Maximum 058-9317-8 Manuale utente
TABLE OF CONTENTS
QUICK START GUIDE 4
TECHNICAL SPECIFICATIONS 6
SAFETY GUIDELINES 7
KEY PARTS DIAGRAM 12
IMPORTANT INFORMATION 13
ASSEMBLY INSTRUCTIONS 14
OPERATION 16
MAINTENANCE 19
TROUBLESHOOTING GUIDE 21
EXPLODED VIEW AND PARTS LIST 24
WARRANTY 29
2
TABLE OF CONTENTS
model no. 058-9317-8 | contact us 1-888-670-6682
model no. 058-9317-8 | contact us 1-888-670-6682
4
QUICK START GUIDE
Fix the wheels (1) to the tank using the
bolts and nuts. Place the compressor
(2) on the floor or a hard, level surface
in a clean, well-ventilated area.
See step 4 referenced below.
1
Connect the air hose (1)
between the air line outlet (2)
and air tool (3). See page 15,
step 4.
2
Make sure the AUTO/OFF switch
(1) is in OFF position and the drain
valve at the bottom of tank is
closed. See page 16, steps 1-2.
3
2
1
1
2
3
1
1
1
3
2
2
2
1
1
2
3
1
1
1
3
2
2
2
1
1
2
3
1
1
1
3
2
2
5
TM
QUICK START GUIDE
Adjust the hose pressure
gradually with respect to the
operating pressure of the air
tool by turning the pressure
regulator knob (1) clockwise.
See page 17, step 6.
5
Turn the pressure regulator knob (1)
counter-clockwise completely. Plug
in the power cord (2) into electrical
outlet. Turn the AUTO/ OFF switch
(3) to the AUTO position.
See pages 16-17, steps 3-5.
4
2
1
1
2
3
1
1
1
3
2
2
2
1
1
2
3
1
1
1
3
2
2
model no. 058-9317-8 | contact us 1-888-670-6682
6
TECHNICAL SPECIFICATIONS
COMPRESSOR TYPE Oil-less, single stage, direct drive
RUNNING HORSEPOWER 1.5
POWER 120 V, 60 Hz 15A
DUTY CYCLE 50%
TANK SIZE 15 U.S. GALLONS (56.8 L)
MOTOR TYPE Heavy-duty induction motor
CUT-IN PRESSURE 160 PSI (1.10 MPa)
CUT-OFF PRESSURE 200 PSI (1.38 MPa)
COMPRESSOR CAPACITY 5 CFM* @ 40 PSI
4 CFM* @ 90 PSI
PACKAGING WEIGHT 92 lb (41.7 kg)
TECHNICAL SPECIFICATIONS
*CFM: Cubic feet per minute
7
TM
SAFETY GUIDELINES
FPO
FPO
SAFETY GUIDLINES
This manual contains information that relates to PROTECTING PERSONAL SAFETY and
PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully
and understand it thoroughly before using the product. The symbols listed below are
used to indicate this information.
DANGER!
Potential hazard that will result in serious injury or loss
of life.
FPO
WARNING!
Potential hazard that could result in serious injury or loss
of life.
CAUTION!
Potential hazard that may result in moderate injury or
damage to equipment.
SAFETY RECOMMENDATIONS
These precautions are intended for the personal safety of the user and others working
with the user. Failure to follow these instructions may result in a permanent loss of
vision, serious personal or even fatal injury, property damage, and/or tool damage.
Please take the time to read and understand them.
DANGER!
Potential hazard that will result in serious injury or loss of life.
• Keep bystanders, children, and visitors away from the work area while operating
the compressor. Do not allow children to handle the compressor. Distractions can
affect the control over compressor.
• Never direct compressed air, dust, or dirt toward yourself, other people or animals
to reduce the risk of serious injury.
• Wear a face or dust mask or use a respirator in dusty environments or when
spraying paint.
• Never remove the pressure switch housing at anytime.
• Never use the compressor in a combustible environment or in the presence of
combustible materials, such as flammable chemicals, adhesives, gasoline or
solvents, as the internal combustion produces hot exhaust gases that may ignite
flammable materials. Failure to observe this warning can cause explosion and
serious personal injury or death.
• Risk of inhalation. Operate the compressor in an open area at a minimum of
12” (30 cm) away from any wall or object that could restrict the flow of fresh
air to ventilation openings. Do not use the compressor to spray chemicals, as
doing so may affect your lungs by inhaling toxic fumes. Use a respirator in dusty
environments or when spraying paint.
8
model no. 058-9317-8 | contact us 1-888-670-6682
SAFETY GUIDELINES
• Risk of bursting. Do not adjust the pressure regulator knob to increase the output
pressure to greater than the maximum rated pressure of the air tool attached to the
compressor.
WARNING!
Potential hazard that could result in serious injury or loss of life.
• Do not allow inexperienced or untrained individuals to operate the compressor.
