Maximum 057-2330-8 Manuale utente
TABLE OF CONTENTS
TABLE OF CONTENTS
NOTE: If any parts are missing or damaged, or if you have any
questions, please call our toll-free helpline at 1-888-670-6682.
Parts list
Assembly 5
Specifications
Safety guidelines 10
Operation
Warranty
3
SAVE THESE INSTRUCTIONS.
This manual contains important safety and operating
instructions. Read all instructions and follow them with
use of this product.
TM
CONSERVEZ CES INSTRUCTIONS.
11
15
4
9
PARTS LIST
4
F. Workpiece Supports x2
D. Wheels x2
C. Wheel Axle x1
E. Handle x1
NOTE: If any parts are missing or damaged, or if you have any
questions, please call our toll-free helpline at 1-888-670-6682.
G. Locking Knobs x2
Model No.057-2330-8 | Contact us: 1-888-670-6682
B. Bracket x1
J. Mounting Brackets ×2
H. Blocker x2 I. Spring x2
Hex Bolt M6x35 x4
K
Flat Washer x8
Nut x8
M1 M6 x4
M2 M8 x2
M3 M12 x2
M
O
Bolt M6x15 x4
L
L1. M6 x6
L2. M8 x2
NBolt M6x35 x2
A.Table x1
WARNING
Ensure that the saw stand is stable and that all locking
pins have been engaged.
Assembling the Saw Stand
Carefully remove all parts included in the
delivery from their packaging.
ASSEMBLY
5
TM
Put the wheel axle C through the hole of the ( )
4
3
5
2
2
4
5
3
bracket (B) (step ) Secure in place using flat.
washer (M3) (step ), wheel (D) (step ),
1
2 3
1
Installing the Wheels (see Figs. 1 and 2)
Fasten the bracket (B) to the table (A) with
bolt (K) and nut (L1) .
2
washer (M2) (step ), and nut (L2) (step )
4 5
Repeat with the other wheel.
1
.
Model No.057-2330-8 | Contact us: 1-888-670-6682
6
4
5
Setting up the Saw Stand (see Figs. 4 and 5)
Lay the saw stand upside down on the
floor (legs facing upward).
Push the locking pin in and tilt the leg
upward until the lock pin can be heard to
engage Repeat with the other three legs. .
Flip the saw stand back to the working
position.
firmlyagainst the floor (step
Tighten the lock nut again (step
The saw stand is easily levelled with
its height-adjustable legs.
Loosen lock nut (step
the leg in or out until the saw stand
is aligned level and all four legs are
) and screw
).
).
1
2
3
3Installing the Handle (see Fig. 3)
Insert the handle (E) onto the two tubular
brackets on the end of the table (A) and
secure in place with bolt (N) and nut (L1).
31 2
ASSEMBLY
7
TM
7
)
6
Loosen the locking knobs (step
Pull the table extensions out to the
desired length (step ) and secure
the table extensions by tightening
the locking knobs.
Insert the workpiece supports (F)
into the table extensions (step ).
Adjust the height of the workpiece
supports (F).
Tighten the locking knobs (G) with
spring (I) and blocker (H) to lock
1
2
3
4
Extending the Saw Stand
(see Figs. 6and7)
22
1
3
4
the workpiece support (F) (step ).
WARNING
Ensure that the saw stand is stable and that all locking
pins have been engaged.
ASSEMBLY
Model No.057-2330-8 | Contact us: 1-888-670-6682
8
6
8
7
Fastening the Mounting Brackets
onto the Saw Stand (see Figs. 6 and 7)
Push the locking pin (step ) and
open the locking handle (step ).
Align both mounting brackets (J)
parallel to each other. Position the
mounting brackets (J) on the saw
stand and push the locking handle
down until the locking pin can be
heard to engage.
Adjusting the Mounting Brackets
(see Fig. 8)
After intensive use of the saw stand,
the mounting brackets may require
readjustment. Turn the mounting
brackets (J) upside down and screw
the adjustment screw in clockwise/
counter-clockwise direction
according to your needs.
1
2
1
2
ASSEMBLY
9
TM
500 lb (226.8 kg)
Length of saw stand without table extensions 45 1/4'' (1.15 m)
Length of saw stand with table extensions 8' 2" (2.5 m)
Maximum height 32 5/16" (82 cm) from ground to tabletop
Max
500 lb
The maximum load (power tool and workpiece) of the saw
stand is 500 lb (226.8 kg). Do not overload the saw stand
and do not use it as a ladder or scaffolding.
(226.8 kg)
Weight 43 lb (19.5 kg)
SPECIFICATIONS
SPECIFICATIONS
Maximum load
WARNING
45 1/4'' (1.15 m)
32 5/16"
(82 cm)
8' 2" (2.5 m)
Model No.057-2330-8 | Contact us: 1-888-670-6682
10
SAFETY GUIDELINES
General Safety Rules
Read all warning notes and instructions enclosed with the saw stand and the
power tool to be mounted. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Safety Warnings for Saw Stands
Pull the plug from the mains receptacle and/or remove the battery from the
power tool before making adjustments on the tool or changing tool
accessories.
Unintentional switching on of the power tool is the cause of many accidents.
Assemble the saw stand in the proper manner before mounting the power tool.
Proper assembly is important to prevent the risk of a collapse of the saw stand.
Attach the power tool securely to the saw stand before using it. Slipping of the
power tool on the saw stand can lead to loss of control.
Place the saw stand on a firm, level and horizontal surface. If the saw stand can
slip off or wobbles, the power tool or the workpiece cannot be uniformly and
securely guided.
Do not overload the saw stand and do not use it as a ladder or scaffolding.
Overloading or standing on the saw stand can lead to the upward shifting of the
centre of gravity of the stand and its tipping over.
When working or transporting, take care that all bolts and connecting elements
are firmly tightened. The mounting brackets sets for the power tool must
always be firmly locked. Loose connections can lead to instability and inexact
sawing.
When the power tool is mounted to the mounting brackets, operate it
exclusively on the saw stand. Without the saw stand, the power tool with the
mounting brackets on does not stand securely and can tip over.
Ensure that long and heavy workpieces do not affect the equilibrium of the saw
stand. Long and/or heavy workpieces must be supported at the free end.
Keep your fingers clear of the hinge points while putting the saw stand
together or pulling it apart. Otherwise, your fingers may get crushed or
contused.
WARNING
This manual contains important safety and operating
instructions. Read all instructions and follow them with
use of this product.
Indice
Altri manuali Maximum Rack e supporto
