2:
4 5 5 6 2 3 1 9 7 8 10 11
1 2 3 4 5 5 6 5 7
8 9 10 11
07
Number
Connect USB devices such as mobile hard disk, U disk, USB keyboard and mouse, USB drives, etc.
Serial interface, used for mutual transfer of data between devices.
Function description
Connect USB devices such as mobile hard disk, U disk, USB keyboard and mouse, USB drives, etc.
Support charging, data transmission, extension for audio and video output interface, etc.
Note：The maximum rated power of the USB Type-C port of this product is 65W. When using this
port to charge electronic devices, the charging power of the electronic device cannot exceed the
rated power of this port. If the charging power of the electronic device exceeds the rated charging
power of this port, please Do not directly use this port for charging.
Audio output to the external speaker.
Connect to the devices with HDMI input function.
1
2
3
5
4
6
7
Items
2.0
RS232
3.0
HDMI
High-definition multimedia interface signal input, connect to devices with HDMI output interface
(personal computer with HDMI output, set-top box, or another video device).
USB
Type-C
HDMI OUT
AUDIO OUT
Carry multichannel sound via optical signals.8 SPDIF
Connect RJ45 terminals.9 LAN
To open or shut down AC power supply. “I”means power on,“O” means power off.10
AU
SWITCH
AC power input, connect AC power supply.11 AC IN
Note: Differences in the number and location of terminals of different sizes,subject to our available products.
Note:
(1) 43~55 inch: USB Type-C、HDMI 1、HDMI 2 support HDMI OUT; Android channel: not support HDMI OUT.
(2) 65~98 inch: PC channel、USB Type-C、HDMI 1、HDMI 2 Support HDMI OUT；Android channel、
HDMI 3 not support HDMI OUT.
08
(3) Remote Control
• Remote Control Button Instruction
NOTE: All computer - related function keys are not available without a built-in computer.
• Detailed Function Description
1
4
7
8
11
2
3
6
5
10
9
13
12
Number Function description
1
2
3
4
5
6
7
8
9
10
11
12
13
Power on / off
Mute on / off
Up
Left
Down
Right
OK
Settings
Source menu
Back
Increase volume
Homepage
Decrease volume
09
• Remote Control Instruction
Install Batteries
① Open back cover of battery component on the back of remote control.
②Install AAA type battery according to the corresponding electrode, make sure battery positive and negative pole
are correct ("+"to"+", "-" to "-"), please do not mix using old and new batteries.
③ After battery is installed, close the back cover of battery components, and make the following clip buckled to the
bottom.
• Range of remote control
Remote control can work normally within the range of 8 meters distance, 30 degrees left and right from the
remote-control receiver; in order to protect environment, please dispose waste battery into recycling box.
Note: The remote receiver is located at the behind of the panel.
If the battery is replaced by an incorrect type, it may lead to explosion.
Indice
Altri manuali MAXHUB Monitor