• Before servicing the compressor, always disconnect the power supply and open the
drain valve to decompress the air tank. Make sure water is drained. Wait until the
compressor becomes cool.
• Turn the pressure regulator knob fully clockwise after shutting off the compressor,
to avoid accidental rise in pressure when starting the compressor.
• Use head protection accessory such as hard hat, if required. It must conform to
American National Standards Institute (ANSI Z89.1) requirements.
CAUTION!
Potential hazard that may result in moderate injury or damage to equipment.
• Do not wear watches, rings, bracelets, or loose clothing when using the compressor.
Keep your hair, clothing, and gloves away from moving parts.
• Use the compressor only for its intended purpose. Do not alter or modify the
compressor from its original design or function.
• Do not use a compressor that is malfunctioning or with loose, missing or damaged
parts, or that requires repairs. Verify that all screws are securely tightened.
• Keep the compressor and work area clean and well lit. A cluttered or dirty place
may lead to an accident. Floors should be kept clear.
• Do not misuse the power cord. Never use the cord to carry the compressor. Always
use grip handle to move it. Remove the power plug from the power supply outlet
after use.
• Do not operate the compressor if it does not contain a legible warning label.
• Never use the compressor when there is air or water leakage.
• Store the compressor in a dry location, out of reach of children and other untrained
persons.
FPO
CAUTION!
Potential hazard that may result in moderate injury or
damage to equipment.
FPO
WARNING!
Potential hazard that could result in serious injury or loss
of life.
9
TM
SAFETY GUIDELINES
• Always maintain the compressor the compressor properly to avoid internal
corrosion and possible failure.
• Release all pressure within the compressor slowly, as the dust and debris is harmful
and affect human health.
• Keep the exterior of the compressor dry, clean, and free from oil and grease.
Always use a clean cloth for cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean the compressor to reduce the risk of
deterioration of the plastic enclosure.
• When servicing the compressor, use only replacement parts of same specification
to avoid risk of injury and equipment damage.
• Drain out the moisture from the tank completely after each day’s use to prevent
corrosion on the inside of the tank.
• Before using the compressor, check for damaged parts, misalignment or binding
of moving parts, broken parts, and any other condition that affects the operation.
The damaged parts should be properly repaired or replaced only by a qualified
electrician. The repaired part should be checked carefully to ensure that it operates
properly and performs its intended function.
• Use the proper extension cord. Make sure to use an extension cord that is suitable
to carry the current required by the air tool. A wire of 12 gauge size is recommended
for an extension cord of length 50’ (15 m) or less. It is not recommended to use a
cord exceeding 100’ (30 m). If in doubt, use the next heavier gauge. An undersized
cord will cause a drop in line voltage, resulting in loss of power and overheating of
the air tool.
• Ensure compressor is plugged into a circuit protected by a fuse or breaker.
• Inspect the air tank yearly for rust, pin holes, or other imperfections. Never weld or
drill holes in the air tank.
• Use safety glasses and ear protection. Wear safety glasses with side shields when
operating the tool and verify that others in the work area are also wearing safety
glasses. Safety glasses must conform to American National Standards Institute
(ANSI Z87.1) requirements and must provide protection from flying particles from
the front and the sides. Compressors are loud and the sound can cause hearing
damage. Always wear ear protection to help prevent hearing damage and loss.
Failure to comply may result in moderate injury.
10
model no. 058-9317-8 | contact us 1-888-670-6682
SAFETY GUIDELINES
SAFETY INSTRUCTIONS FOR USING AIR TOOL
• The air tool is not a toy. Careless and improper use of the tool may result in serious
accident.
• Never leave or store the tool with air hose attached to avoid accidental start of the
tool and serious personal injury.
• Protect air hose from damage or puncture. Keep the air hose away from sharp
objects, chemical spills, oil, solvents, and wet floors.
• Make sure the hose is free of obstructions or snags. Entangled or snarled hoses can
cause loss of balance or footing and may become damaged.
• Inspect the power cord of the tool and air hose before each use. Ensure that all
connections are secure. Do not use a damaged hose. Have a qualified electrician to
repair or replace the damaged part.
• Stay alert, and use common sense when operating the tool. Do not use the tool
when you are tired or under the influence of drugs, alcohol, or medication.
• Do not overreach. Keep proper footing and balance at all times to enable better
control of the tool in unexpected situations.
• For personal safety, use an extension cord marked as “W-A” or “W” while operating
the tool outdoors.
• Maintain the tool with care.
• Make sure the tool is serviced only by a qualified technician.
• Store idle tools out of reach of children and other untrained persons.
• Always wear eye protection when using the tool. If required, use a dust mask, non-
skid safety footwear, a hard hat or hearing protection.
WARNING!
This manual contains important safety and operating
instructions for your air compressor. Before using the
compressor, read all instructions and warnings in the Safety
Guidlines.
FPO
Indice
Lingue:
Altri manuali Maximum compressore d'aria
